Honeywell MAXPRO-NET User Manual
MAXPRO-Net
Crosspoint Matrix Video Switching System
Operator’s Manual
HMXMU001056 - March 2005 - Rev. A
ISSUE DATE REVISIONS
A March 2005 Initial Release (PCN1980)
Rev. A ii HMXMU001056
03/16/05
SOFTWARE LICENSE AGREEMENT
Honeywell International Inc.
.
You should carefully read the following terms and conditions. If you do not
consent to be bound by this License Agreement, you must promptly return
the unopened package to the person from whom you purchased it within
fifteen (15) days from date of purchase and your money will be refunded to
you by that person. If the person from whom you purchased this Software
fails to refund your money, contact HONEYWELL immediately at the
address shown above.
Important: This Software is security related. Access should be limited to
authorized individuals.
1. GRANT OF LICENSE. Subject to all terms and conditions hereof of
Honeywell International Inc. acting through its Security group ("HONEYWELL")
does hereby grant to the purchaser (the "Licensee") upon payment in full of the
published license fee, or other license fee agreed to in writing (the "License Fee")
a nontransferable, non exclusive license to use the enclosed software ("Licensed
Programs") provided herewith in Licensee's own business on a single computer
for a term commencing on the date of payment in full of the License Fee and
continuing in perpetuity unless terminated in accordance with the terms hereof.
2. PROPRIETARY RIGHTS. License hereby acknowledges that the Licensed
Programs including the algorithms contained therein are proprietary to
HONEYWELL. Licensee shall not sell, transfer, disclose, display or otherwise
make available any Licensed Programs or copies or portions thereof to any other
entity. Licensee agrees to secure and protect the Licensed Programs so as to
maintain the proprietary rights of HONEYWELL therein, including appropriate
instructions to and agreements with its employees.
3. DOCUMENTATION. The documentation supplied with the Licensed Programs
is the copyright property of HONEYWELL. Licensee shall not under any
circumstances divulge or permit to be divulged such documentation to any other
entity.
4. COPIES. Licensee shall not copy in whole or in part the Licensed Programs
or documentation provided however that Licensee shall be permitted to make
one (1) copy of the Licensed Programs solely for backup purposes provided that
all proprietary notices are reproduced thereon. Any such copy shall remain part
of the Licensed Programs and shall be subject to this agreement.
5. OBJECT CODE. Licensee understands and acknowledges that the Licensed
Programs consist of object code only and that HONEYWELL shall not supply
source code versions of the Licensed Programs. Licensee shall not create or
attempt to create by de-compilation or otherwise, the source code for the
Licensed Programs, or any part thereof.
6. SECURITY. Licensee acknowledges that the Licensed Programs are security
related and access to the Licensed Software should be limited to authorized
individuals. Licensee assumes full responsibility for use of the Licensed
Programs whether by authorized or unauthorized individuals. Licensee agrees
that the License Fee has been set in reliance upon the limitation on liability
contained herein and that such provisions are fair and not unconscionable.
HONEYWELL does not represent that the Licensed Programs may not be
compromised or circumvented, that the Licensed Programs will prevent any
personal injury or property loss by burglary, robbery, fire or otherwise, or that the
Licensed Programs will in all cases provide adequate warning or protection.
Licensee understands that a properly installed and maintained alarm may only
reduce the risk of burglary, robbery or fire without warning, but is not insurance or
a guarantee that such will not occur or that there will be no personal injury or
property loss as a result.
7. DISCLAIMER OF WARRANTIES. HONEYWELL does not warrant that the
Licensed Programs will meet your requirements, that operation of the Licensed
Programs will be uninterrupted or error-free, or that all Licensed Programs’ errors
will be corrected. The entire risk as to the quality and performance of the
Licensed Programs is with you. THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT ARE DISCLAIMED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY HONEYWELL, ITS EMPLOYEES,
DISTRIBUTORS, DEALERS, OR AGENTS SHALL INCREASE THE SCOPE OF
THE ABOVE WARRANTIES OR CREATE ANY NEW WARRANTIES. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. IN
THAT EVENT, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO
NINETY (90) DAYS FROM THE DATE OF DELIVERY OF THE LICENSED
PROGRAMS. This warranty gives you specific legal rights. You may have other
rights, which vary from state to state.
