Honeywell LED310 Instruction Manual

FEATURES

SET UP – BEFORE USE

IMPORTANT SAFETY NOTES

IMPORTANT SAFETY NOTES (CONTINUED)

INSTRUCTION MANUAL

Rechargeable LED Spotlight

Model: LED310

•

•

•

•

•

•

•

•

WARNING--READ AND SAVE THESE OPERATING AND SAFETY
INSTRUCTIONS BEFORE USING THIS PRODUCT.

The user of electrical products may create hazards that include,
but are not limited to injury, fire, electrical shock. These
instructions are intended to provide you with important
information. When using electrical products, basic precautions
should always be followed to reduce risk of hazards.

WARNING: Read all instructions before using this product.

WARNING: The LED Spotlight is extremely bright and can cause

serious damage to eyesight. NEVER look directly at the LED
Spotlight and NEVER point the LED Spotlight into the face or eyes
of another person or animal.

WARNING: To reduce the risk of electric shock, unplug the LED
Spotlight from the AC electrical socket before attempting any
cleaning.

WARNING: : DO NOT allow children to handle or operate the LED
Spotlight.

WARNING: DO NOT attempt to charge or operate this product if
the AC/DC Power Adapter, 12V DC Car Power Adapter,
Rechargeable Battery, Cords or any part of the LED Spotlight is
damaged or corroded.

WARNING: DO NOT store, charge or operate in close proximity to
combustible or flammable materials.

WARNING: Store at room temperature or cool temperatures. DO
NOT store in a room with very hot temperatures, or under direct
sunlight.

WARNING: Store idle LED Spotlight indoors when not in use.
Store in a place that is out of reach of children.

WARNING: The LED Spotlight is Splash Resistant - resists the
occasional rain/ water droplet. DO NOT immerse the LED
Spotlight in water or any liquid.

WARNING: When charging the LED Spotlight from your car, or
when using your car in general, beware of the exhaust fumes
from your car. Do not switch on the car engine in a garage or

enclosed area and make sure there is good ventilation inside the
car while car is switched on. Avoid idling the car engine for
prolonged periods with people inside the car.

200 Lumens LED Spotlight
3-hour runtime (after fully charged)
2-Position Adjustable Handle
4-Position Adjustable Stand
Light-weight
AC rechargeable
12V DC Car Power Adapter
Splash Resistant

Battery Charging

Charge the Rechargeable LED Spotlight before use. There are two
methods of charging, using the included AC/DC Power Adapter or
12V DC Car Power Adapter.

Charging the Battery Using the AC/DC Power Adapter

Locate the DC Jack on the LED Spotlight and remove the Plastic
Protector Cap to reveal the DC Jack.

Insert the AC/DC Power Adapter into the DC Jack of the LED
Spotlight.

Plug the other end of the AC/DC Power Adapter into an AC
electrical socket.

The Red LED Indicator Light will switch on, indicating that the
battery is being charged. This Red Indicator Light will remain on
for as long as the LED Spotlight is plugged into the AC electrical
socket.

IMPORTANT: The Rechargeable LED Spotlight will not switch on
when the red indicator light is switched on or when the battery is
being charged.

Allow the battery to fully charge for at least 15 hours.

Unplug the AC/DC Power Adapter from the AC electrical socket
and the LED Spotlight after 15 hours of recharging.

Replace the Plastic Protector Cap when charging is complete and
the AC/DC Power Adapter is unplugged.

The Rechargeable LED Spotlight is now ready for use.

IMPORTANT: The lead acid rechargeable battery can lose charge
when the Rechargeable LED Spotlight is not used or recharged for
a long period of time. The rechargeable battery should be
recharged every 3 months for 15 hours to ensure the battery does
not completely lose charge.

Charging the Battery Using the 12V DC Car Power Adapter

The 12V DC Car Power Adapter should only be used to charge the
LED Spotlight when the car is in use (E.g. while driving). It takes
up to 15 hours to fully charge the LED Spotlight battery. If the car

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

1.

2.

3.

4.

5.

6.

7.

8.

