Hosa DTF-804, DTF-805, DTF-807, DTF-803 User Manual
DTF-800 SERIES
Balanced Snake, XLR3F to DB25, 8 ch
Avail a ble in the f o ll o wi n g le ng t hs :
3m ( 9. 9 f t. ) , 4 m( 1 3. 2 f t. ) , 5 m( 1 6. 5 f t .) , 7 m( 2 3. 1 f t .) .
Pinout Diagram
NOTE: this view is from the “INSIDE” of the Multi-pin
(D-Sub) connector. It depicts the view as seen from
the solder terminals. The MALE pins are on the
other side. This is essentially a “Mirror” view.
25
14
13
13 => n/a
25 => Ground
12 => Negative
24 => Positive
11 => Ground
23 => Negative
10 => Positive
22 => Ground
9 => Negative
21 => Positive
8 => Ground
20 => Negative
7 => Positive
19 => Ground
6 => Negative
18 => Positive
5 => Ground
17 => Negative
4 => Positive
16 => Ground
3 => Negative
15 => Positive
2 => Ground
14 => Negative
1
1 => Positive
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Enlarged, Not To Scale.
XLR PIN 1 = Ground
XLR PIN 2 = Positive
XLR PIN 3 = Negative
25-pin male plug (also called a
“D-Sub”) wired-out to 8 XLR
Female connectors, for input
connections from eight
balanced sources to the D-88’s
multi-pin balanced inputs.
inputs on audio mixers.
DTF-800 SERIES
HOSA TECHNOLOGY , 6650 CABALLERO BLVD., BUENA PARK, CA 90620
PHONE: 714.522.8878 FAX: 714.522.4540
Loading...