165 Eileen Way, Syosset, NY 11791
8. LIMITATION OF REMEDIES. Licensee's exclusive remedy shall be either the
replacement of any diskette or other media not meeting the limited warranty set
forth above and which is returned to HONEYWELL with a copy of Licensee's paid
invoice or, if HONEYWELL is unable to deliver a replacement that is free of
defects, Licensee may terminate this Agreement by returning the Licensed
Programs and thereupon the License Fee shall be refunded. HONEYWELL shall
have no obligation under this Agreement if the Licensed Programs are altered or
improperly repaired or serviced by anyone other than HONEYWELL factory
service. For warranty service, return Licensed Programs transportation prepaid,
to HONEYWELL Factory Service, 165 Eileen Way, Syosset, New York 11791.
9. LIMITATION OF LIABILITY. REGARDLESS OF WHETHER ANY REMEDY
SET FORTH IN THIS AGREEMENT FAILS OF ITS ESSENTIAL PURPOSE, IN
NO EVENT WILL HONEYWELL OR ITS SUPPLIERS BE LIABLE TO YOU FOR
ANY SPECIAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES,
INCLUDING ANY LOST PROFITS OR LOST DATA ARISING OUT OF THE
USE OR INABILITY TO USE THE LICENSED PROGRAMS OR ANY DATA
SUPPLIED THEREWITH EVEN IF HONEYWELL OR ANYONE ELSE HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY
CLAIM BY ANY OTHER PARTY. THIS PROVISION IS INCLUDED FOR THE
BENEFIT OF HONEYWELL AND ITS LOCAL REPRESENTATIVES, AND IS
ENFORCEABLE BY EACH OF THEM.
SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION
OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
IN NO CASE SHALL THE LIABILITY OF THE LICENSED PROGRAMS’
PROVIDERS OR OF HONEYWELL EXCEED THE PURCHASE PRICE PAID
FOR THE PRODUCT.
10. REGISTRATION. In order to qualify to receive notification of HONEYWELL
updates to the Licensed Programs, Licensee must complete and return a
Registration Form to HONEYWELL within twenty (20) days from date of
purchase. Notwithstanding, HONEYWELL is under no obligation to release
updates to the Licensed Programs.
11. TERMINATION. Upon the breach or non-compliance with any term or
provision of this agreement, HONEYWELL shall have the right to terminate the
license granted hereby by written notice to Licensee. Upon such termination
Licensee shall immediately turn over to HONEYWELL all copies of the Licensed
Programs and any documentation supplied in connection therewith. Such
remedy shall be in addition to and cumulative to any other remedies
HONEYWELL may have at law or in equity with respect to such breach or noncompliance.
12. GENERAL. This agreement is the complete and exclusive statement of the
understanding of the parties hereto with respect to the transaction contemplated
hereby and supersedes any and all prior proposals, understandings and
agreements. This Agreement may not be modified or altered except by a written
instrument signed by Licensee and an authorized representative of
HONEYWELL, its rights, duties or obligations under this Agreement to any
person or entity, in whole or in part. If any provision of this Agreement is invalid
under any applicable stature or rule of law it is to that shall be governed by the
laws of the State of New York and the sole venue for suit shall be in an
appropriate state or federal court located in the State and City of New York. The
failure of HONEYWELL to exercise in any respect any rights provided for herein
shall not be deemed a waiver of such right or any further Agreement may be
brought more than two (2) years after the date such cause of action shall have
arisen. HONEYWELL shall have the right to collect from Licensee any expensed
incurred including attorneys' fees in enforcing its right under this agreement.
Rev. A iii HMXMU001056
03/16/05
PATENT AND TRADEMARK INFORMATION
Portions of MAX-1000, its software, and its components are protected by one or more of
the following patents or trademarks.
