OperatingandServicingInstructions __J
Espa_o - p_g na E1 ®
www.hoover.com
CarpetCleaner
IMPORTANT:READCAREFULLYBEFOREASSEMBLYAND USE.
Questions or concerns? For assistance, please call Customer Service at
1-800-944-9200 Mon-Fri 8am-7pm EST before returning this product to the store.
THIS PRODUCTIS INTENDEDFORHOUSEHOLDUSEONLY.
IF USEDCOMMERCIALLYWARRANTYIS VOID.
@2010 Techtronic Floor Care Technology Limited. All rights reserved. #960009622 ID100485-R1
Thankyou for choosingaHOOVER° product.
Please enter the complete model and Manufacturing
Code in the spaces provided.
MODEL
MFG. CODE
Hint: Attach your sales receipt to this owner's manual,
Verification of date of purchase may be required for
warranty service of your HOOVER ®product.
Be sure to register your product online at Hoover.com or
call 1-800-236-6375 to register by phone.
Important Safeguards .............................................................................................. 3
Assembling Cleaner ................................................................................................. 5
Carton contents ................................................................................................... 5
How To Use ............................................................................................................... 7
Cleaner Description ............................................................................................. 7
Preparing the Carpet ........................................................................................... 8
Remove and Replace Clean Water Solution Tank .............................................. 8
Carpet Cleaning .................................................................................................. 9
Above Floor Cleaning/Attachments ..................................................................... 9
Dirty Water Tank.................................................................................................. 10
Maintenance .............................................................................................................. 11
Belt or Brushroll ................................................................................................... 12
Troubleshooting ....................................................................................................... 13
Service ....................................................................................................................... 14
Cleaning Products .................................................................................................... 15
Warranty .................................................................................................................... 16
TechtronicFloorCare TechnologyLimited
VACUUMCLEANER!ASPIRATEUR/ASPIRADORA
MOUEL/MODi=LE/MODELOXXXXXXX
MFG.CODE X_XX cOus
120v, 6OHz,_JP,O A us_e
SERIES/SERIE/SE_JEXXXXX z63G
HOUSEHOLDTY_fTYPEMENAGER/TIPODOMESTICO
Oistributed by HO|VER,inc. GlenwlUowOH44139
Madein Mexico/tbriqu_ au Mexique/Hechoen Mexic0 ;
X X
MANUFACTURINGCODE
Label located under cleaner)
If you need assistance:
Visit our website at hoover.com. Follow the authorized dealer Iocator link to find the Hoover _ authorized
dealer nearest you or call 1-800-944-9200 for an automated referral of Hoover_ authorized dealer
locations (U.S. only) or to speak with a customer service representative; Mon- Fri 8am- 7pm EST.
Please do not return this product to the store.
2
IMPORTANTSAFETYINSTRUCTIONS
SAVETHESEINSTRUCTIONS
When using an electrical appliance, basic precautionsshould always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING:TOREDUCETHERISKOFFIRE,
ELECTRICSHOCKORINJURY:
• Connectto a properly groundedoutlet only. SeeGroundingInstructions.
• Do not leaveappliancewhen plugged in. Unplugfrom outlet when not in use and
beforeservicing.
• Do notuseoutdoors.
• Do not immerse. To reducethe risk of electric shock - use indoors only, and use
onlyon carpet moistenedby cleaningprocess.
• Donotallowto be usedasa toy. Closeattentionis necessarywhen usedbyor near
children.
• Use only as described in this manual. Use only manufacturer's recommended
attachments.
• Donotusewith damagedcord orplug. Ifapplianceis not working as itshould,has
beendropped,damaged,leftoutdoors,or dropped into water, return it to a service
center for inspection.Call1-800-263-6376 for the nearestservicecenter.
• Donotpull or carry bycord,usecord as a handle,closea dooroncord,or pull cord
around sharp edges or corners. Do not run appliance over cord. Keepcord away
from heatedsurfaces.
