Honeywell V4062B, V4062C User Manual

APPLICATION

The V4062 Gas Valve Actuator in combination with a V5055 or V5097 Gas Valve provides three-position control of the gas supply to commercial and industrial burners.

FEATURES

• When energized, the V4062 Actuator opens the V5055/ V5097 Gas Valve to the low-fire position. The actuator opens the valve to the fully open position when the line voltage contacts are made.

• When used with the V5055, V5097 or VE5000 Gas Valve, the combination is rated for final safety shutoff service.

• Although the V4062 can be used with all V5055 or V5097 Valve models, the V5055/V5097B with characterized guide is recommended for optimum control and low-fire repeatability

V4062A,B,D

HI-LO-OFF Fluid Power

Gas Valve Actuator

PRODUCT DATA

• The standard model has an opening time of 26 seconds at 60 Hz, or 32 seconds at 50 Hz. A fastopening model is available, with timings of 13 seconds at 60 Hz, or 16 seconds at 50 Hz.

• Maximum closing time is one second, which meets code, standard, insurer requirements.

• Damper shaft models are available with or without spring return; shaft extends out both sides and rides in Delrin bushings; used with standard damper crank arm (part no. 7616BR).

• Red OPEN indicator attached to the actuator stem shows when the valve is even slightly open; yellow SHUT indicator on the valve stem shows only when the gas valve is fully closed.

• Ambient temperature range is -40° to 150°F (-40° to 66°C) for 60 Hz models; -10° to 158°F (23° to 70°C) for 50 Hz and 50/60 Hz models.

• Models available with factory adjusted, fieldadjustable, single-pole-double throw (spdt) auxiliary switch rated at 1/2 hp (0.37 kW). Auxiliary switch can be added in the field.

• Low-fire position is adjustable with adjusting wrench, part no. 135796 (included with the actuator).

• Standard enclosure meets NEMA 1 (IP30) general purpose requirements.

• V4062/V5055C,E and V4062/V5097C,E combinations available with a proof-of-closure switch and double valve seal (valve seal overtravel interlock) to meet specific code/standard/insurer requirements.

• Model available to be used with series 60 floating type controller.

• Model available with adjustable maximum flow switch.

Contents

Application .......................................................................... 1

Features.............................................................................. 1

Specifications...................................................................... 2

Ordering Information........................................................... 2

Installation........................................................................... 4

Wiring .................................................................................. 5

Adjustments ........................................................................ 6

Operation ............................................................................ 7

Service and Checkout ........................................................ 8

60-2099-8

V4062A,B,D HI-LO-OFF FLUID POWER GAS VALVE ACTUATOR

SPECIFICATIONS

IMPORTANT:

Models:

Electrical Ratings:

120V /60 Hz 59.5 129 19.0 28.0 100V

50/60 Hz 200V

50/60 Hz

The specifications given in this publication do not include normal manufacturing tolerances. Therefore, this unit may not exactly match the listed specifications. Also, this product is tested and calibrated under closely controlled conditions, and some minor differences in performance can be expected if those conditions are changed.

V4062A HI-LO-OFF Gas Valve Actuator. V4062B HI-LO-OFF Gas Valve Actuator, high pressure. V4062D HI-LO-OFF Gas Valve Actuator with proof-of-

closure switch. Use with V5055/V5097C,E (double seal) gas valves for valve seal overtravel interlock. Do not use V4062 with V5034 Valve body.

Standard V4062A,D Actuators (Table 1):

60 Hz, 26 second opening. 50 Hz, 32 second opening.

Table 1. Standard V4062A,D Actuators.

Voltage

Frequency

Opening Holding

WVaWVa

53.0/42.7 105/80 20.0/17.2 33/29

72.01/52.5 160/110 18.4/16.2 28/24

Table 2. Fast-opening V4062A,D Actuators.

Voltage

Frequency

Opening Holding

WVa WVa

120V/60 Hz 59.5 129 19.0 28.0 220V/50 Hz 84.0 196 17.0 27.0 220V/50 Hz 82.0 180 16.5 26.4 220-240V

50/60 Hz 220-240V

50/60 Hz

a b

230V, 50 Hz power supply. 230V, 60 Hz power supply..

