Hoover A 089 User Manual

A 089

English

INDEX

Introduction

General points on delivery

Guarantee

Safety Measures

Technical Data

Setting up and Installation

Control Description

Detergent drawer

Selection

The Product

Ta ble of Programmes

Customer Awareness/Washing

Cleaning and routine maintenance

Faults Search

CHAPTER

OUR COMPLIMENTS

With the purchase of this Hoover household appliance, you have shown that you will not accept compromises: you want only the best.

Hoover is happy to present their new washing machine, the result of years of research and market experience through direct contact with Consumers. You have chosen the quality, durability and high performance that this washing machine offers.

Hoover is also able to offer a vast range of other household appliances: washing machines, dishwashers, washer-dryers, cookers, microwave ovens.Traditional ovens and hobs, refrigerators and freezers.

Ask your local retailer for the complete catalogue of Hoover products.

Please read this booklet carefully as it provides important guide lines for safe installation,use and maintenance and some useful advise for best results when using your washing machine.

Keep this booklet in a safe place for further consultation.

When contacting Hoover or a Customer Services Centre always refer to the Model, No., and G number (if applicable of the appliance see panel).

CHAPTER 2

GUARANTEE

The appliance is supplied with a guarantee certificate which allows free use of the Technical Assistance Service, apart from a fixed call out charge,for a period of one year from the date of purchase.

Remember to post part B of the guarantee certificate within 10 days of the purchase date.

Part A should be filled in and kept by you to be shown if necessary to the technician from the Technical Assistance Service. The sales receipt should also be kept.

CHAPTER 1

GENERAL POINTS ON DELIVERY

On delivery, check that the following are included with the machine:

A) INSTRUCTION MANUAL

B) CUSTOMER SERVICE ADDRESSES

C) GUARANTEE CERTIFICATES

D) CAP

E) BEND FOR OUTLET TUBE

F) LIQUID DETERGENT COMPARTMENT

KEEP THEM IN A SAFE PLACE

Check that the machine has not incurred damage during transport. If this is the case, contact your nearest Hoover Centre.

EUROPE

Dovunque

tu sia.

SPEDIRE

TRATTENERE



● Do not use adaptors or multiple plugs.

● Do not allow the appliance to be used by children or the

incompetent without due supervision.

● Do not pull the mains lead or the appliance itself to

remove the plug from the socket.

● Do not leave the appliance exposed to atmospheric

agents (rain, sun etc.)

● In the case of removal,never lift the appliance by the

knobs or detersive drawer.

● During transportation

do not lean the door against the trolley.

Important!

When the appliance location is on carpet floors, attention must be paid so as to ensure that there is no obstruction to the bottom vents.

● Lift the appliance in pairs as illustrated in the diagram.

● In the case of failure

and/or incorrect operation, turn the washing machine off, close the water inlet tap and do not tamper with the appliance. Contact a Hoover Technical Assistance Centre for any repairs and ask for original Hoover spare parts. Avoidance of these norms may compromise the safety of the appliance.

● Should the supply cord (mains cable) be demaged, this is

to be replaced by a specific cable available from the after sales service centre.

CHAPTER 3

SAFETY MEASURES

IMPORTANT: FOR ALL CLEANING AND MAINTENANCE WORK

● Remove the plug

● Turn off the water inlet tap.

● All Hoover appliances are earthed. Ensure that the main

electricity circuit is earthed. Contact a qualified electrician if this is not the case.

This appliance complies with Directives 89/336/EEC,

73/23/EEC and following changes.

● Do not touch the appliance with wet or damp hands or

feet.

● Do not use the appliance when bare-footed.

● Extreme care should be taken if extension leads are used in

bathrooms or shower rooms.Avoid this where possible.

WARNING: DURING THE WASHING CYCLE, THE WATER CAN REACH A TEMPERATURE OF 90°C.

● Before opening the washing machine door,ensure that

there is no water in the drum.

90° C

CHAPTER 5

SETTING UP INSTALLATION

Move the machine near its permanent position without the packaging base.

Cut tube-holding straps.

Unscrew the central screw (A); unscrew the 4 lateral screws (B) and remove the cross piece (C).

Lean the machine forward and remove the plastic bags containing the two polystyrene blocks at the sides, pulling downwards.

Press the plug (to be found in the envelope with the instructions) into the hole.

WARNING: DO NOT LEAVE THE PACKAGING IN THE REACH OF CHILDREN AS IT IS A POTENTIAL SOURCE OF DANGER.

MPa

CHAPTER 4

kg 5

8˙÷15

2150

1,75

800

min. 0,05

max. 0,8

230

kWh

giri/min.

WATER PRESSURE

SUPPLY

VOLTAGE

MAXIMUM WASH

LOAD DRY

NORMAL WATER LEVEL

POWER INPUT

ENERGY CONSUMPTION

(PROG. 2)

POWER CURRENT FUSE

AMP

SPIN

r.p.m.

52 cm

85 cm

60 cm

Stick the adhesive label supplied in the appropriate language onto the extractable support from the detergent drawer.

Use front feet to level the machine with the floor.

a) Turn the nut clockwise to release the screw adjuster of the foot.

b) Rotate foot to raise or lower it until it stands firmly on the ground.

c) Lock the foot in position by turning the nut anti-clockwise until it comes up against the bottom of the machine.

Ensure that the Off/On button (C) is not pressed.

Ensure that all the knobs are on the “0” position and that the door is closed.

Insert the plug.

Press the START (C) button.The power on (G) light will light up. If this does not light up see faults search.

Fix the sheet of corrugated material on the bottom as shown in picture.

WATER CONNECTION

Your machine may either be plumbed in or connected to existing taps, using a tap adaptor with a 3/4 B.S.P. threaded end connection. The water supply hoses to be found inside the drum are terminated in two different ways. One end which has a 90° elbow is to be connected to the appliance water connection E while the straight end is to be connected to the domestic supply tap. The hose with the white collar should be connected to the cold tap, and the hose with the red collar to the hot tap. The appliance is not suitable for use with mixer taps.

Hook the end of the outlet hose over the rim of the sink or outlet pipe, making sure that it is not kinked. For better positioning of the outlet hose make use of the plastic bend provided.

Where possible, use a fixed discharge pipe with a diameter greater than that of the outlet hose this allows the air to escape.

The minimum height of the top of the outlet hose should be 50 cm.

Extending the outlet hose, especially if the extension is more than 1 metre, could lead to malfunctioning of the discharge.

The appliance outlet hose should discharge into the foul water drainage system and not into the surface water drainage system. Should you require further advice please contact your local water authority.

HOT WATER

COLD WATER

50 cm.

+ 11 hidden pages