Honeywell V9010 PRODUCT DATA

V9010

Kombi-RSV

CHECK VALVE

PRODUCT DATA

Application

Check valves are used to avoid gravitational circulation in hydronic heating and cooling systems.

Features

• Low opening pressure due to weight loaded cartridge

• Higher opening pressures on request

• Low flow resistance

• Robust, noise and flow optimized valve housing made

of corrosion resistant red bronze Rg5

• Available up to DN 80

Specifications

Design

The check valve consists of:

•

Valve housing DN10...DN20 with internal threads

according to DIN2999 (ISO7) for threaded pipe, copper or precision steel pipe 10...22 mm using compression ring and screw (see ‘Accessories’)

•

Valve housing DN25...DN80 with internal threads

according to DIN2999 (ISO7)

•

Valve insert with flat sealing

Materials

•

Valve housing made of red bronze

•

Valve insert made of brass

•

Flat sealing made of EPDM

Medium pH-value Operating temperature Operating pressure

(cv)-values

k Opening pressure

Water or glycole-water mixture

8...9,5

2...130 °C (36...266°F) max. 16 bar (232 psi) see flow diagram on page 92 10 mbar (0,145 psi)

Function

The Kombi-RSV check valve opens when a sufficient pressure is applied to the cartrdige of the valve. The cartridge is pressed open by the pressure and the heating or cooling medium can flow through the valve. When the pressure falls below the opening pressure of the Kombi-RSV or when pressure is applied from the wrong direction the valve cartridge closes and the flow is shut-off.

The Kombi-RSV has an opening pressure of 10 mbar (0,145 psi).

KOMBI-RSV (V9010)

Dimensions and Ordering Information

Fig. 1. Dimensions

Table 1. Dimensions and OS-Nos. (OS = ordering system)

DN Pipe kvs (cv)-value Dimensions OS-No.

10 15 20 25 32 40 50 65 80

connection l h SW

Rp3/8" 2,0 (2,34) 60 40 22 19 V9010Y0010 Rp1/2" 2,0 (2,34) 65 40 27 19 V9010Y0015 Rp3/4” 6,0 (7,02) 75 45 32 19 V9010Y0020

Rp1" 6,0 (7,02) 90 45 41 19 V9010Y0025 Rp1 1/4" 14,5 (17,0) 110 60 50 27 V9010Y0032 Rp1 1/2" 14,5 (17,0) 120 60 55 27 V9010Y0040

Rp2" 44,5 (52,1) 150 80 70 36 V9010Y0050 Rp2 1/2" 44,5 (52,1) 180 105 85 41 V9010Y0065

Rp3" 73,0 (85,4) 200 110 100 41 V9010Y0080

Accessories

Connection set consisting of compression screw and ring

3/8" x 10 mm VA650A1010 3/8" x 12 mm VA650A1012 1/2" x 10 mm VA650A1510 1/2" x 12 mm VA650A1512 1/2" x 14 mm VA650A1514 1/2" x 15 mm VA650A1515 1/2" x 16 mm VA650A1516 3/4" x 18 mm VA650A2018 3/4" x 22 mm VA650A2022

NOTE: Support inserts are required for soft steel and

copper pipe (pipe wall thickness 1 mm).

Connection set consisting of 2 compression screws, 2 compression rings and 2 support inserts

3/8" x 12 mm VA651A1012 1/2" x 12 mm VA651A1512 1/2" x 15 mm VA651A1515 1/2" x 16 mm VA651A1516 3/4" x 18 mm VA651A2018

NOTE: Support inserts are required for soft steel and

copper pipe (pipe wall thickness 1 mm).

+ 2 hidden pages