Australian Patent 674652, 693914
US Patent 5923364, 5745166
British Patents GB2305061 B, GB2323739 B, GB2323740 B, GB2323741 B
Singaporean Patent 9700491-5
Australian Trademarks 679926, 679927, 679928, 679929, 679930, 679931
US Trademark 75/142790
Rev. A iv HMXMU001056
03/16/05
MAXPRO-Net TECHNICAL SUPPORT
REGISTRATION
License Key No:
Site name:..........................................................................................................................................................
Company:..........................................................................................................................................................
Contact person: .................................................. Position/title:...................................................................
Mailing Address: ...............................................................................................................................................
.............................................................................................................................................................................
.............................................................................................................................................................................
Phone:................................................................... Facsimile: ........................................................................
Technical Support Information
Honeywell provides technical support by phone to the installers and users of our various products. We
are happy to assist with installation (wiring, connections and system planning), commissioning
(identifying cabling or interconnection problems, macro programming, reconfigurations) as well as
ongoing service, fault finding and general maintenance advice.
Every licensed product receives technical support at no charge when the software has been licensed
through our technical support department. Call technical support at 972-620-6500 (1-800-796-2288 in
North America) to register your software via telephone or contact tech support at
MAXPRONETREGI@HONEYWELL.COM
Honeywell’s Technical Support Department located at 12880-A Valley Branch Lane, Farmers Branch, TX
75234.
to register via email. The form can be mailed to the
Other information
If you wish to minimize the requirement of technical support, Honeywell provides technical training
courses to allow our distributors and clients to further develop their own in depth knowledge and
understanding about our products. Please contact our company for more information at
www.honeywellvideo.com
I agree to abide by the terms and conditions as detailed in the software license agreement.
Please Sign/date and return to Honeywell Video Systems
_____________________________________ _______________________________
Signature Date
Rev. A v HMXMU001056
03/16/05
.
MAXPRO-Net TECHNICAL SUPPORT
"BEFORE YOU CONTACT TECHNICAL SUPPORT"
License Key No:
Before you call requesting technical support you should obtain the following information. This will save
you time and money and allow our support staff to attend to your difficulties promptly.
Have you registered the site?
As discussed on the registration form, you must have pre-registered your new MAXPRO-Net software
license PRIOR to requesting our technical support services. This should be done immediately to
activate you MAXPRO-Net software.
What is the License key number?
You will need to know the license number for the MAXPRO-Net system you are ringing about. The
license number is detailed at the top of this page as well as on the rear side of the SYSTEM floppy disk.
It can also be read from the title and registration page displayed within the system configuration editor
program, SETMAX.
You're now ready to contact technical support!
You are now ready to call technical support. Telephone: 972-620-6500; Toll Free North America: 1-800796-2288. Our staff may need to research your inquiry. This may require time outside of the original
phone call.
Rev. A vi HMXMU001056
03/16/05
TABLE OF CONTENTS
CHAPTER 1: OVERVIEW .......................................................................................................................1-1
1.1 GENERAL DESCRIPTION.......................................................................................................... 1-1
1.2 SYSTEM KEYBOARDS .............................................................................................................. 1-2
1.3 OTHER EQUIPMENT.................................................................................................................1-2
1.4 ASSUMPTIONS MADE BY THIS MANUAL................................................................................ 1-2
1.5 CONVENTIONS USED IN THIS MANUAL .................................................................................1-3
1.5.1 Keystrokes .................................................................................................................... 1-3
1.6.2 Numerical Range ..........................................................................................................1-3
1.6.3 Points to Take Note of .................................................................................................. 1-3
1.6.4 Monitor messages ........................................................................................................ 1-4
1.6 MANUFACTURER'S NOTE ........................................................................................................ 1-4
1.7 ACKNOWLEDGEMENTS........................................................................................................... 1-4
CHAPTER 2: GETTING STARTED......................................................................................................... 2-1
2.1 ENTERING YOUR SELECTION NUMBERS HOW AND WHY? ................................................. 2-1
2.2 SELECTING A MONITOR ..........................................................................................................2-2
2.3 SELECTING A CAMERA ............................................................................................................ 2-3
2.4 CONTROLLING A CAMERA PTZ............................................................................................... 2-4
2.4.1 Other PTZ functions...................................................................................................... 2-5
2.5 SELECTING A VCR.................................................................................................................... 2-6
2.6 CONTROLLING A VCR FROM THE KEYBOARD.......................................................................2-6
2.7 RECORDING A CAMERA...........................................................................................................2-8
