Hooker Furniture 5300908BED, 530090860 Assembly Guide

1/3

ASSEMBLY INSTRUCTION

ITEM# 5300-90867 6/6-6/0 Upholstered Mantle Panel Headboard

5300-90868 6/6-6/0 Panel Footboard
5300-90869 6/6 Panel Rails
5300-90863 6/0 Panel Rails

Caution: Please make sure you have all parts indicated below prior to assembly.

This bed is heavy and can best be assembled with the help of two or more persons.

See Diagram 1

See Diagram 2
See Diagram 5

See Diagram 3

2/3

Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails.

Assembly steps:

1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the end

of side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten nuts (E)

securely with spanner wrench (F). (See diagram 1)

Diagram 1

2. Take out center supports (L) from the rail box, attach center supports (L) to slats by using 2 bolts

(Q), 2 lock washers (V) and 2 flat washers (U). Secure bolts (Q) by using allen wrench (R). (See

diagram 2)

Diagram 2

3 Attach slats (D) to side rails (C), align pre-drilled holes on the slat to holes on the cleat of side rail

(C), using screws (K) to tighten both. (See diagram 3)

Diagram 3