Hoover 5011 All-Rounder User Manual
all-rounder
all-rounder
Mini Compact Bagless
Vacuum Cleaner
Cyclonic Bagless Technology
Washable HEPA Filtration
Compact, Lightweight
& Stylish Design
2.
1
4
6
2
5
3
8
11
12
13
10
14
9
7
15
Features
3.
Features:
1. Handle
2. 2-in-1 Accessory
3. Air Outlet
4. Crevice Tool
5. Hose
6. Telescopic Tube
7. Floor Head
8. Handle
9. Dust Canister Release Button
10. Dust Canister
11. On/Off Button
12. Upright Park
13. Power Cable
14. Cable Rewind Button
15. Hard Floor Cleaning Tool
Specifications:
Watts: 110 0W M ax
Dust Capacity: 0.6L
Noise Level: <78dBa
Telescopic Tube: Chrome
Power Cable Length: 5m
Weight: 4.5kg
Please contact Hoover Customer Care 1300 360 845,
NZ (09) 263 7573 to find your local spare parts provider.
5011 All-Rounder
Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many useful
features built into your cleaner and we recommend that you carefully read this instruction manual
so that you may take best advantage of them.
4.
Before you Begin
This cleaner must be operated in accordance with these instructions and used only for domestic
household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics.
This cleaner is not fit to be used as an industrial cleaner hence will void the manufacturer’s warranty if
used inappropriately.
Please read these instructions thoroughly
This will ensure you obtain full benefit from your new cleaner. Keep this Instruction Manual in a handy
place for future reference.
Important
Always switch the cleaner off and remove the plug from the electricity supply before cleaning your
appliance, when not in use, or attempting any maintenance task. The cleaner must only be connected to
an AC supply at the voltage shown on the rating plate. This cleaner should only be used for its intended
purpose as described in these instructions.
Before you Begin
5.
Before you Begin
Precautionary measures:
1. Do not operate the vacuum cleaner too close to heaters, radiators, and other
hot surfaces.
2. Before inserting the plug into the wall, make sure your hand is dry.
3. Before turning on the vacuum cleaner, remove any large or sharp objects from the
floor or cleaning surface in order to prevent damage to the filter.
4. When you want to pull the plug from the wall, do not use the power cable, gently
pull the plug from the power socket.
5. Do not use vacuum cleaner to pick up water or liquids.
6. If the hose inlet, combination floor tool or telescopic tube are blocked, you should
switch off the cleaner straight away and remove from mains power. First clear
the blocked substance before attempting to start the vacuum cleaner again.
Loading...