2.8 AUXILIARY DEVICES AND MULTIPLEXERS ............................................................................. 2-9
CHAPTER 3: USING SCAN SEQUENCES ............................................................................................3-1
3.1 WHAT IS A SCAN SEQUENCE?................................................................................................ 3-1
3.1.1 What is a Guard Tour?.................................................................................................. 3-1
3.2 STARTING A SCAN SEQUENCE............................................................................................... 3-2
3.3 HALTING A SCAN SEQUENCE................................................................................................. 3-3
3.4 PAUSING A SCAN SEQUENCE ................................................................................................ 3-4
3.5 MAKING A NEW SCAN SEQUENCE......................................................................................... 3-5
3.6 EDITING A SCAN SEQUENCE.................................................................................................. 3-8
3.6.1 Overwrite With A New Camera Selection .....................................................................3-8
3.6.2 Delete This Camera Selection ......................................................................................3-9
3.6.3 Insert A New Camera Selection.................................................................................. 3-10
Rev. A vii HMXMU001056
03/16/05
TABLE OF CONTENTS, CONTINUED
3.7 CHANGING THE DWELL PERIOD........................................................................................... 3-11
3.8 INCREASING THE DWELL FOR ONE CAMERA ..................................................................... 3-13
CHAPTER 4: USING MACROS..............................................................................................................4-1
4.1 WHAT IS A MACRO? ................................................................................................................. 4-1
4.1.1 Salvo Camera Selections.............................................................................................4-1
4.1.2 Camera Walks............................................................................................................... 4-1
4.1.3 Automated Control .......................................................................................................4-2
4.2 EXECUTING A MACRO .............................................................................................................4-2
4.3 MAKE A NEW MACRO............................................................................................................... 4-3
4.4 CAN I EDIT A MACRO?..............................................................................................................4-5
CHAPTER 5: MANAGING ALARMS ......................................................................................................5-1
5.1 WHAT ARE ALARMS?................................................................................................................5-1
5.2 EXTERNAL ALARM INPUTS ...................................................................................................... 5-2
5.3 CAMERA FAIL ALARMS............................................................................................................. 5-2
5.3.1 Lost Video..................................................................................................................... 5-2
5.3.2 Low Level Video............................................................................................................ 5-2
5.4 PTZ SITE FAILED ALARMS........................................................................................................5-2
5.5 PTZ SITE TAMPER ALARMS ..................................................................................................... 5-3
5.6 VCR ALARMS............................................................................................................................. 5-3
5.7 OTHER DEVICE ALARMS.......................................................................................................... 5-3
5.8 THE ALARM STACK................................................................................................................... 5-3
5.9 STEPPING THROUGH THE ALARM STACK ............................................................................. 5-4
5.10 CLEARING AN ALARM .............................................................................................................5-4
CHAPTER 6: OTHER KEYBOARD FUNCTIONS................................................................................... 6-1
6.1 FAST CAMERA SELECTION .....................................................................................................6-1
6.2 SETTING A NEW CAMERA VIEW (PTZ PRESET POSITION) ................................................... 6-1
6.3 RECALLING A CAMERA VIEW (PTZ PRESET POSITION)........................................................ 6-3
6.4 CAMERA PTZ FLASHBACK.................................................................................................... 6-3
6.5 HIDING DISPLAYED TEXT......................................................................................................... 6-5
6.6 REVEALING SMARTEXT......................................................................................................... 6-5
Rev. A viii HMXMU001056
03/16/05
TABLE OF CONTENTS, CONTINUED
CHAPTER 7: THE TEXT CHANNEL MENU SYSTEM............................................................................ 7-1
7.1 WHAT IS THE TEXT CHANNEL MENU SYSTEM? ....................................................................7-1
7.1.1 Accessing the MENU SYSTEM..................................................................................... 7-1
7.1.2 Exiting the MENU SYSTEM ..........................................................................................7-1
7.2 MAKING SELECTIONS FROM THE MENU............................................................................... 7-2
7.3 SIGN-ON KEYBOARD OPERATORS......................................................................................... 7-3
7.4 SIGN-OFF KEYBOARD OPERATORS ....................................................................................... 7-4
7.5 CHANGE PIN NUMBER............................................................................................................. 7-5
CHAPTER 8: MESSAGE PROMPTS......................................................................................................8-1
8.1 INTRODUCTION ........................................................................................................................ 8-1
