Horizon HDTM User Manual

Horizon Digital Terrestrial Meter

• Displays Signal Strength (R.F level) and Pre and Post BER
together

• Fast and accurate Pre BER in real time for easy pointing
of aerial via built in COFDM in real time. 4 quality star
indicates the quality of service

• Digital SNR displayed in dB

• 32 pre programmed transmitters (via website) or all
channel step through

• Audible tune-in, with back light

• 7 or 8 MHz channels

• 2K and 8 K mode

• Automatic constellation

• VHF (band3) and UHF bands

• RF input range 167-862 MHz

• Input dynamic range –72dBm~-20dBm

• Input connector BNC. Input imp 75 ohms. Loop through

• Built in universal charger 100-240 V Ac / 12 W.
Intelligent charger (CE approved) with delta V delta T
detection. Fast charge, then Trickle

• Run time with full charge: Minimum 5 hours from 2.4
Ah NiMH battery

• Figure of 8 mains input connector. 2.1 mm Female PSU
plug for external charge via supplied car charger

• Computer interface: Serial port (Com 1-4) for
upgradeable software on transmitters.

• Supplied with leather case, mains lead, programming
lead, car lead, IEC to BNC adapter and 2 off 10db
attenuators

For a reliable solution!

www.horizonhge.com

HDTM

Our HDTM Digital Terrestrial
Meter uses a similar platform
as the HDSM and shows
signal strength (R.F level) and
post BER. UHF and VHF, it
also has simply quality of
service indicators.

The meter comes pre
programmed with channels
21-69 and can hold an
additional 32 muxes allowing
for customising of the meter
depending on your logistical
position.

Horizon Global Electronics Ltd
Unit 1
8 Kinetic Crescent
The London & Office Science Park
Enfield EN3 7XH
Tel: [phone]
Fax: [phone]
E-Mail: [e-mail]