Hoover S2220, DOKITCHAPP2548527, Flair Owner's Manual

Owner’s Manual

English ➜ pp. 1-7

Español ➜ pàg. 8-11

Français ➜ p. 12-15

Review this manual before

operating cleaner.

This cleaner inspected and packaged carefully before being shipped
from the factory. If you should happen to need assistance during assem­bly or operation,

Visit us online at www.hoover.com to find the service outlet

nearest you (click on the “Service” button or

Call 1-800-944-9200 for an automated referral of authorized

service outlet locations (U.S. only) or
Call 1-330-499-9499 to speak with a representative in our

Consumer Response Center.

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

Thank you for selecting a HOOVER product.

Flair™ Cleaner
with Powered Nozzle

2

Fill in and retain

The model and serial number are located in the middle of the back of the
cleaner body.

For your personal records, please enter the COMPLETE model and serial
number in the spaces provided and retain this information.

Your cleaner is model___________________________________

and has serial number___________________________________
It is suggested that you attach your sales receipt to this owner’s manual.

Verification of date of purchase may be required for warranty service of
your Hoover product.

Index

Assembling Cleaner.......................3

Cleaner Descriptions .................3

How To Use.....................................4

ON-OFF Switch.....................................4

Storage........................................4

If You Have a Problem ...................6

Service.........................................6

Important Safeguards....................2

Maintenance ................................4-5

Dirt Cup....................................4-5

Lubrication ..................................5

Powered Nozzle..........................5

Final Filter...................................5

Warranty ..........................................6

© 2003 The Hoover Company

www.hoover.com

Important Safeguards!

When using an electrical appliance, always follow basic precautions,
including the following:

READ ALL

INSTRUCTIONS BEFORE USING THIS APPLIANCE

Warning: To reduce the risk of fire, electric shock, or injury:

• Do not use outdoors or on wet surfaces.

• Close supervision is necessary when any appliance is used by or near children.

• Do not allow vacuum cleaner to be used as a toy or to run unattended at any
time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,
rotating agitator and other moving parts.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches,
or hot ashes.

• Do not use to pick up flammable or combustible materials such as gasoline or
fine wood sandings or use in areas where they may be present.

• Avoid picking up hard, sharp objects with the cleaner. They may damage the
cleaner and the filter.

• Do not use without dirt cup or filters in place. When picking up very fine
materials such as powder, empty dirt cup often.

• Use extra care when cleaning on stairs.

• Do not put any object into openings. Do not use with any opening blocked; keep
free of dust, lint, hair, or anything that may reduce air flow.

• Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord
around sharp edges or corners. Do not run appliance over cord. Keep cord away
from heated surfaces.

• Always disconnect cord from electrical outlet before servicing the cleaner.

• Unplug cleaner when not in use. Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never
handle plug or appliance with wet hands.

• The use of an extension cord is not recommended.

• Do not use with damaged cord or plug. If appliance is not working as it should,
has been dropped, damaged, left outdoors, or dropped into water, take it to a
Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer
(Depot).

• Use vacuum cleaner only for its intended use as described in the instructions.

Save these instructions!

Remove the toggle bolt (A) from the han­dle section (B) by turning in a counter­clockwise direction.

3

1. Assembling cleaner

1-1

1-2

1-4

1-3

Questions or Concerns?

The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its
use. Look on the list provided with the product for your local Hoover Factory Service Center or in the Yel­low Pages under “Vacuum Cleaners - Household” for the nearest Authorized Hoover Warranty Service

Dealer (Depot) or call:

1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR

1-330-499-9499 to speak with a representative in the Hoover Consumer Response Center OR
Visit us online at www.hoover.com to find the service outlet nearest you (click on the
“Service” button)

Unpack cleaner from carton, remove all
cardboard and identify parts shown.

1. Handle Section (with toggle bolt)

2. Cleaner body and Powered nozzle

A

G

B

A

B

C

E

F

D

2

The assembled cleaner will look like
the drawing.

