Honeywell V2270 PRODUCT DATA

V2270 F type Distribution Valve

LOCKSHIELD VALVE FOR DISTRIBUTION SYSTEMS

PRODUCT DATA

Internal thread

External thread

Design

The distribution valve consists of:

•Valve housing PN10, DN15

•with external threads, or

•with internal threads to DIN2999 (ISO7) for threaded pipe or copper/precision steel pipe 10...18 mm using compression pipe fittings (see ‘Accessories’)

•Pre-settable valve insert

•Protection cap

•Union-nut and radiator tailpiece

Materials

•Valve housing made of nickel-plated red bronze

•Valve insert made of brass with EPDM O-rings and soft seals

•Union-nut, tailpiece and cap made of nickel-plated brass

Application

By fitting the F type Distribution Valve, the flow proportion through each radiator on a oneor two-pipe distribution system can be set to the calculated value. Depending on application, the F type Distribution Valve is either fitted to every radiator (one-pipe system) or to every radiator except the last one (two-pipe system).

Individual radiators can be shutoff without influencing other radiators in the loop..

By using distribution valves connections under the floor or in the wall are avoided.

Features

•No connections under the floor necessary

•Shutoff does not affect other radiators in the loop

•Fine pre-setting, shutoff does not change the pre-setting

•Available with R 1/2" internal or G 3/4" external threads

Specifications

Medium	Heating water, water quality to
	VDI2035
pH-value	8...9.5
Operating temperature	2...130°C (36...266°F)
Operating pressure	max. 10 bar (145 psi)
kvs(cv)-values	1.5 (1.76)

Please Note:

•To avoid stone deposit and corrosion the composition of the medium should conform with VDI-Guideline 2035

•Additives have to be suitable for EPDM sealings

•System has to be flushed thoroughly before initial operation with all valves fully open

•Any complaints or costs resulting from non-compliance with above rules will not be accepted by Honeywell

•Please contact us if you should have any special requirements or needs

Honeywell y Subject to change

EN0H-2403GE25 R1206

V2270 F TYPE DISTRIBUTION VALVE

Dimensions and Ordering Information

Fig. 1. V2270X with external threads

Fig. 2. V2270Y with internal threads

NOTE: All dimensions in mm unless stated otherwise.

Table 1. Available versions and OS-Nos (OS=Ordering Specification)

Body type	DN	kvs-values	OS-No.
External threads	15	1.50	V2270X0015
Internal threads	15	1.50	V2270Y0015

Accessories

2 Connections for copper and soft steel pipe
3/4" x 10 mm	VA7200A010
3/4" x 12 mm	VA7200A012
3/4" x 14 mm	VA7200A014
3/4" x 15 mm	VA7200A015
3/4" x 16 mm	VA7200A016
3/4" x 18 mm	VA7200A018
2 External connections for plastic pipe
3/4" x 12 x 2 mm	VA7210A012
3/4" x 14 x 2 mm	VA7210A014
3/4" x 16 x 2 mm	VA7210A016
3/4" x 17 x 2 mm	VA7210A017
3/4" x 18 x 2 mm	VA7210A018

2 External connections for composite pipe, alpex-therm

3/4" x 14 x 2 mm	VA7220A014
3/4" x 16 x 2 mm	VA7220A016
3/4" x 18 x 2 mm	VA7220A018

Compression ring and nut with support insert (2 pcs each)

1/2" x 10 mm	VA621A15101
1/2" x 12 mm	VA621A1512
1/2" x 14 mm	VA621A15141
1/2" x 15 mm	VA621A1515
1/2" x 16 mm	VA621A1516
1/2" x 18 mm	VA621A15182

NOTE: Support inserts have to be used for copper or soft steel pipe with 1,0 mm wall thickness

NOTE: 1 without support inserts NOTE: 2 with 2 adapters

Pressure cap – for shutting off valves on radiator outlet

								for valve DN15	VA2202A015
Sealing ring for Pressure cap
								for valve DN15	VA5090A015

Floor cover for Ø15, 16 and 18 mm pipe

NOTE: Processing after technical documentation of the	white	VA2201B015
several companies

Automation and Control Solutions

Honeywell GmbH Hardhofweg

74821 Mosbach, Germany Phone: [phone] Fax: [phone] www.honeywell.com

EN0H-2403GE25 R1206 Dezember 2006

© 2006 Honeywell International Inc. Subject to change • All rights reserved

Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens,

Route du Bois 37, Switzerland or by its Authorized Representative.