Hoover Inc.
™
New Equipment Warranty
Limited Warranty
Hoover Inc. warrants new equipment against defects in material and workmanship under
normal use and service to the original purchaser. Any statutory implied warranties,
including any warranty of merchantability or tness for a particular purpose, are
expressly limited to the duration of this written warranty. Hoover Inc. will not be liable
for any other damages, including but not limited to indirect or special consequential
damages arising out of or in connection with the furnishing, performance, use or inability
to use the machine. This remedy shall be the exclusive remedy of the purchaser. The
warranty period is subject to the conditions stated below.
1 Year - Chassis, Motor, Fan and Electrical Components
Hoover, Inc, warrants the plastic chassis to be free of defects in materials and
workmanship for one (1) year. Hoover Inc. warrants the ½ HP electric motor to be free of
defects in materials and workmanship for one (1) year, under normal use and service sold
to the original purchaser. Parts replaced or repaired under this warranty are warranted
for the remainder of the original warranty period. Service labor charges are covered for
one (1) year from the date of purchase, when performed by a Hoover-authorized service
provider. Freight charges to and from this service provider will be covered for 90 days
from the purchase date. After this 90 day period, these freight charges will be paid by the
equipment owner. Travel expenses are not covered.
Normal wear items such as capacitors, cords, nishes or switches will not be warranted
for manufacturing defects for 90 days from the purchase date.
All warranties of motors and associated components will be voided; if the Air Mover is
serviced by anyone other than a Hoover-authorized service provider; if the machine is
mechanically modied; or if the machine is misused or abused.
The warranty starts on the purchase date by the original purchaser from an authorised
Hoover Inc. distributor, subject to proof of purchase. The machine registration card must
be completed and returned immediately at the time of purchase. If proof of purchase
cannot be identied, the warranty start date is 90 days after the date of sale to an
authorized Hoover, Inc. distributor.
Hoover, Inc.
7005 Cochran Road
Glenwillow, Ohio 44139
(888) 321-1 134
For Service, Ask for Tech. Service Dept, ext. 2554
www.hoover.com
© 2010 Copy Rights Reserved Hoover, Inc.
Design and Engineering
The • ½ HP, 2200 CFM motor gives
ample power for drying surfaces and
moving musty air.
9.5” wide, steel fan blade and frame. •
14” chassis opening.
The durable, roto-molded chassis is •
easy to keep clean.
Designed to operate at •
three angles. Aim the air
streamattheoortomove
air and dry carpets, or tip
back to dry curtains, walls
and ceilings.
Stack up to 3 air mover units for easier storage.•
A balanced design with molded carrying handle makes transportation easy.•
20 foot long power cord.•
Airintakeandoutletscreenskeepairowfreeofdebrisandprotectngersfrom•
the powerful, steel fan blades.
Lifetime warranty on roto-molded chassis. 1 year on electrical components.•
Motor
Fan Size 9.5” Steel Blade and Frame
Air Flow Rate up to 2200 CFM
Chassis Molded High-Density Polypropylene
Power Cord 20 Foot Power Cord
Dimensions 19.5” H x 19.2” L x 14.5” W
Shipping Weight 33 lbs.
Warranty Lifetime on Body. 1 Y ear on Electrical
Components
© 2010 Copy Rights Reserved Hoover, Inc.
½ HP, 2200 CFM Air Mover
Powerful High Airow
Dries Hard Floors, Carpets,
Walls and Ceilings!
Specications
1
/2 HP, 1 15 V
#961130010- 9/10- Rev1
1.0 Safe Operating Conditions
READ THIS MANUAL BEFORE USING AIR MOVER. KNOW THE PROPER
OPERATION, CORRECT APPLICATIONS AND THE LIMITATIONS OF THIS
EQUIPMENT BEFORE USE.
Reduce the Risk of Fire, Electric Shock or
Injury:
This Air Mover must be grounded. See section 1.2 for •
more details.
This Air Mover is designed for commercial use. It is •
constructed for indoor use and its not intended for any
other use.
Do not use in ammable or explosive areas. Never •
operate this Air Mover near ammable or explosive
dusts, liquids or vapors.
Do not use with damaged cord or plug.•
Do not use outdoors. Do not expose to rain. Do not use •
in standing water.
Do not use Air Mover if it not operating properly. Report •
problems to a supervisor.
Do not use with an extension cord.•
Wipe the chassis of the Air Mover to clean. Use vacuum •
to remove dusts from screen. Do not wash with owing
water.
