Horizon QC-S300, QC-S30 User manual

Standard QC-S30 10 Bin

Friction Feed Collator

Instruction Manual

TABLE TOP COLLATOR

QC-S300/S30

Installation Manual

For UL

070406/QCS300QCS30UL/00E/IH

Kyoto,Japan

UM201105-00

C

RCOLLATOR

Table Top Collator

OLLATO

QC-S300/S30

Important Information

• This manual is designed to help you to install the QC-S300/QC-S30 Table Top Collator.
Please read and understand this manual, and keep it in a safe and convenient place.

• Do not operate the QC-S300/QC-S30 until you have read and understood the
instructions in this manual.

• Horizon International Inc. shall not be liable for incidental consequential damages
resulting from: improper or inadequate maintenance by the customer, unauthorized
modification or misuse, or operation outside of the environmental specifications for the
product.

• Horizon International Inc. pursues a policy of continuing improvement in design and
performance of the product. Therefore, the product design and specifications are
subject to change without prior notice and without our legal obligation.

• All rights are reserved. No part of this manual may be photocopied, reproduced or
translated into another language without the prior written consent of Horizon
International Inc.

I

Safety Precautions

Safety precautions are indicated in this manual as follows:

The term WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

The term CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in serious injury, or damage to the machine.

This symbol indicates a note which includes important information. Follow the
note to operate the machine safely.

This symbol indicates a prohibited action. Do not perform any prohibited action.

This symbol indicates an essential procedure. Follow the procedure to operate
the machine safely.

Important

Additional
Information

• This lists the range of acceptable values and operating
conditions.

• This explains a mechanism in the machine.

- Horizon International Inc. cannot anticipate every possible situation that might involve a
potential hazard. Therefore, the instructions in this manual and warning labels on the
machine are therefore not all inclusive.

- All equipment shall be locked out or tagged out to protect against accidental or inadvert­ent operation when such operation could cause injury to personnel. Do not attempt to
operate any switch, valve, or other energy isolating device where it is locked or tagged out.

- Do not operate the machine when any covers are removed.

- Some of the drawings in this manual show the machine uncovered to help in explaining
the details inside the machine.

II

Operating Safety Precautions

Warning for Installation

Do not give many loads on one electrical outlet. This can cause a fire or an electrical shock.

Cautions for Installation

Do not install QC-S300/QC-S30 in a location where it will be exposed to direct sunlight, high tem­perature or humidity.

Do not install the QC-S300/QC-S30 near any device which produces strong magnetic fields.

Do not install the QC-S300/QC-S30 in a location which is dusty. This can cause a fire or an
electrical shock.

Do not install the QC-S300/QC-S30 in an unstable floor surface. This may allow the QC-S300/
QC-S30 to fall over, and this can cause severe personal injury. This can also affect the perfor­mance of the machine.

III

This page is intentionally left blank.

IV