A. Cord hook (hook swivels for

quick cord release)
B. ON-OFF switch
C. Dirt cup
D. Removable final filter grill
E. Cleaner body

F. Powered nozzle
G. Dirt cup latch

This cleaner is intended for household
use.

Attach handle

Carton contents

Cleaner description

Push handle section (B) onto cleaner
body (C), with holes (D) aligned.

Insert toggle bolt through both holes and
tighten by turning clockwise.

Continued

B

C

D

1

Toggle
bolt

ON-OFF switch

The ON-OFF switch (A) is located on the
cleaner body. Turn the cleaner ON by

pressing the switch to ❙ for BARE FLOOR
or to ❙❙ for CARPET. Turn the cleaner OFF
by pressing the switch to O.

3-4

Pull filter (C) inside out through filter
frame.

C

4

2-1

2-3

2-2

3-1

3-2

3-3

A

B

C

D

2. How to use

Cleaning under low
furniture

Your cleaner has been designed to do an
effective job cleaning under low furniture
and in hard to reach areas. Lower handle
to floor level and proceed with back and
forth motion.

Storing cleaner

When cleaner is not in use, wrap cord
around cord hooks as shown. Upper hook
rotates for quick release.

For your convenience, cleaner may be
hung on a hook from opening at top of
handle. Cleaner can also stand in the
upright position.

Familiarize yourself with these home main­tenance tasks as proper use and care of
your cleaner will ensure continued clean­ing effectiveness.

Dirt cup

The dirt and debris picked up by the

cleaner is deposited into the dirt cup. It

is recommended that the dirt cup be
emptied after each use.

Very fine materials, such as face pow­der, cornstarch and fireplace ashes,
picked up in large quantities can cause
a loss of suction. When using the
cleaner for this type of dust, empty cup
often.

When empty, the cup can be cleaned with
a damp cloth or rinsed with water. Be
sure cup is dry before reusing.

How to empty dirt cup

Disconnect cleaner from electrical
outlet.

Press dirt cup latch (A) down and pull
cup (B) out.

Hold cup over trash can.
Remove filter (C) from top of cup.

Empty cup, making sure to hold cup with
dirt port (D) facing up.

Shake dust from filter.

Operate cleaner only at voltage speci­fied on data plate located on back of
cleaner motor housing.

Polarized plug

To reduce the risk of electric shock, this
product has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. If the
plug does not fit in the outlet, reverse the
plug. If it still does not fit, contact a quali­fied electrician to install the proper outlet.
Do not change the plug in any way.

Plug cord into electrical outlet. Your
cleaner is now ready to operate.

3. Maintenance

A

3-9

3-10

3-5

Brush the surface of filter to remove any
clinging litter. (Filter may be washed in
warm water. It must be completely dry
before replacing in cleaner. Do not use

cleaner without filter in place.)

3-6

Push filter back through frame.

Place filter on top of cup as shown and
push firmly into cup.

Final filter

How to replace

The final filter assists in returning clean air
to the room. The filter is located on the
side of the cleaner body.

When it becomes dirty, it must be
replaced. Replace with part no.
59136-022.

Disconnect cleaner from electrical out­let.

To replace, press down on grill tab (F)
and remove grill. Remove the felt filter (G)
and replace with a new one.

Powered nozzle

How to clean

Disconnect cleaner from electrical out­let.

To maintain cleaning effectiveness, peri­odically remove lint, strings, etc. from the
brush roll from the bottom of the nozzle.

3-7

Place bottom of cup (E) first, then pivot
cup into position. Press top of cup to
snap it into place.

NOTE: Filter must be in place for cup
to latch.

5

Continued

To replace the filter grill, insert tabs (H) at
the bottom of the grill into slots (I) in the
cleaner body. Press on grill to snap it into
position.

