Hoover AVC48 Instruction Manual

Page 1
Instruction Manual HOOVER CARVAC AVC48
Please read and understand this manual before operating this appliance
Page 2
Page 3
LATCH
CREVICE TOOL
SMALL DETAIL BRUSH
SQUARE DETAIL BRUSH
FLEXIBLE HOSE
PRIMARY ADAPTER
DUST CUP (DIRT) REMOVAL
Remove dirt after each use by rstly switching
off cleaner. Hold cleaner vertically with the nozzle end pointing downwards to avoid spillage and press the latch button on top and
release the dust cup. Remove lter assembly from dust cup, empty dust. Wash lter and
dust cup interior, dry thoroughly and replace.
Wash by hand only in warm, soapy water.
OVERLOAD PROTECTION
Your cleaner is protected by a 10 amp fuse that is tted in the cigarette plug of the appliance. If the appliance should cease operating check fuse by unscrewing cigarette plug end cap and replace fuse if blown. Replace with a 10 amp, anti­surge type - NEVER bypass or use a larger or smaller rated fuse. If appliance
still fails to operate, return to point of purchase.
CLEANING AND MAINTENANCE
Do not use any chemicals to clean your cleaner. Use a slightly dampened cloth
and then dry thoroughly.
If washing lter and dust cup DO NOT place in washing machine and make sure lter and dust cup are completely dry before reassembly.
TROUBLESHOOTING
1. Unit wont work: Not plugged in or fuse blown
2. Low or no suction: Dust cup full or dirty lters.
3. Dust leaking from the unit: Dust cup full or not correctly tted dust cup.
TECHNICAL SPECIFICATIONS
Model No. Hoover AVC48 Voltage: 12 volts DC negative earth Motor Rating: 60-80 watts
Page 4
Loading...