8.2 SELECTIONS............................................................................................................................. 8-1
8.3 SCAN ......................................................................................................................................... 8-3
8.4 PAN-TILT CONTROL.................................................................................................................. 8-5
8.5 VCR CONTROL.......................................................................................................................... 8-6
8.6 OTHER CONTROL..................................................................................................................... 8-7
8.7 USER MACROS .........................................................................................................................8-7
8.8 GENERAL ..................................................................................................................................8-8
8.9 ERRORS ....................................................................................................................................8-9
CHAPTER 9: SYSTEM FEATURES........................................................................................................ 9-1
9.1 REAL TIME CLOCK (RTC) .........................................................................................................9-1
9.2 MONITOR TEXT DISPLAY ......................................................................................................... 9-1
9.2.1 Post-Text.......................................................................................................................9-2
9.2.2 Pre-text.......................................................................................................................... 9-2
9.3 TEXT DISPLAY TIME-OUT ......................................................................................................... 9-2
9.4 MONITOR BLANKING................................................................................................................9-2
9.5 BLACK PAUSE........................................................................................................................... 9-2
9.6 MONITOR ACCESS ................................................................................................................... 9-3
9.7 SYSTEM ACCESS BY OPERATORS......................................................................................... 9-3
9.8 PRIORITIZING OPERATORS .....................................................................................................9-4
9.9 KEYBOARD TIME-OUT.............................................................................................................. 9-5
9.10 AUTO SIGN OFF........................................................................................................................ 9-5
9.11 CAMERA FAILED DETECTION.................................................................................................. 9-5
9.11.1 Lost video ..................................................................................................................... 9-5
9.11.2 Low level video .............................................................................................................9-6
Rev. A ix HMXMU001056
03/16/05
TABLE OF CONTENTS, CONTINUED
CHAPTER 10: TROUBLESHOOTING..................................................................................................10-1
10.1 SELECTING A CAMERA.......................................................................................................... 10-1
LIST OF TABLES
Table 3.1: Entry Positions In Scan Sequence 20......................................................................................3-7
Table 3.2: Entry Positions In Scan Sequence 20 Before Overwriting.......................................................3-8
Table 3.3: Entry Positions In Scan Sequence 20 After Overwriting..........................................................3-9
Table 3.4: Entry Positions In Scan Sequence 20 Before Deletion............................................................3-9
Table 3.5: Entry Positions In Scan Sequence 20 After Deletion...............................................................3-9
Table 3.6: Entry Positions In Scan Sequence 20 Before Insertion......................................................... 3-10
Table 3.7: Entry Positions In Scan Sequence 20 After Pressing The Key. ................................3-10
Table 3.8: Inserting Camera No 10 Into Entry Position 3. ......................................................................3-10
Table 3.9: The Scan Sequence List Showing Entry (0)..........................................................................3-11
Table 3.10: Using The Key To Move To Entry (0). .......................................................................3-12
Table 9.1: Settling Conflicts In Monitor Access ....................................................................................... 9-4
LIST OF FIGURES
Fig 7.1: Menu displayed on the Monitor Text Channel.............................................................................7-1
Fig 7.2: Keyboard Operator List................................................................................................................7-3
Fig 7.3: Enter PIN......................................................................................................................................7-3
Fig 7.2: Sign On Confirmed ......................................................................................................................7-4
Fig 7.4: Sign-Off Operator.........................................................................................................................7-4
Fig 7.15: Change PIN................................................................................................................................ 7-5
Fig 7.15: Enter new PIN number...............................................................................................................7-5
Fig 7.16: Confirm new PIN number, again................................................................................................7-6
Fig 7.17: New PIN number OK..................................................................................................................7-6
Rev. A x HMXMU001056
03/16/05
1.1 GENERAL DESCRIPTION
MAXPRO-Net combines custom designed software with a high performing Windows
2003 Server resulting in Honeywell's Turn Key Centralized Management Console Server.
MAXPRO-Net is designed for system configuration, system management and system
monitoring of Honeywell's crosspoint matrix video switchers.
