Hooker Furniture 529175200 Assembly Guide

ASSEMBLY INSTRUCTION

Diagram 1

Assembly Steps:

1. Place table top upside down on a soft
surface to prevent from scratching.

2. Attach one leg as labeled to table top by
using bolt (A), lock washer (C) and flat
washer (B). Tighten them securely with
allen wrench (D). (See diagram 1)

3. Repeat step 2 to install the rest of 3 legs
onto table top.

Diagram 2

Instruction for table leaves:

1. There are latches at the bottom of table

top, turn off the latch as shown in
diagram 1.

2. Pull out table top as the arrow direction

shown in diagram 2

3. Place table leaves between and push

table tops together. Then turn on
latches.

4. Take opposite actions to remove table

leaves.

Item#: 5291-75200 Rectangle Leg Dining Table w/2-18in Leaf

** Please make sure you have all parts indicated below prior to assembly.

This top is heavy and can best be assembled with the help of two or more persons.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.