• Do notunplug by pullingoncord. To unplug,graspthe plug, not the cord.
• Do nothandle plugor appliancewith wet hands.
• Donotputanyobject intoopenings.Donot usewith anyopeningblocked;keepfree
of dust, lint, hair and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and
moving parts.
• Do notpickup anythingthat is burningor smoking,suchascigarettes, matches,or
hot ashes.
• Do not usewithout dirty water reservoir in place.
• Turnoff all controls beforeunplugging.
• Donot leavecarpet cleaner unattendedwhen pluggedin.
• Occasionallyremove brushand clean debrisfrom endcapsto keep brush rotating
smoothly.
• WARNING:Fullyassemblecarpetcleanerbeforeoperating.
• WARNING:This product contains chemicals known to the State of Californiato
causecancer, birth defectsor reproductiveharm.
• Useextracarewhen cleaning on stairs.
• Donotuseto pick up flammable or combustibleliquids,such as gasoline,or use in
areaswhere they may be present.
• Keepthe carpet cleaner on thefloor. Useonlythe abovefloor attachment provided
for upholsteryandstair cleaning. 3
° Donotuseanextensioncordwiththiscarpetcleaner.
. Storethecarpetcleanerindoors.Putthecarpetcleanerawayafteruseto prevent
trippingaccidents.
° Usingimpropervoltagemayresultindamagetothemotorandpossibleinjurytothe
user.Propervoltageislistedonthecleanerplate.
° UseonlyHoover®Carpet& UpholsteryDetergent.Usingothercleaningsolutionsmay
causeexcessivefoaming.Excessivefoamwill causethefloatto shutoffthe cleaner
prematurely.Usingothercleanerscanvoidyourwarranty.
GROUNDINGINSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown,grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This appliance is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be inserted into an appropriate
outlet that is properly installed and grounded in accordancewith all local codes and
ordinances.
GROUNDED
WARNING:Improperconnection
oftheequipment-groundingconductorcan
resultinariskofelectricshock.Checkwith
a qualifiedelectricianor servicepersonif
youarein doubtastowhethertheoutletis
properlygrounded.Donot modifytheplug
providedwiththeappliance--ifitwill notfit
theoutlet,havea properoutletinstalledby
a qualifiedelectrician.
Thisapplianceis for useon a nominal120-voltcircuit andhasagroundingattachment
plug that looks like the plug illustrated in the sketch above. Make sure that the
appliance is connected to an outlet having the same configuration as the plug. No
adaptorshouldbeusedwith this appliance.
GROUNDINGPIN I
GROUNDED
OUTLETBOX
CARTONCONTENTS
A. Upper Handle
B. Midsection
C. Base
D. Upholstery/Stair Hose Adapter
E. Tool Caddy
F. Upholstery/Stair Hose
G. Upholstery/Stair Attachment
H. (1) Upper Handle screw
I. (2) Right and Left Base Screws
J. (1) Middle Base Screw
K. (3) Nuts
Remove all parts from carton and identify each
item shown.
Make sure all parts are located before disposing of
packing materials.
NOTE: Phillips screwdriver needed for assembly
A
B
C
BODYAND HANDLEASSEMBLY
1.2 Stand base in upright position. Push midsection
onto base by aligning tabs on the backside of
midsection and the pockets on the backside of
base. Assemble the two (2) lower handle screws
in the following manner: while holding nut in place,
insert screw through front of midsection and tighten.
• IMPORTANT•
Make sure the power cord is out of the way to
avoid pinching.
1,3 Slide upper handle down onto unit, Place screw
into recess in back of upper handle and tighten.
_li__ I
©©©
K
TOOLCADDYASSEMBLY
1.4Align tabs on tool caddy with slots on midsection
and snap into place.
1.5 Place nut into recess on tool caddy and hold
into place (Diagram A). Press handle release with
your other hand to tilt the midsection backwards
(Diagram B).
1.6 Place screw through center of lower midsection
and tighten.
