Honeywell VisionPRO 8000 Catalog Page
Programmable Thermostats
VisionPRO® 8000 with RedLINK™
VisionPRO® 8000 with RedLINK™ is a 7 day programmable touchscreen thermostat that is selectable for residential or light commercial use. The thermostat can be wired directly to the equipment, used with the THM5421R1021 Equipment Interface Module or used with the THM4000R1000 TrueZONE Wireless Adapter. Works with the RedLINK™ accessories including the RedLINK™ Internet Gateway, Portable Comfort Control, Wireless Outdoor Sensor, Wireless Indoor Sensor, Wireless Entry/Exit Remote and Wireless Vent and Filter Boost Remote.
•Thermostat works standalone or with a THM5421R1021 Equipment Interface Module or with a TrueZONE Wireless Adapter.
•Smart Schedule - programs in seconds for any lifestyle.
•Patented interview based programming and installer setup.
•RedLINK™ wireless communication.
•Increase profit per job by including RedLINK™ accessories that provide comfort and convenience.
•Selectable for residential and light commercial applications. Meets commercial code and is title 24 compliant.
•Light commercial - commercial language (occupied and unoccupied), schedule holidays and custom events, remote setback, economizer and time of day. Remote Setback requires THM5421R1021 Equipment Interface Module.
•Plain language setup, no manual needed.
•Keeps a searchable history of alerts and setting changes to the thermostat to determine if there is a system malfunction or if the issue was caused by a user error. Saves time in troubleshooting.
•Customizable Service Reminders allow dealers to remind their customers when it is time to call for service, when their warranty is expiring and to provide customized alerts.
•MicroSD port for copying the Installer Setup, Customizable Reminders, Custom Events and Holidays to multiple thermostats.
•MicroSD port for adding the dealer's contact information on the screen.
•1 assignable output on the TH8321 model to control humidification, dehumidification, ventilation or a stage of heating/cooling.
•3 assignable outputs on the Equipment Interface Module to control humidification, dehumidification, ventilation or a stage of heating/ cooling. The TH8110 and TH8320 models require the use of a Wireless Indoor Sensor to control humidification and dehumidification.
•1 assignable input can be used with a wired outdoor, indoor or discharge sensor.
•4 assignable inputs on the Equipment Interface Module can be used with wired outdoor, indoor or discharge/return sensors, occupancy sensor for remote setback and dry contact devices to trip prepackaged or custom alerts.
•Dual powered - battery or hardwired (C wire).
Applications: Residential or commercial use. 7 day programmable. Works
standalone or with the THM5421R1021 Equipment Interface Module.
Dimensions, Approximate: 4 5/8 in. High, 4 15/16 in. Wide, 1 1/8 in. Deep (118 mm. High, 126 mm. Wide, 29 mm. Deep)
Display Size: 10 sq in.
Color: Arctic White
Programmability: 7-Day Multiple Day Programming or Non-Programmable Changeover: Auto or Manual
Electrical Ratings: 18 to 30 Vac or 750 mV Frequency: 50 Hz; 60 Hz
Electrical Connections: Screw terminals
Operating Humidity Range (% RH): 5 to 90% RH, non-condensing Humidification Setting Range: 10 to 60% RH.
Dehumidification Setting Range: 40 to 80% RH.
Operating Temperature Range (F): 32 F to 120 F (0 C to 48.9 C)
Temperature Setting Range: Heat: 40 F to 90 F; Cool 50 F to 99F, (Heat: 4.5 C to 32.0 C; Cool: 10 C to 37.0 C)
Power Method: Battery or Hardwired
Used With: Used with optional THM5421R1021 Equipment Interface Module and RedLINK® accessories
Accessories:
REM5000R1001-Portable Comfort Control uses RedLINK™ to sense and control room temperature anywhere in the home. Works in both zoned and non-zoned applications.
THM6000R1002-RedLINK Internet Gateway THM4000R1000-Wireless Adapter for use with RedLINK™ enabled
thermostats and TrueZONE™ system THM5421R1021-Equipment Interface Module
YTHM5421R1010-Equipment Interface Module Kit with 2 Duct Sensors. REM1000R1003-Wireless Entry/Exit Remote
HVC20A1000-Wireless Vent and Filter Boost Remote C7089R1013-Senses outdoor temperature and humidity to display on
RedLINK™ enabled thermostats and accessories. C7189R1004-Wireless Indoor Air Sensor. THP2400A1019-Coverplate assembly for use with the RedLINK®
VisionPRO®. Includes a coverplate, bracket for j-boxes and mounting hardware. Coverplate is 5-3/4 in. x 6-5/32 in.
|
|
|
|
|
|
|
Terminal |
|
Switch Positions |
Switch |
|
Material Number |
Designations |
Stages |
(System) |
Positions (Fan) |
Includes |
|
|
|
|
|
|
TH8321R1001/U |
R, RC, C, W-O/B, |
Up to 3 Heat / 2 Cool Heat Pump or Up to 2 |
HEAT-OFF-COOL- |
AUTO-ON- |
Includes a set of Universal |
|
W2-AUX/E, Y, Y2, |
Heat / 2 Cool Conventional when used |
AUTO-EM.HEAT |
CIRC-FOLLOW |
IAQ contacts to control |
|
G, A-L/A, K, U1 U1, |
standalone. |
|
SCHEDULE |
humidification, |
|
S1 S1 |
Up to 4 Heat / 2 Cool Heat Pump or Up to 3 |
|
|
dehumidification or |
|
|
Heat / 2 Cool Conventional when used with |
|
|
ventilation. |
|
|
the Equipment Interface Module. |
|
|
|
|
|
|
|
|
|
TH8320R1003/U |
R, RC, C, W-O/B, |
Up to 3 Heat / 2 Cool Heat Pump or Up to 2 |
HEAT-OFF-COOL- |
AUTO-ON- |
— |
|
W2-AUX/E, Y, Y2, |
Heat / 2 Cool Conventional when used |
AUTO-EM.HEAT |
CIRC-FOLLOW |
|
|
G, A-L/A, K, S1 S1 |
standalone. |
|
SCHEDULE |
|
|
|
Up to 4 Heat / 2 Cool Heat Pump or Up to 3 |
|
|
|
|
|
Heat / 2 Cool Conventional when used with |
|
|
|
|
|
the Equipment Interface Module. |
|
|
|
|
|
|
|
|
|
TH8110R1008/U |
R, RC, C, W-O/B, Y, |
Up to 1 Heat / 1 Cool Heat Pump or Up to 1 |
HEAT-OFF-COOL- |
AUTO-ON- |
— |
|
G, K, S1 S1 |
Heat / 1 Cool Conventional when used |
AUTO |
CIRC-FOLLOW |
|
|
|
standalone. |
|
SCHEDULE |
|
|
|
Up to 4 Heat / 2 Cool Heat Pump or Up to 3 |
|
|
|
|
|
Heat / 2 Cool Conventional when used with |
|
|
|
|
|
the Equipment Interface Module. |
|
|
|
|
|
|
|
|
|
504 |
customer.honeywell.com |
70-6910 |
Loading...