Hosa DTP-805, DTP-804, DTP-802, DTP-803 User Manual

DTP-800 SERIES

Balanced Snake, DB25 to 1/4 in TRS, 8 ch

Available i n t h e followin g leng t hs :

2m ( 6 .6 f t . ), 3 m(9 . 9 ft . ), 4m(13. 2 f t .) , 5m( 16.5 ft . ), 7m(23. 1 f t. ) .

Pinout Diagram

NOTE: this view is from the “INSIDE” of the Multi-pin
(D-Sub) connector. It depicts the view as seen from
the solder terminals. The MALE pins are on the
other side. This is essentially a “Mirror” view.

25

14

13

13 => n/a
25 => Ground
12 => Negative
24 => Positive
11 => Ground
23 => Negative
10 => Positive
22 => Ground
9 => Negative
21 => Positive
8 => Ground
20 => Negative
7 => Positive
19 => Ground
6 => Negative
18 => Positive
5 => Ground
17 => Negative
4 => Positive
16 => Ground
3 => Negative
15 => Positive
2 => Ground
14 => Negative

1

1 => Positive

Channel 1

Channel 2

Channel 3

Channel 4

Channel 5

Channel 6

Channel 7

Channel 8

TIP = POSITIVE
RING = NEGATIVE
SLEEVE = GROUND

Enlarged, Not To Scale.

DTP-800 SERIES

HOSA TECHNOLOGY , 6650 CABALLERO BLVD., BUENA PARK, CA 90620

PHONE: [phone] FAX: [phone]