1.7 Wrap the cord around the upper and lower
cord clips.
B
1.8 Slide the Upholstery/Stair Attachment into the
middle slot of the lower tool caddy.
1.9 Clip the adapter end of the hose into the slot on
the lower tool caddy.
1.10 Run the hose to the upper caddy and press
into hose clip #1 (See Fig. 1.7).
1.11 Continue wrapping the hose clockwise around
the tool caddies, pressing the hose into the groove
on the bottom of the lower tool caddy.
1.12 Run the hose back to the upper caddy and
press into hose clip #2 (See Fig. 1.7).
1.13 Lock the attachment end of the hose into place
by pressing down onto the post located on the right
side of the lower tool caddy, until secure in place.
/
ATTACHINGCLEANWATER
SOLUTIONTANK
Place Clean Water Solution Tank into cleaner and
tilt back until it snaps into place.
CLEANERDESCRIPTION
1. Non-Slip Grip TMHandle
2. Clean Clean Water Solution
Tank Latch
3. Carry Handle
4. Clean Water Solution Tank
5. Dirty Water Tank Latch
6. Dirty Water Tank Handle
7. Brushes
8. Dirty Water Tank
9. Dirty Water Tank Door
10. Dirty Water Tank Lid
11. Power Cord
12. Quick Cord Release
13. Attachment Water Supply Port
14. Handle Release Pedal
15. Power On/Off Switch
16. Upper Handle Screw
17. Upper Cord Clip
18. Upholstery/Stair Base Water
Supply Connector
19, Upholstery/Stair Hose Adapter
20. Upholstery/Stair Hose
21. Upholstery/Stair Trigger
22. Upholstery/Stair Attachment
23. Solution Tube Clip
17
i 11
15
4
_. j12
6
7
18
"_ _13
_ _14
16
23
Operate cleaner only at voltage specified
on data plate on bottom of cleaner.
This cleaner is intended for household use.
PREPARINGTHECARPET
• IMPORTANT•
Do not use the carpet cleaner as a dry vacuum.
1. Vacuum carpet thoroughly, Use a Hoover®
vacuum cleaner with a revolving brushroll for best
results.
2. Remove as much furniture from the room as
possible. If unable to remove the furniture, place
plastic or foil under and around the legs until the
carpet has dried completely.
Checkfor Color Fastness
Before cleaning carpet/upholstery, test for color
fastness. Dampen a white cloth with solution. Test a
small area in a closet or under a cushion. Gently rub
the cloth over the area. Check each color for color
bleeding. If the cloth remains clean, it should be
safe to clean the carpet/upholstery.
Helpful Hints for Cleaning Carpet
1. Do not oversaturate carpet with cleaning solution
while using the carpet cleaner.
2. For heavily soiled areas, additional applications
may be necessary.
3. Allow plenty of time to dry carpet thoroughly.
4. Wipe cleaning solution from woodwork and wood
to prevent any damage.
5. Try not to walk on carpet until it is completely dry.
6. After carpet is thoroughly dry, vacuum the carpet
using a cleaner with a revolving brushroll.
7. Before cleaning, determine where you will start
and end, making sure not to walk over previously
cleaned areas.
After Cleaning
• Allow carpet to dry completely. Try not to walk on
the carpet until it is dry.
• If you need to walk on the carpet, place white
towels on the areas you want to walk.
• If the carpet is not dry and the furniture must be
placed back in the room, use plastic or foil under the
furniture to prevent staining the carpet.
• Thoroughly clean the dirty water tank with hot tap
water. See page 10.
A WARNINGA
Do not store the carpet cleaner in garage or area
where unit could freeze.
REMOVEANDREPLACECLEANWATERSOLUTIONTANK
2.2 Press clean Clean Water Solution Tank latch
(Diagram A). Tilt Clean Water Solution Tank away
from cleaner and remove (Diagram B).
2.3 Unscrew measuring cap from back side of
Clean Water Solution Tank.
