Hoover U8149-900, U8148-900, U8146-900, U8143-900, U8142-900 Owner’s Manual

...

WindTunnel TM

with V2 Technology TM

by HOOVER

Thank you for your purchase!

Owner's Manual

ENGLISH -_ pp.1-1 3 ESPANOL-_ pag, 14-21 FRAN(_AIS "_ p. 23-30

www.hoover.com

This product was designed for easy assembly (see page 3)

Review this manual before

operating cleaner

Thank you for choosing a HOOVER product.

Please enter the COMPLETE model and serial numbers in the spaces provided. The numbers are located on the back of your cleaner.

Model

Serial number Hint: Attach your sales receipt to this owner's manual,

Verification of date of purchase may be required for warranty service of your HOOVER product.

Important Safeguards

When using an electrical appliance, always follow

Contents

Assembling Cleaner .......................... 3-4

Carton Contents .................................... 3

Cleaner Descriptions ............................ 5

How To Use ........................................ 5-7

Cleaning Tools .................................. 7

Carpet Height Adjustment ................ 6

Brush Roll Switch ............................ 6

Circuit Breaker .................................. 6

If You Have a Problem ........................ 12

Clearing Blockages ........................ 13

Important Safeguards .......................... 2

Lubrication .......................................... 12

Maintenance

Authorized Service .......................... 13

Cleaning filter ................................ 8-9

Emptying Dirt Cup ............................ 8

Replacing Powered Hand Tool

Agitator Brush Roll ...................... 11

Replacing Power Hand Tool Belt ..11

Replacing Edge Groomers ............ 10

Replacing Headlight ........................ 10

Thermal Protector .............................. 12

Warranty .............................................. 13

_ 2002 The Hoover Company

www.hoover, com

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

War n i n g, To reduce the risk of fire, electric shock, or injury:

• Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any appliance is used by or near children. Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating agitators and other moving parts. Do not operate cleaner in bare feet or

when wearing open toe shoes or sandals.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• Do not use to pick up flammable or combustible materials such as gasoline or fine

wood sandings or use in areas where they may be present.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner.

• Always turn offthis appliance before connecting or disconnecting hose.

• Do not use without dirt cup or filters in place. Empty cup and clean filter frequently when picking up very fine materials such as powder.

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, or anything that may reduce air flow.

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never

handle plug or appliance with wet hands.

• The use of an extension cord is not recommended.

• Do not use with damaged cord or plug. If appliance is not working as it should, has

been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot).

• Use vacuum cleaner only for its intended use as described in the instructions.

Use only attachments recommended by The Hoover Company; others may cause hazards.

basic precautions, including the following:

Save these instructions!

If you need any assistance:

Visit our website at www.h00ver.c0m. Click on the "Service" button

to find the service outlet nearest you OR

Call 1-800-944-9200 for an automated referral of service outlet locations (U,S, only) OR

Call 1-330-499-9499 to speak with a representative in our Consumer

Response Center.

Please do not return this product to the store.

Carton contents

Accessories

ill

E H

Empty carton. Find the parts shown above before disposing of packing materials.

A. Handle section B. Cleaner body

C. Hose holder

Note: The white switch lock above the ON/OFF switch aids

in the assembly of your cleaner. Assembly can be continued if

the switch lock is missing. However, do not remove the switch

lock until assembly is completed.

The accessories are packed on the cleaner.

Not all accessories are included with every

model. D. Hose I. Extension wand

E. Dusting brush J. Crevice wand F. Furniture nozzle

G. Crevice tool H. Powered hand tool

Continued dl 3

Cleaner Assembly

1151

Remove cardboard (A) and four screws from handle section. Discard

cardboard, but keep screws for

Snap tabs on hose holder (B) into

holes on handle section.

Inn

Push switch down to OFF position.

assembly (Figs, 1-7 and 1-8),

m iiii

Slide handle section onto back of handle.

Pu, switch lock (C) above ON/OFF

switch (D) straight out. Dispose of switch lock.

If switch lock has come off during

assembly, make sure switch is in

OFF position (down) before plug-

ging into electrical outlet.

Push screws into holes on back of

handle (Fig. 1-7) and hose holder

(Fig. 1-8),

Tighten screws securely with a

Phillips screwdriver.

Place hose on holder.

Cleaner description

The assembled cleaner will look like the drawing.

1. Handle

2. ON/OFF switch

3. Tool cover

4. Dusting brush

5. Powered hand tool

6. Furniture nozzle

7. Brush roll ON/OFF switch

8. Dirt cup

9. Dirt cup handle

10. HEPA cartridge filter

11. Pre-filter

12. Final filter

13. Three position handle

release pedal: step on

lever to lower handle to

operating or low positions.

14. Nozzle control knob:

slide knob to correct set-

ting For height of carpet

being Gleaned.

15. Furniture guard

16. Headlight

17. Edge groomers

18. Hose

19. Hose holder

20. Cord hooks: wrap

cord around hooks for

storage. The top hook

rotates right or left for easy cord release.

21. Carrying handle

22. Extension wand

23. Crevice wand: stores

in wand.

Operate cleaner only at voltage specified on data

plate on bottom of

cleaner. This cleaner is intended for household use.

Polarized plug

To reduce the risk of electric shock, this appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

lithe plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician to install the

proper outlet. Do not change the plug in any way.

Transporting cleaner

Put handle in upright position. Tilt clean-

er back on rear wheels. Push forward.

ON-OFF switch

Plug cord into electrical outlet. T() turn cleaner ON, push switch up. T() turn cleaner OFF, push switch down.

Carrying cleaner

Use the carrying handle to lift the

cleaner.

Do not lift cleaner using dirt cup han-

dle (A).

Handle positions

The handle of your cleaner has three

positions; upright for storage and when using cleaning tools; operating posi-

tion for general operation on carpet

and floors; lOW for reaching under low furniture. Step on handle release lever

to lower handle.

Continued -I) 5

+ 11 hidden pages