Using a system keyboard, an operator can select various cameras for display on the
available video display monitors. Where cameras have pan/tilt/lens control, the operator
can move the camera remotely via the joystick and other keys on the system keyboard.
Digital video recorders, videocassette recorders, motion detectors, and other video
processing equipment can all be incorporated into the crosspoint matrix video switching
system and can be remotely controlled from the system keyboard. External alarm inputs
can be programmed to select cameras and operate the video system automatically.
Cameras can also be electronically monitored to verify valid video signal levels. In the
event of a camera failure, the system can automatically manage, respond to, and record
the failure.
CHAPTER 1:
OVERVIEW
External equipment to the matrix video switching system can also be controlled using
auxiliary control output circuits. For example, electric door latches or a boom-gate
control could all be available directly from the system keyboard. The MAXPRO-Net
Crosspoint Matrix Video Switching System has been designed to cater to a large variety
of applications, including your own specific system requirements.
Rev. A 1-1 HMXMU001056
03/16/05
1.2 SYSTEM KEYBOARDS
The system keyboard, along with text message information (available via the video
display monitors), is used by the operator to control the MAXPRO-Net Crosspoint Matrix
Video Switcher.
Depending on the size of the video system, there could be up to thirty-two (32)
keyboards connected to the system. They can all operate the system at the same time
and still be totally independent of each other. There are two types of keyboard available.
1. The HEGS5300 enhanced keyboard.
2. The HEGSA002 ULTRAKey keyboard.
Refer to the specific user manual for your controller.
1.3 OTHER EQUIPMENT
The MAXPRO-Net Crosspoint Matrix Switcher System incorporates a variety of subrack
equipment to perform video switching and control of the entire system. As the actual
elements of equipment used in each system can vary dramatically, it is impossible to
describe your system's exact configuration in this manual.
Your system probably contains:
• several Video Switching Modules,
• several Post-Text Inserter Modules,
• many fixed (non movable) cameras,
• several PTZ (movable) cameras with preset views,
• several VCR/DVR and PTZ control output modules,
• possibly PTZ and VCR/DVR Control Output Modules,
• external Alarm Input Modules,
• various subracks (containing modules), power supplies, and a server CPU,
• keyboards.
1.4 ASSUMPTIONS MADE BY THIS MANUAL
To discuss the operation of the MAXPRO-Net, we have assumed that your video system
has at least:
• 1 x keyboard, and
• post-text insertion on at least one video display monitor.
Rev. A 1-2 HMXMU001056
03/16/05
1.5 CONVENTIONS USED IN THIS MANUAL
During the course of this manual, icons and examples are used, wherever possible, to
help illustrate certain points.
1.5.1 Keystrokes
Actual keys, used on the keyboard to perform certain functions, will be represented in
our examples, by icons of the respective keys.
• for example,
• or
.. represents the 'Alarm Clear' key.
1.6.2 Numerical Range
The video system consists of numerous video input and output channels. As such, the
icon, Ù, within brackets, will be used to represent the permitted range for numerical
selection.
• for example, (01 Ù 99) represents the permitted numerical range as 01 to 99,
1.6.3 Points to Take Note of
Points that you should be aware of will be highlighted to you in the form of a box as
shown below.
NOTE: You should pay attention to points highlighted in
paragraphs like this.
There will be areas (control of cameras, monitors, and so on) in the video system that
are restricted to some operators. Such areas, although discussed in this manual, will be
preceded by the message:
.. represents the '0' key,
, Access denied to some operators
Rev. A 1-3 HMXMU001056
03/16/05
1.6.4 Monitor messages
Every monitor can display, in its text message window, the current time/date, camera
description and operator name. These parameters would be defined during the setting
up of the system's configuration.