2.4 Fill measuring cap with solution 5 times,
(approximately 5 oz.).
2.5 Fill remaining Clean Water Solution Tank with
hot tap water. Replace measuring cap.
2.6 Place bottom of Clean Water Solution Tank into
cleaner and position until the lever snaps into place.
• IMPORTANT•
Use only Hoover _ brand detergent. Using other cleaning solutions may
cause excessive foaming. Excessive foam will cause the float to shut off
the cleaner prematurely. Using other detergents can void your warranty.
CARPETCLEANING
2.7 Plug cord into electrical outlet. Step on handle
release pedal, to put unit in cleaning position.
2.8 Turn power switch to the "ON" position.
• IMPORTANT•
Never leave unit unattended with power on.
Turn OFF when emptying and filling tank. Do
NOT oversaturate the carpet.
2.9 While depressing solution spray trigger, slowly
push unit forward. Release trigger and pull unit
backward in the same path to remove dirty water
and solution from carpet. (For heavily soiled areas,
repeat if necessary).
• IMPORTANT•
If the sound of the motor changes to a high
pitch, this indicates the dirty water tank is full
and must be emptied..
NOTE: For best cleaning results use a steady,
forward and backward motion. Cleaning should be
done at half the speed of dry vacuuming. For
heavily soiled areas, repeat if necessary.
ABOVEFLOORCLEANING/
ATTACHMENTS
2.10 Put cleaner in its upright position. Connect the
upholstery attachment to the trigger adaptor.
2.11 Remove the dirty water tank door.
2.12 Insert the hose adaptor into the dirty water tank.
2.13 Connect the base water supply connector into
the fitting on the lower left side of handle facing
cleaner (A).
Attachment Usage
2.14 Turn power switch on. While depressing
solution spray trigger, push attachment forward.
Release trigger and pull attachment backward in
the same path to remove dirty water and solution
from upholstery. (For heavily soiled areas, repeat if
necessary.)
• IMPORTANTo
Do NOT oversaturate the upholstery.
FOR BEST CLEANING RESULTS USE STEADY, MODERATE,
FORWARD AND BACKWARD MOTION. Make sure upholstery is dry
before use.
If the hose attachment door is not replaced, there will be no suction through
the nozzle and the unit will not operate properly.
STORINGTOOLS
Place hose and
upholstery attachment
into their storage
locations. Store for next
use.
Upholstery/
StairHose
I
Stair
Upholstery/
Attachment
CARRYHANDLE
Grasp the carry handle
on the front of the unit
to move unit from room
to room.
• IMPORTANTo
Do not transport the carpet cleaner with either
the Clean Water Solution Tank or Dirty Water
Tank full.
DIRTYWATERTANK
Your carpet cleaner is equipped with a shut off valve
within your dirty water tank. When the dirty water
tank becomes full, the blue float (viewed from top of
tank) will rise, shutting off the airflow thru the nozzle.
NOTE: The float in your carpet cleaner, located inthe
dirty water tank lid, will shut off the suction when the
dirty water tank is full. For best results, use smooth,
steady motion keeping the nozzle flat against the
carpeting. Tipping the cleaner and breaking the seal
of the nozzle and carpeting willcause the float to rise
and shut off the suction. Once the float is activated,
empty the dirtywater tank. Ifthe dirty water tank does
not appear full, turn the power switch off and wait for
the float to settle and reset. If the float repeatedly
shuts off the suction, empty the dirty water tank. For
best results, use only Hoover_ brand detergent.
Other Solutions may generate excessive foam which
will cause the float to rise prematurely and shut off
the suction. Use five capfuls (5 ounces) of Hoover_
brand detergent per fill up of the Clean Water
Solution Tank. A higher concentration of shampoo
may cause excessive foaming.
• IMPORTANTo
You will hear a noticeable change in the pitch of
the cleaner. This indicates a need to empty the
dirty water tank.
A WARNINGA,
To reduce the risk of injury from moving parts,
unplug before servicing.
