Honeywell TE242ELW User Manual

Honeywell

Personal Weather Station

(TE242ELW)

INTRODUCTION 3 PRODUCT OVERVIEW 4 BEFORE YOU BEGIN 8

BATTERY INSTALLATION 9 LOW BATTERY WARN ING 10 GETTING STARTED 10 PLACEMENT OF THE UNITS 10 REMOTE AND INDOOR TEMPE RATURE 11 MAXIMUM AND MINIMUM READINGS 11 LOST COMM UNICATION 12 TRANSMISSIO N COLLISION 13 WWVB RAD IO CONTROLLED TIME 13 ATOMIC CLOCK 14 TIME AND CALENDAR DISPLAY MODES 14 MANUAL SETTINGS 15 CLOCK ALARMS 15 SNOOZE 17 BACKLIGHT 17 PRECAUTIONS 18 TROUBLESHOOTING 19 SPECIFICATIO NS 20 FCC STATEMENT 21 DECLARATION OF CONFORMITY 22 STANDARD WARRANTY INFORMATION 23

TABLE OF CONTE NTS

USER MANUAL

INTRODUCTION

Thank you for selecting the Honeywell Wireless Personal Weather Station. This

device combines precise time keeping with monitoring and displaying the

PRODUCT OVERVIEW MAIN UNIT

FEATURES

weather conditions from up to three remote locations.

In this package you will find:

· One main unit (receiver)

· One remote sensor (transmitter) TS15C

· One User Manual

Please keep this manual handy as you use your new item. It contains practical

step-by-step instructions, as well as technical specifications and precautions

you should know.

· New Double-Tool Design

· Time automatically sets to the US Atomic Clock

· 12 or 24 hours Time Format

· Dual crescendo Time Alarm with Snooze

· Day of the week displayed in English, Spanish, French, German and

Italian

· Long-Range Wireless Reception of the Temperature from the Remote

Sensor to the Main Unit from up to 200 feet (60 meters) away

· Multi-Channel Capability to Monitor Temperature in up to 3 Remote

Locations

· Minimum and maximum memory for indoor and remote temperature

· Indoor and Remote Temperature display

· Programmable Ice Warning Alarm

· Low Battery Indicators

· Enhanced Blue Backlight

FRONT/REAR VIEW

H F

A. WEATHER AND TIME IN EASY-TO READ DIGITS

B. SNOOZE/LIGHT button

· Stops the clock’s alarm temporarily

· Activates a backlight for 5 seconds

C. CHANNEL button

· Activates clock’s manual programming mode

F. DOWN ( ▼) button

· Decreases the parameters

· Activates manual remote channels search

· Disables time alarms (W) and (S) and Ice Warning Alarm

G. ALARM button

· Allows toggling between the calendar display and three time alarm

modes

· Allows programming available alarms

H. MEM button

· Toggles between current, minimum, maximum readings of the indoor

and remote temperature

· Clears the temperature memory

I. WALL- MOUNT RECESSED HOLE

· Keeps the unit on the wall

J. BATTERY COMPARTMENT

· Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries

K. REMOVABLE TABLE STAND

· Recalls a different remote sensor reading – 1,2 or 3

· Activates the remote channels search

D. UP ( ▲) button

· Increases the parameters

· Activates US Time Zone selection mode

· Activates manual search for atomic time signal

· Enables time alarms (W) and (S) and Ice Warning Alarm

E. MODE button

· Toggles between time modes - time with seconds and time with the

day of the week

· Holds unit in upright position on a flat surface

REMOTE SENSOR

FEATURES

· Keeps the remote sensor on the wall

F. °C/ °F SWITCH

· New double-tool design

· Remote temperature transmission to the main unit via 433 MHz

frequency

· Case can be wall mounted using built-in hanger

· Selection of the temperature display in Celsius or Fahrenheit

· Three channel selection

· LCD displays temperature, and channel

A. LED INDICATOR

· Flashes once when the remote sensor transmits a reading to the main

unit.

· Flashes twice when battery power is low.

B. BATTERY COMPARTMENT

· Holds two AAA-size batteries

C. RESET

· Resets all previous settings

D. CHANNEL SWITCH

· Selects the temperature display in Celsius or Fahrenheit

BEFORE YOU BEGIN

· We recommend using alkaline batteries for the remote sensor and

main unit when temperatures are above 32°F (0°C). We recommend

using lithium batteries for the remote sensor when temperatures are

below 32°F (0°C).

· Avoid using rechargeable batteries. (Rechargeable batteries cannot

maintain correct power requirements).

· ALWAYS install batteries in the remote sensor before the main unit.

· Insert batteries before first use, matching the polarity in the battery

compartment

· Press RESET after each battery change with a paper clip or similar

tool.

· Remove protective plastic screen from LCD display (if any).

· During an initial setup, place the main unit close to the remote sensor.

· After reception is established (the remote temperature will appear on

the main unit’s display), position the remote sensor and the main unit

within the effective transmission range of 200 feet (60 meters).

· The remote sensor can be placed indoors or outdoors, depending

on the area where the temperature is intended to be measured. If

you intend measuring outdoor elements, place remote sensor outdoors

· The main unit must be placed indoors.

NOTE:

· Selects the desired channel -1, 2 or 3

E. WALL-MOUNT RECESSED OPENING

1. Avoid pressing any buttons on the main unit before the remote readings

are displayed.

+ 8 hidden pages