Hooker Furniture 529190008 Assembly Guide

ASSEMBLY INSTRUCTION

Item#: 5291-90008 Mirror
Item#: 5291-90002 Seven-Drawer Dresser

** Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more persons.

Assembly Steps:

1. Place the mirror on the top of dresser. Be sure to position mirror in the middle of top. The back
bottom edge of the mirror and the back edge of the top should be flushed.

2. Attach a mending plate (C) at back of mirror and back of dresser. Align holes on mending plate
to the pre-drilled holes at the back of dresser and tighten 4pcs of screws (D) through the holes.
Tighten another 4 screws (D) at random location through mending plate to mirror frame with
care.

3. Repeat step 2 for another mending plate (C).

Caution: Do not over tighten.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.