To reduce the risk of fire, electric shock or injury,
unplug before servicing.
How to Empty
2.17 Grasp top of dirty water tank handle and push
latch to release.
2.18 Grasp handle and pull tank out of base.
2.19 Remove dirty water tank lid.
2.20 To empty dirty water tank, grasp handle with
one hand and nozzle with the other and empty into
sink. Replace dirty water tank lid.
2.21 Rinse dirty water tank and filter with hot tap
water. Wipe and let dry thoroughly before storing to
prevent mildew from forming.
• IMPORTANT•
Do not use any chemicals when cleaning.
10
Placing Dirty Water Tank in Base of Cleaner
2.22 Lift front base of r
cleaner off carpeting with
one hand.
2.23 Grasp handle and
hook front of dirty water
tank into base of cleaner,
making sure front of dirty
water tank is resting on
the base (Diagram A).
The Dirty Water Tank has
3 tabs on the underside
which MUST latch into the underside of the base of the cleaner. It is very
important to liftthe base of the cleaner off of the carpeting and hook the nozzle to
the base so that the nozzle is flush with the base of the cleaner (Diagram B).
Failure to installthe Dirty WaterTank correctly (Diagram C), will result in poor dirty
water pickup. The Dirty Water Tank will need to be emptied once or twice per fill
up of the Clean Water Solution Tank.
2.24 While making sure the front of the upper lower Dirty Water Tank is
resting on the base, place the rear of the tank into the base of the cleaner.
Push handle down until it latches.
\
__4,\ _ ,,
A
• IMPORTANTo
Do not storecleaner with solution in Clean Water Solution Tankor dirty water
in Dirty Water Tank. Mineral deposits and mildew can form which will affect
the performance of your carpet cleaner.
CL'I =
Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure
continued cleaning effectiveness.
Any other servicing should be done by an authorized service representative.
,& NOTICEA
A Thermal Protector has been designed into your cleaner to protect it from overheating. When the
thermal protector activates the cleaner will stop running.
If this happens proceed as follows:
1.Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty Dirty Water Tank and clean filters.
3. Inspect and remove blockage. This blockage may occur at the exhaust, inlet, hose, and filters.
4. When cleaner is unplugged and motor cools for 30 minutes, the thermal protector will deactivate
and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your cleaner
needs servicing.
11
BELTORBRUSHROLL:How to Remove and Replace
,& WARNING,&
To reduce the risk of injury from moving parts -
unplug cleaner before changing belt.
How to Remove
3.1 Flip cleaner on its side to expose nozzle base.
3.2 To remove belt cover, use Phillips screwdriver
to remove the two screws. Arrows show location of
screws.
3.3 Grasp belt cover near brushroll and lift out.
3.4 Grasp brushroll with one hand, using other
hand to keep tension on belt when removing. Lift up
when pulling out.
How to Replace
3.5 Remove belt. Dispose of old belt.
3.6 Place belt on motor shaft, then slip brushroll
through belt. Place belt in area of brushroll without
bristles.
3.7 With belt in place, pull and slide brushroll into
nozzle, making sure that the brushroll end caps are
in the correct orientation (Diagram A).
3.8 Replace belt cover by inserting end furthest
from brushroll first. Then place front of belt cover
into position. Secure by replacing the two screws.
• IMPORTANT•
Rotate brushroll manually to make sure belt is
not twisted or pinched.
12
Ifaminorproblemoccurs,it usuallycanbesolvedquiteeasilywhenthecauseis foundbyusingthe
checklistbelow.
Anyotherservicingshouldbedonebyanauthorizedservicerepresentative.
A, WARNINGA
To reduce risk of personal injury - unplug cleaner before servicing.
PROBLEM
Cleaner won't
run
Cleaner won't
pick-up or low
suction
Water escap-
ing from
Cleaner
Cleaner won't
dispense
POSSIBLECAUSE POSSIBLESOLUTION
rd ot_; ;_ _a ........................