74.5 143.5 13.7 24.8

61.9 112 11.2 20.5

Fast-opening V4062B Actuators (Table 3):

60 Hz, 13 second opening. 50 Hz, 16 second opening.

Table 3. Fast-opening V4062B Actuators.

Voltage

Frequency

220-240V /50/60 Hz 220-240V /50/60 Hz

230V, 50 Hz power supply.

230V, 60 Hz power supply.

Opening Holding

WVaW Va

76.5 150.6 13.3 28.8

64.4 118.2 11 23.2

Pressure Ratings Of Valve-Actuator Combinations:

See Table 4.

Fast-opening V4062A,D Actuators (Table 2):

60 Hz, 13 second opening. 50 Hz, 16 second opening.

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or phone:

1. Your local Home and Building Control Sales Office (check white pages of your phone directory).

2. Home and Building Control Customer Logistics Honeywell Inc., 1885 Douglas Drive North Minneapolis, Minnesota 55422-4386 (612) 951-1000

In Canada—Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York, Ontario M2H 3N7. International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

60-2099—8 2

V4062A,B,D HI-LO-OFF FLUID POWER GAS VALVE ACTUATOR

Table 4. Pressure Ratings of Valve-Actuators Combinations.

V4062A,D Actuator

Differentialb Closeoff

Valve psi mbar psi bar psi mbar psi bar

V5055A,C; V5097A,C 3/4 to 3 in. 5 340 15 1 15 1000 15 1 V5055A,C 4 in. 3 200 15 1 5 340 15 1 V5055B, V5097B 3/4 to 3 in. 5 340 15 1 15 1000 15 1 V5055B 4 in. 3 200 15 1 5 340 15 1 V5055D,E 3/4, 1, 1-1/4, 1-1/2 in.;

5 340 75 5 25 1700 75 5

V5097D 3/4 in. to 2 in. V5055D,E; V5097D,E 2, 2-1/2, 3 in. 5 340 45 3 15 1000 45 3

Use a V4062D (with proof-of-closure switch) with a V5055/V5097C or E (with double seal) for valve seal overtravel interlock.

Maximum operating pressure differential.

Maximum closeoff pressure without seal leakage. this is the maximum allowable pressure drop to which a valve may be

subjected while fully closed, and is independent of the valve body rating.

V4062B Actuator

Auxiliary Switch And Proof-Of-Closure Switch Ratings:

See Table 5.

Table 5. Auxiliary Switch and Proof-of-Closure

Switch Ratings (1/2 hp [0.37 kW]

Load 120V 240V

Full Load 9.8A 4.9A Locked Rotor 58.8A 29.4A

Maximum total connected power to both switches (if used) is 1800 VA.

Mounting:

Mounts directly to V5055/V5097 Valve with two setscrews

positioned 90 degrees apart.

Valve and actuator can be mounted in any position

(multipoise).

NOTE: 220 to 240 Vac, 50/60 Hz models must be mounted

vertically.

Mounting Dimensions:

See Fig. 1.

Low-Fire Adjustment:

0.17 inch to 0.64 inch (with respect to V5055/V5097B Valve) valve stem tr a vel.

NOTE: The low-fire position of the V5055/V5097A,C,D and

E Valves differ from the V5055/V5097B. Check the valve flow curves and match the low-fire position to the burner design and valve application.

Nominal Opening Time:

Standard Models: 26 sec at 60 Hz; 32 sec at 50 Hz. Fast-opening Models: 13 sec at 60 Hz; 16 sec at 50 Hz.

Closing Time:

1 sec maximum

Damper Shaft:

3/8 in. sq (9.5 mm) for use with 7616BR Damper Crank

Arm (not included). Models available with or without damper shaft return spring.

Maximum Damper Shaft Rotation:

52 angular degrees.

Maximum Force:

At 2-11/16 in. (68.3 mm) radius for 7616BR Damper

Crank Arm (ordered separately).

NOTE: Damper shaft drives damper crank arm in one

direction only; optional return spring is available on damper shaft to turn damper crank arm in opposite direction. See Table 6.

Table 6. Actuator Torque (With and

Without Return Spring).

V4062 Model

Without return

-40°F to 20°F

(-40°C to -7°C)

lb N lb N

5 22.2 20 89.0

20°F to 150°F

(-70°C to 66°C)

spring With return spring 5 22.2 10 44.5

60-2099—83

+ 5 hidden pages