H
0
0
V
E
R
Fill in and retain !
The HOOVER vacuum cleaner you have just purchased is a combination
cleaner equipped with a two speed motor. One speed is utilized when the
cleaner is being used on carpet and rugs, and a second higher speed is for
use with attachments.
Your cleaner is a model ................................ *.........*...................
and has a serial number ..............................................................
For your personal records, please enter the model number and serial number
in the spaces provided above and retain in a safe place.
The model number and serial number are on the bottom of the cleaner.
Save!
INDEX
Cleaner Description ..................................................... 3
Energy Saving Tips ...................................................... 2
How to Unpack and Assemble Cleaner ...................... 3-6
How to Use on Carpet and Floors ............................. 6-8
How to Use Cleaning Tools ..................................... 9-13
Important Safeguards .................................................. 2
Lubrication ................................................................. 18
Maintenance of 'Convertible' Cleaner
Authorized Hoover Service .................................... 18
How to Replace Belt ......................................... 15,16
How to Replace Brushes ................................... 16,17
How to Replace Headlight ..................................... 14
Replacing the Bag ........................................... 5,6,14
Second Speed ............................................................. 12
User Check List .......................................................... 18
© The HoOver Company 1972
Important safeguards !
• Read all instructions.
• Warning: Electric shock could occur if used outdoors or on wet surfaces.
• Close supervision is necessary when any appliance is used by or near chil-
dren. Do not allow vacuum cleaner to be used as a toy or to run unattend-
ed at any time.
• Keep hands, feet, loose clothing, and hair away from rotating agitator.
• Don't run cleaner over cord. It may damage insulation.
• Do not use cleaner to pick up matches, or live ashes and cigarette butts.
• Avoid picking up hard, sharp objects with the cleaner. They may damage
the cleaner and the bag.
• Unplug cleaner when not in use. Turn machine off at switch before un-
plugging.
• Always disconnect cord from electrical outlet before servicing the cleaner.
• Change bag frequently when picking up very fine materials such as powder.
• Grasp the plug to disconnect from wall outlet to avoid damage to cord,
plug, prongs, or receptacle.
• The use of an extension cord is not recommended.
If cleaner is in disrepair, do not attempt to operate.
Have repairs made by the qualified personnel at Hoover Factory Service
Centers or Authorized Hoover Warranty Service Dealers.
• Use vacuum cleaner only for its intended use as described in the instruc-
tions. The use of attachments not recommended by the appliance manu-
facturer may cause hazards.
Save these instructions w
ENERGY SAVING TIPS
1. Replace throw away cleaner bag promptly, before overfilled. Use a genuine
HOOVER bag made for your model cleaner.
2. To maintain effective cleaning, replace agitator brushes and belt when
necessary.
3. Turn off cleaner when not in use, such as when moving furniture.
4. Keep your cleaner operating at peak performance level - have inspection
and service performed by a Hoover Factory Service Center or Authorized
Hoover Service Dealer.
UNPACKING THE CLEANER
Unpack the cleaner from the carton
and identify the parts shown in Fig. 1.
Remove and dispose of the cardboard
packing.
1. Upper handle section
2. Lower handle section
3. Cleaner base
4. Outer bag assembly
5. Disposable bag
1 2 3
The cleaner assembled will look
like the drawing below.
HANDLE
CORD STORAGE HOOKS
wrap cord around cord
hooks for storage.
ADJUSTMENT LEVER
FOR CARPET PILE
HEIGHT to adjust the
undersideof the cleaner
(nozzle location) to the
carpet pile height.
\
\ \
FIG. 1
ON-OFF SWITCH to turn
on, slide switch downward;
to turn cleaner off, slide
the switch upward.
SPRING HOOK place
spring ring over hook to
suppo_ the bag.
BAG JACKET outer
covering for throw away
bag.
HANDLE BAIL support
for handle.
\
PILE HEIGHT
ADJUSTMENT DISPLAY
indicates the four positions
set by the Adjustment \
Lever for cleaningvarious
carpet piles. Four positions
are: LOW, NORMAL, HIGH,
and SHAG.
HOOD
HEADLIGHT
(some models)
\
CARRYING HANDLE
located underneath handle
bail.
HANDLE RELEASE
LEVER step on lever to
lower handle to operatint_
.and low position.
FURNITURE GUARD
prevents c_eanerfrom
rubbing against furniture.
3 After identifying each part, you are ready to begin assembling.
HOW TO ASSEMBLE
A. Put handle together
Slide the two handle pieces together.
Check to see that cord storage hooks
are on the same side of handle. Insert
bolt through small holes and secure
with nut. Tighten nut with screw-
driver. Fig. 1.
If the nut and bolt are not assembled
as shown in the illustration, the holes
in the handle are not lined up correctly.
Fig. 2.
2
B. Attach handle to the cleaner
Unscrew nut and remove bolt from
handle socket. Fig. 3.
3
Connect electric plug on handle bail
with the socket on the handle. Make
sure plug assembly is positioned as
shown in illustration. Fig. 4.
Push handle down into place in bail.
The excess wire and electric connec-
tion is guided into the handle. Push
4
5
down until handle is securely in
place. Fig. 5.
Insert second bolt through small
holes of handle and secure with nut.
Fig. 6. Tighten nut with screwdriver.
6 4
C. Attaching outer bag to cleaner
The outer bag is connected at the rear
of the cleaner. There are two projec-
tions at the bottom of the outer bag
assembly.
To attach outer bag to the cleaner,
place the two projections at the bot-
tom of the outer bag assembly inside
the metal grooved plate. (You will
find the grooved plate extending out
from the bottom rear of the cleaner.)
Fig. 1.
Just above the opening at the rear of
the cleaner is the bag clip. Pull the
bag clip to the left and fit bag against
opening. When you release the bag
clip, it should move to the right and
fit completely over the bag lock.
Fig. 2.
Attach the bag to the bag spring hook,
which is located on the top section
of the handle. Fig. 3.
D. Attach throw away bag
to cleaner
To attach throw away bag to cleaner,
unzip outer bag. Pull out tube.
Insert curved collar of bag into holder.
Slide collar of bag into slots of holder
until it fits securely.