Do not use this Air Mover unless trained.•
Figure 1
Figure 2
Reduce the Risk of Fire, Electric Shock or
Injury:
Do not run any machines over the cord.•
Do not pull Air Mover by cord or plug.•
Do not pull cord around sharp edges or corners.•
Do not unplug by pulling on the cord.•
Do not stretch cord.•
Do not handle plug with wet hands.•
Keep cords away from hot surfaces.•
Do not allow Air Mover intake to collect burning or •
smoking debris, such as cigarettes, matches or hot ashes.
Do not move air with ammable or explosive chemicals.
Keep the air intake free of debris. Do not operate with •
the intake covered or blocked.
(2) Air Mover Air Mover (7)
2.0 Operating Tips
Dry Floors and
Carpets
Move Musty Air
Dry Walls and Curtains
Dry
Ceilings
For indoor use only.•
Adjust the Air Mover to the desired position •
for operation by tipping the machine onto one
of the three at faces of the heavy duty plastic
chassis. The balanced machine design assures
stable positioning.
Plug the power cord into a grounded outlet. •
This Air Mover has three (3) power settings •
controlled at the side of the machine. Turn the
power knob on the side of the Air Mover to
the desired speed.
1 = 780 RPM. 2 = 1000 RPM. 3 = 1100 RPM. •
To turn the Air Mover off, turn the power
knob to the off position.
Never pull on the cord to disconnect or turn •
off the motor.
3.0 Storing the Air Mover
Wind the cord around the carrying handle.•
Store in the upright position in a dry area.•
Check and clean after each operation. Remove soil and chemical buildup. Use •
vacuum and soft brush to remove soils from motor vents and fan blades.
Wipe the outside chassis with a mild cleaner. Never wash the outside of the Air •
Mover with owing water. Make sure that the air intakes are not blocked.
Check switches for proper operation. Call a trained electrician to repair or replace •
damaged cords and plugs.
Report problems and repair promptly.•
4.0 Troubleshooting
Never operate this Air Mover when the equipment is not performing as expected or when
any part is visibly damaged. When repair is needed, take the equipment to an authorized
service center.
4.1 Air Mover will not run
Circuit breaker tripped in building. • Check and reset.
Equipment unplugged. • Check plug at wall and plug in.
Power cord failure. • Seek authorized repair services.
Motor sparks or smokes.• Seek authorized repair services.
4.2 High Vibration
Air Mover fan blades are damaged or broken. • Seek authorized repair services.
Motor bearings are worn. • Unplug the Air Mover and spin the fan blades. If the
spinning causes noise or restricted movement, replace the Air Mover with new
equipment.
(6) Air Mover
1.1 Air Mover will not run
This Air Mover operates on a 15 amp nominal 115V, 60 Hz, A.C. power circuit. The,
amp, hertz and voltage ratings are listed on the motor spec label found on each Air
Mover. Using voltages above or below those indicated on the spec label will damage the
motor. Always check your local voltage requirements.
1.2 Grounding Instruction
This Air Mover must be grounded while in
use to protect the operator from electric shock.
This machine is built with a 3-wire cord and a
3-pronggrounding-typeplug(Figure1)tota
properly grounded receptacle.
Before using this machine, make sure a properly
grounded, 3-hole electrical outlet is available.
If not available, as in some older facilities, use
Figure 1
an adapter for connecting a 3-prong plug to
a 2-prong receptacle (Figure 2) to ground the
outlet chassis.
IMPORTANT!! This adaptor may not be
used in Canada.
IMPORTANT!! Never cut off the grounding
prong for use in a 2-prong outlet. By doing
so, you have cut off your protection from
electrical shock.
Never assume that all 3-hole outlets are properly
Figure 2
grounded. Check before use.
Never assume that an adaptor connection (as in
Figure 2) is properly grounded. Check the outlet
with a ground fault interrupter device which
quickly indicated if a ground is connected.
Correct a faulty grounding before proceeding.
1.3 Extension Cords are Not Recommended
The Air Mover is built with a 25 foot safety cord. Use of any extension cords is NEVER
RECOMMENDED.
Air Mover (3)
½ HP, 2200 CFM Air Mover
™
Fan Wheel (1)1.
Motor 2. ½ HP (1)
Motor Bolts (4)3.
Rotary Switch (1)4.
Switch Housing (1)5.
Motor Screen (1)6.
Finger Guard (1)7.
Power Cable w/ plug - 20 ft. (1)8.
Intake Screen (1)9.
Venturi Ring (1)10.
Venturi Rivents (8)11.
(4) Air Mover
Air Mover (5)
Loading...