Cartridge Cage Valves
Sweat Connection
NPT Connection
B
AB
A
3-9/16
(90)
3-3/4 (94)
C
2-3/4 (68)
D
C D
PIPE FITTING SIZES IN. MM IN. MM
3/8" FLARE 3-7/8 98 5-11/32 136
1/2" SWEAT 3-1/2 89 5-1/8 130
1/2" FLARE 3-7/8 98 5-11/32 136
1/2" INVERTED FLARE
1/2" NPT (int.)
3/4" NPT (int.) 3-11/16 94 5-1/8 130
3/4" SWEAT 5-3/16 132
1" NPT (int.) 136
1" SWEAT 5-11/32
1-1/4" SWEAT 4-5/16 110 5-5/8 142
1-1/4" NPT (int.)
1
1
1
NO ADAPTERS
M16840
1
VCZM; VCZN Three-way Cartridge Cage Valves
Three-way Cartridge Cage Valves are intended for hydronic
applications in a normal indoor environment to control the flow of
hot water or chilled water glycol solution to 60% concentration.
These valves are designed for zone control of heating/cooling
systems, or to control individual fan coil, baseboard radiator or
convector applications. Depending on the model selected they can
be controlled by SPST or SPDT two position controller, tristate
(floating), or modulating proportional controller. For best control,
outdoor temperature compensation of supply water temperature is
recommended. For trouble-free operation of the product, good
installation practice must include initial system flushing, chemical
water treatment, and the use of a 50 micron (or finer) system side
stream filter(s). Remove all filters before flushing.
• Quick open and linear flow characteristics available
• Mixing or diverting application
• A-AB-B body pattern
• 7000-series valves for floating and modulating non-fail safe applications
• 6000-series valves for two-position control
• High close-off rating independent of Cv
• Available with a variety of North American and international pipe fittings
• No tools required for actuator installation or removal
• Actuator removal does not require draining system
• Service is by replacement of cartridge, not valve body
• Cartridge replacement rebuilds valve to factory-new condition
Commercial
Dimensions in inches (millimeters)
Valve Type: Cartridge Cage Valve
Valve Action: Stem up to close A port
Body Pattern: Three-way A-AB-B
Controlled Medium: Chilled or hot water with up to 60% Glycol
Maximum Safe Operating Pressure: 300 psi (2068 kPa (20 Bar))
Maximum Differential Pressure Ratings (Close-off): (414 kPa; 60 psi
(4 bar))
Fluid Temperature Range: 34 F to 203 F (1 C to 95 C)
Ambient Temperature Range: 32 F to 150 F (0 C to 65 C)
Stem Travel: 0.4 in. (10 mm)
Components
Materials
(Body): Bronze
(Stem): Stainless Steel
(Seat): EPDM O-ring seals on Noryl piston
(Cartridge): Ryton™, Noryl™ engineering plastic
(Packing): EPDM rubber
Approvals
Canadian Standards Association: CSA Certified
Accessories:
40007029-002-Wrench for cartridge (included with sweat valves
and all replacement cartridges)
70-6910 565
Cartridge Cage Valves
Valves with Linear Flow Characteristics
Comments: Characterized cartridge; Can be controlled by either a low or a line voltage SPDT or SPST or floating controller
Valve Size Flow Capacity Timing (sec,
Product Number
VCZMA6100/U 1/2 in. DN15 3.7 Cv 3.2 kvs On/Off models
VCZMC6100/U 1/2 in. DN15 3.8 Cv 3.3 kvs On/Off models
VCZMD6100/U 1/2 in. DN15 3.2 Cv 2.74
kvs
VCZMK6100/U 3/4 in. DN20 6.6 Cv 5.7 kvs On/Off models
VCZML6100/U 3/4 in. DN20 6.6 Cv 5.7 kvs On/Off models
VCZMR6100/U 1 in. DN25 8.3 Cv 7.1 kvs On/Off models
VCZMS6100/U 1 in. DN25 8.3 Cv 7.1 kvs On/Off models
VCZNB6100/U 1/2 in. DN15 3.7 Cv 3.2 kvs On/Off models