E

I

H

F

3-8

G

3-11

Belt

The long-lasting belt may never need to
be replaced. However, if the belt should
break, it can be replaced by contacting
your local Authorized Hoover Dealer
(Depot) or Hoover Factory Service Center.

Lubrication

The motor is equipped with two bearings.
These bearings contain sufficient lubrica­tion for the life of the motor. Therefore, do

not add lubricant to either motor bear­ing.

When to replace

Replace the brush roll when the brushes
do not touch the edge of a card as it is
moved across the opening on the bottom
of the nozzle.

A new brush roll can be installed by your
local authorized Hoover Dealer (Depot) or
Hoover Factory Service Center.

6

Service

To obtain approved HOOVER service and

genuine HOOVER parts, locate the near­est Hoover Factory Service Center or

Authorized Hoover Warranty Service
Dealer (Depot) by:

• checking the Yellow Pages

under “Vacuum Cleaners ­Household” OR -

• checking the list of Factory
Service Centers provided
with this cleaner OR -

• checking the Service section of The
Hoover Company on-line at
www.hoover.com OR -

• calling 1-800-944-9200 for an
automated referral of
authorized service outlet
locations (U.S. only).

Do not send your cleaner to The Hoover
Company in North Canton for service, this
will only result in delay.

If further assistance is needed, contact
The Hoover Company Consumer
Response Center, North Canton, Ohio
44720 Phone: [phone].

In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8,
Phone: [phone].

Always identify your cleaner by the com-
plete model number when requesting
information or ordering parts. (The model
number appears in the middle of the back
of the cleaner body.)

• Dirt cup full.

• Empty dirt cup.

• Filter clogged.

• Empty dirt cup and clean filter.

• Nozzle clogged.

• Remove obstruction.

Problem: Cleaner is difficult to push

on carpet

Possible cause

Possible solution

• Floor surface set to “BARE FLOOR”.

• Turn powered nozzle on by pressing
switch to ❙❙ for CARPET.

Full One Year

Warranty

(Domestic Use)

Your HOOVER® appliance is warranted in
normal household use, in accordance with
the Owner’s Manual against original
defects in material and workmanship for a
period of one full year from date of pur­chase. This warranty provides, at no cost
to you, all labor and parts to place this
appliance in correct operating condition
during the warranted period. This warran­ty applies when the appliance is pur­chased in the United States including its
territories and possessions, or in Canada
or from a U. S. Military Exchange. Appli­ances purchased elsewhere are covered
by a limited one year warranty which cov­ers the cost of parts only. This warranty
does not apply if the appliance is used in
a commercial or rental application.

Warranty service can only be obtained by
presenting the appliance to one of the fol­lowing authorized warranty service out­lets. Proof of purchase will be required
before service is rendered.

1. Hoover Factory Service Centers.

2. Hoover Authorized Warranty Service
Dealers (Depots).

For an automated referral of authorized
service outlets in the U.S.A.,
phone [phone] OR

Visit The Hoover Company on-line at
www.hoover.com

This warranty does not cover pick up,
delivery, or house calls; however, if you
mail your appliance to a Hoover Factory
Service Center for warranty service, trans­portation will be paid one way.

While this warranty gives you specific
legal rights, you may also have other
rights which vary from state to state.

If further assistance is needed, or if there
are questions concerning this warranty or
the availability of warranty service outlets,
write or phone the Consumer Response
Center, The Hoover Company, 101 East
Maple St., North Canton, Ohio 44720.
Phone [phone].

In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8,
1-800-263-6376.

4. If you have a
problem

If a minor problem occurs, it usually can
be solved quite easily when the cause is
found by using the check list below.

Problem: Cleaner won’t run

Possible cause

Possible solution

• Not firmly plugged in.

•

Plug unit in firmly.

• No voltage in wall receptacle.

•

Check fuse or breaker.

• Blown fuse/tripped breaker.

•

Replace fuse/reset breaker.

Problem: Cleaner suction low

Possible cause

Possible solution

7