!:i i
2. Blown fuse or tripped breaker. 2. Check fuse or breaker in home. Replace
fuse/reset breaker.
i ati:i i:i : _:_ i! _ v
ii
1. Dirty Water Tank Door not
installed.
3. Dirty Water Tank is full,
5. Foam filter is dirty.
2. Dirty Water tank is not installed
correctly.
1, Clean Water Solution Tank not
installed properly.
1. Insert Dirty Water Tank Door - Pg. 9.
3. Empty Dirty Water Tank - Pg. 10.
5. Clean filter. Review Emptying & Cleaning the
Dirty Water Tank - Pg. 10.
2. Review Placing Dirty Water Tank in base of
cleaner- Pg. 11.
1. Review Clean Water Solution Tank
Installation - Pg. 8.
Cleaner
attachments
won't pick up
Cleaner
attachments
won't spray
Motor noise
becomes
high-pitched
1. Hose is clogged.
3. Dirty Water Tank is full.
1.The float inthe Dirty Water Tank
has been activated.
13
ati i! 6i at _r.
1. Remove hose and tools; remove obstruction
- Pg. 9.
3. Empty Dirty Water Tank - Pg. 10.
1. Review Emptying & Cleaning the Dirty Water
Tank - Pg. 10.
To obtain approved Hoover _ service and genuine Hoover _ parts, locate the nearest Authorized Hoover _
Warranty Service Dealer (Depot) by:
• Checking the Yellow Pages under "Vacuum Cleaners" or "Household".
• Visit our website at hoover.com (U.S. Customers) or hoover.ca (Canadian customers).
Follow the service center link to find the service outlet nearest you.
• For an automated referral of authorized service outlet locations call 1-800-944-9200.
Do not send your cleaner to Hoover ®, Inc., Company in Glenwillow for service. This will only result in delay.
If you need further assistance:
To speak with a customer service representative ca111-800-263-6376;Mon-Fri 8am-7pm EST. In Canada,
contact Hoover_ Canada, Toronto: 755 Progress Ave., Scarborough, ON M1H 2W7 OR Hoover_ Canada,
Edmonton: 18129-111Ave., Edmonton, AB T5W 2P2, Phone: 1-800-263-6376, Mon-Fri 8am-7pm EST.
Always identify your cleaner by the complete model number when requesting information or ordering parts.
(The model number appears on the bottom of the cleaner.)
Please do not return this product to the store.
14
WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only
Hoover _ cleaning products and Hoover _ hard surface attachments intended for use with the appliance as
noted below.
r
Hoover®
Quick&
Light....
Hoover®
SteamVac®
Hoover®
SteamVac®
DualV®
Hoover®
SteamVac®
DualV®
AllTerrain
Hoover
Deep
Cleansing
Vlt
Vlt
Vlt
Vlt
PremiumPet
Vlt
Vlt
Vlt
Vlt
Oxy
Vlt
Vlt
Vlt
Vlt
Anti-Allergen_
Vlt
Vlt
Vlt
Vlt
HardFloor
Vlt
Hoover
Platinum
Collection®
Professional
Strength
Vlt
Vlt
Vlt
Vlt
Hoover
Platinum
Collection®
Pet Plus
Vlt
Vlt
Vlt
Vlt
_,_,no_ vlt vlt vlt vlt vlt vlt
Collection®
Hoover® _/
FloorMate®
Allergens:pollen,pet dander,dirt,anddust.
2When cleaning a hard surface, the Hoover_ 3 When cleaning a hard surface, the optional
hard surface attachment below must be used Hoover_ hard surface attachment below
(optional if not included): must be used:
5 Brush/Dual Brush Hoover_ part # 48417008. 6 Brush Hoover_ part # 36419008
5 Brush Hoover_ part # 48417007.
For optimal performance
use Hoover ®brand
detergents, wipes, and
spot cleaners available at
Hoover.com
and retailers nationwide.
15