VCZND6100/U 1 1/4 in. DN32 9.0 Cv 7.7 kvs On/Off models
VCZNE6100/U 1 1/4 in. DN32 9.0 Cv 7.7 kvs On/Off models
min.) when
used with VC
series Actuator
with 6 seconds
with 6 seconds
On/Off models
with 6 seconds
with 6 seconds
with 6 seconds
with 6 seconds
with 6 seconds
with 6 seconds
with 6 seconds
with 6 seconds
Connection Type Actuation Used With Includes(inch) DN (Cv) (Kv)
Sweat Must be purchased
separately
Flare Must be purchased
separately
Inverted
Flare
Female
NPT
Sweat Must be purchased
Female
NPT
Sweat Must be purchased
Female
NPT
Female
NPT
Sweat Must be purchased
Must be purchased
separately
Must be purchased
separately
separately
Must be purchased
separately
separately
Must be purchased
separately
Must be purchased
separately
separately
VC actuators, 2-position,
On-Off Type
VC actuators, 2-position,
On-Off Type
VC actuators, 2-position,
On-Off Type
VC actuators, 2-position,
On-Off Type
VC actuators, 2-position,
On-Off Type
VC actuators, 2-position,
On-Off Type
VC actuators, 2-position,
On-Off Type
VC actuators, 2-position,
On-Off Type
VC actuators, 2-position,
On-Off Type
VC actuators, 2-position,
On-Off Type
Valves with Linear Flow Characteristics
Comments: Characterized cartridge for use with non-fail safe floating and modulating actuators
Valve Size Flow Capacity Timing (sec,
min.) when
Product Number
VCZMA7100/U 1/2 in. DN15 3.7 Cv 3.2 kvs 2 minutes Sweat Proportional non-fail
VCZMK7100/U 3/4 in. DN20 6.6 Cv 5.7 kvs 2 minutes Female
VCZML7100/U 3/4 in. DN20 6.6 Cv 5.7 kvs 2 minutes Sweat Proportional non-fail
VCZNB7100/U 1/2 in. DN15 3.7 Cv 3.2 kvs 2 minutes Female
VCZND7100/U 1 1/4 in. DN32 9.0 Cv 7.7 kvs 2 minutes Female
VCZNE7100/U 1 1/4 in. DN32 9.0 Cv 7.7 kvs 2 minutes Sweat Proportional non-fail
used with VC
series Actuator
Connection Type Actuation Used With Includes(inch) DN (Cv) (Kv)
NPT
NPT
NPT
safe, purchase
separately
Proportional non-fail
safe, purchase
separately
safe, purchase
separately
Proportional non-fail
safe, purchase
separately
Proportional non-fail
safe, purchase
separately
safe, purchase
separately
VC6830/VC6831/VC6834;
VC6930/VC6931/VC6934;
VC7930/VC7931/VC7934
VC6830/VC6831/VC6834;
VC6930/VC6931/VC6934;
VC7930/VC7931/VC7934
VC6830/VC6831/VC6834;
VC6930/VC6931/VC6934;
VC7930/VC7931/VC7934
VC6830/VC6831/VC6834;
VC6930/VC6931/VC6934;
VC7930/VC7931/VC7934
VC6830/VC6831/VC6834;
VC6930/VC6931/VC6934;
VC7930/VC7931/VC7934
VC6830/VC6831/VC6834;
VC6930/VC6931/VC6934;
VC7930/VC7931/VC7934
Valves with Linear Flow Characteristics
Comments: Can be controlled by either a low voltage or a line voltage SPDT or SPST or floating controller;
characterized cartridge for use with floating and modulating actuators
Cartridge
changing tool
—
—
—
Cartridge
changing tool
—
Cartridge
changing tool
—
—
Cartridge
changing tool
Cartridge
changing tool
—
Cartridge
changing tool
—
—
Cartridge
changing tool
Valve Size Flow Capacity Timing (sec,
min.) when
Product Number
VCZMR7100/U 1 in. DN25 8.3 Cv 7.1 kvs 2 minutes Female
VCZMS7100/U 1 in. DN25 8.3 Cv 7.1 kvs 2 minutes Sweat Proportional non-fail
566 customer.honeywell.com 70-6910
used with VC
series Actuator
Connection Type Actuation Used With Includes(inch) DN (Cv) (Kv)
NPT
Proportional non-fail
safe, purchase
separately
safe, purchase
separately
VC6830/VC6831/VC6834;
VC6930/VC6931/VC6934;
VC7930/VC7931/VC7934
VC6830/VC6831/VC6834;
VC6930/VC6931/VC6934;
VC7930/VC7931/VC7934
—
Cartridge
changing tool