In addition to these, other messages that report alarm conditions or system status will
also be displayed. These special messages will also appear in the text message
window, usually above the normal text messages mentioned earlier.
These special messages will be presented in this manual as the following icon:
1.6 MANUFACTURER'S NOTE
If you are experiencing any difficulties with your MAXPRO-Net Crosspoint Matrix Video
Switching System, or may have some useful information to relate back to us, kindly
contact your local distributor.
Our distributors are very carefully selected. They are provided with complete technical
support and training to ensure the highest possible standard of service.
1.7 ACKNOWLEDGEMENTS
• WINDOWS Registered trademark of the Microsoft Corporation
• SMARTEXT Trademark of Honeywell, Inc
• FLASHBACK Trademark of Honeywell, Inc
• MAXPRO SYSTEMS AND FACE LOGO Registered trademark of Honeywell
Rev. A 1-4 HMXMU001056
03/16/05
CHAPTER 2:
GETTING STARTED
2.1 ENTERING YOUR SELECTION NUMBERS HOW AND WHY?
For nearly all keyboard operations discussed in this manual, an associated numeric
entry must be made. For example, when selecting a camera or setting the dwell for a
scan sequence.
The required number is typed in, using the SELECTION PAD on the keyboard. When
the number entered is shorter in length than expected (that is, less digits than expected),
then the
An Example:
If the maximum Camera Number used on the system is, as an example, Camera 20, the
system would then always expect 2 digit camera numbers to be entered in selecting any
camera.
To select camera 19, the operator must press the following keys:
If you wish to select camera 1, the operator must press:
As an alternative:
key must be pressed to indicate that the number entered is complete.
will also select camera 1.
In this case, as the required number of digits was pressed, the
required.
When there are less than ten possible selections (that is, 0 Ù 9), a single digit is pressed
to make the selection.
Rev. A 2-1 HMXMU001056
03/16/05
key is not
2.2 SELECTING A MONITOR
NOTE: To change the current picture on a video display
monitor, a monitor must first be selected.
Press the
• for example,
• or
or more possible monitors to select from).
The monitor description text will now be replaced by the name of your keyboard, for
example:
key followed by the monitor number required.
.. selects monitor 3,
.. selects monitor 6 (for a system having ten
NOTE: As an operator, your own name may appear
instead. This depends on the System Configuration
used.
Rev. A 2-2 HMXMU001056
03/16/05
2.3 SELECTING A CAMERA
NOTE: A monitor must be selected first.
Press the
• for example,
• or
or more possible cameras).
The monitor should now be displaying the new camera selected. The camera
description text should also be displayed.
key followed by the number of the camera required.
.. selects camera 25,
.. selects camera 1 (for a system having ten
NOTE: It is possible that the camera selected is not
available. In such instances, a text message will be
displayed on the monitor to explain the problem. Refer to
Chapter 9, Monitor Messages, for more information on
the displayed messages.
Rev. A 2-3 HMXMU001056
03/16/05
2.4 CONTROLLING A CAMERA PTZ
To operate a camera PTZ site, the following must first be true.
• you must currently be selecting a monitor,
• the monitor must be displaying the desired camera,
• the desired camera must have PTZ equipment fitted.
Camera pan, tilt, focus, and zoom control functions are detailed below. They are the
same on both the RD-500 and RD-530 keyboards.
PAN LEFT .. by pushing (and holding) the joystick towards the
Left. Releasing the joystick will halt the pan function.
PAN RIGHT .. by pushing (and holding) the joystick towards the
Right. Releasing the joystick will halt the pan function.
TILT UP .. by pushing (and holding) the joystick towards the Up
mark. Releasing the joystick will halt the tilt function.
TILT DOWN .. by pushing (and holding) the joystick towards the
Down mark. Releasing the joystick will halt the tilt function.
NOTE: The Tilt Up and Down functions, may be reversed,
depending on your system's configuration.