AC/DC Power

Adapter

(Plug into AC

electrical socket)

AC/DC Power Adapter

(Plug in DC Jack)

DC Jack

(with Plastic

Protector Cap)

Red LED

Indicator Light

SET UP – BEFORE USE (CONTINUED) OPERATION

1: LED Spotlight

Position the LED Spotlight to shine in a position convenient for
your use. Follow the instructions in Operation #2 of this
instruction manual for mounting and handling options.

Locate the ON/OFF Switch on the side of the LED Spotlight. Press
the button to the “I” position to turn ON the LED Spotlight. Return
the switch to the “O” position to turn OFF the LED Spotlight

The LED Spotlight can shine for up to 3 hours (when the battery is
fully charged)

WARNING: THE LED SPOTLIGHT IS EXTREMELY BRIGHT AND
CAN CAUSE SERIOUS DAMAGE TO EYESIGHT. NEVER LOOK
DIRECTLY AT THE LED SPOTLIGHT AND NEVER POINT THE LED
SPOTLIGHT INTO THE FACE OR EYES OF OTHER PEOPLE OR
ANIMALS.

2: Mounting & Positioning The Rechargeable LED Spotlight

Two-Position Adjustable Handle

Depress the Handle Button to adjust the position of the handle in
a horizontal or vertical position. Release the Handle Button to lock
the handle in place.

Four-Angle Adjustable Stand

Adjusting the stand conveniently positions the LED Spotlight to
shine at different angles over your work area – Hands-free. Pull
the adjustable Stand from back to front to adjust the angle of the
Spotlight when needed.

1.1

1.2

1.3

2.1

2.2

will not be in use for 15 hours, it is possible to extend the LED
Spotlight battery power by charging for a few hours only (2 hours
of charging provides approximately 20~30 minutes runtime for
the LED Spotlight).

Insert the 12V DC Car Power Adapter into the DC Jack of the LED
Spotlight.

Plug the other end of the 12V DC Car Power Adapter into the 12V
DC power socket inside your car.

IMPORTANT: The Rechargeable LED Spotlight will not switch on
when the red indicator light is switched on or when the battery is
being charged.

Allow the battery to charge while car is in use.

Unplug the 12V DC Car Power Adapter from the car power socket
and the LED Spotlight when car is switched off.

Replace the Plastic Protector Cap when charging is complete and
the 12V DC Car Power Adapter is unplugged

The Rechargeable LED Spotlight is now ready for use.

IMPORTANT: Charging the LED Spotlight using the 12V DC Car
Power Adapter inside the car can drain the car battery if the car
engine is not running. Unplug the 12V DC Car Power Adapter from
the power socket inside the car, when the car engine is switched
OFF and the car is not in use.

IMPORTANT: Some models of cars will cut power to the 12V DC
car power socket when the car is switched off. When there is not
power to the 12V DC car power socket, then the Rechargeable
LED Spotlight will not charge.

WARNING: When charging the LED Spotlight from your car, or
when using your car in general, beware of the exhaust fumes
from your car. Do not switch on the car engine in a garage or
enclosed area and make sure there is good ventilation inside the
car while car is switched on. Avoid idling the car engine for
prolonged periods with people inside the car.

1.

2.

3.

4.

5.

6.

DC Jack

(with Plastic

Protector Cap)

12V DC Car

Power Adapter

(Plug into 12V DC

power socket)

AC/DC Power Adapter

(Plug in DC Jack)

Red LED

Indicator Light

Press Handle Button to
adjust handle position

LED Spotlight

ON/OFF Switch

(“I” / “O” )

Handle Button

Hanging Hole

Hanging Hole

Four-Angle

Adjustable Stand

OPERATION (CONTINUED)

Hanging Holes

There are 2 built-in Hanging Holes that offer the options of
hanging the LED Spotlight in a horizontal or vertical position.
Convenient for when you need to use the LED Spotlight
hands-free, or when mounting the light at a height above your
work area. Simply use string or hooks that can be inserted
through the built-in Hanging Holes, to hang the LED Spotlight in
place.

2.3