If the MANUAL-IRIS or WASH/WIPE options are fitted to the camera PTZ site, then the
following PTZ functions can also be used:
Rev. A 2-4 HMXMU001056
03/16/05
2.4.1 Other PTZ functions
The following PTZ functions may be available as well provided the keyboard being used
supports the function. Refer to your specific keyboard user manual.
• ZOOM IN .. by pressing (and holding) the
will halt the Zoom function.
• ZOOM OUT .. by pressing (and holding) the
will halt the Zoom function.
• FOCUS FAR .. by pressing (and holding) the
will halt the Focus function.
• FOCUS NEAR .. by pressing (and holding) the
key will halt the Focus function.
• IRIS OPEN .. By pressing (and holding) the
will halt the manual-iris function.
• IRIS CLOSE .. by pressing and (holding) the
key halt the manual-iris function.
• WASH .. by pressing (and holding) the
will halt the wash function.
• WIPE .. by pressing (and holding) the
halt the wipe function.
key. Releasing the key
key. Releasing the key
key. Releasing the key
key. Releasing the
key. Releasing the key
key. Releasing the
key. Releasing the key
key. Releasing the key will
NOTE: With the proper equipment installed, PTZ sites
can have variable speed controls for the Pan/Tilt and
Focus/Zoom functions. When a PTZ function is selected
from the keyboard, you'll have 'half' speed for the first
second. After that, 'full' speed is attained. This allows
faster movement from one point to another. It also allows
greater precision when making minor adjustments for a
proper view.
Rev. A 2-5 HMXMU001056
03/16/05
2.5 SELECTING A VCR
NOTE: A monitor must be selected first.
Press the
• for example,
• or
The monitor should now be displaying the video from the output of the VCR selected.
The VCR description text should also be displayed on the monitor.
key, followed by the VCR number.
selects VCR 10,
selects VCR 4.
2.6 CONTROLLING A VCR FROM THE KEYBOARD
, Control of VCRs may be denied for some operators
The VCR control functions are listed below. They are the same for both keyboards.
To operate a VCR machine remotely from a keyboard, the following must first be true:
• a monitor must currently be selected,
• the monitor must be displaying the desired VCR machine,
• the desired VCR machine must have remote control capability fitted.
Once the above is true, the following keys on the CONTROL PAD of the keyboard can
be used:
.. to begin playback.
.. to cancel playback record rewind and fast forward.
Rev. A 2-6 HMXMU001056
03/16/05
2.6 CONTROLLING A VCR FROM THE KEYBOARD, CONTINUED
.. to rewind the tape.
.. to fast-forward the tape.
.. half speed play. For some VCR's this is shuttle mode.
.. to pause playback (still-frame).
.. to begin recording.
.. to eject the tape.
.. to temporarily hide the text display on the monitor. When VCRs with
SMARTEXT are played back, the concealed text can be displayed on the
monitor again.
NOTE: Some functions of the VCR may not be available
for your system.
Rev. A 2-7 HMXMU001056
03/16/05
2.7 RECORDING A CAMERA
To record a camera onto a VCR:
• you must first select a monitor,
• then the required VCR must be selected onto the monitor,
Next press the
appears on the monitor. Now, make your camera selection, exactly as if you were
selecting the camera directly on the monitor.
• for example,
as the video source for the current VCR.
• or
video source for the current VCR.
key. The prompt:
.. selects camera 15
.. selects camera 3 as the
Now that the new video source has been selected by the VCR, you can control the VCR:
Record function, text function, and so on.
Rev. A 2-8 HMXMU001056
03/16/05
2.8 AUXILIARY DEVICES AND MULTIPLEXERS
Various other types of devices such as video multiplexers, or motion detectors and video
printers can also be selected.
To select a device;
• a monitor must first be selected;.
Press the desired device type key followed by the number of the device required.
• for example,
(5),
• or
The monitor should now be displaying the video from the output of the device selected.
The device description text should also be displayed on the monitor.
.. selects an auxiliary device number (10).
.. selects the multiplexer device number
Rev. A 2-9 HMXMU001056
03/16/05
NOTES:
Rev. A 2-10 HMXMU001056
03/16/05
Loading...