Honeywell IQ Force Data sheet
IQ Force SPECIFICATIONS
Four-Gas Detector
Housing
Weight 12.8 oz (363 g) without pump; 16.3 oz (463 g) with pump
Detector Dimensions 4.7 x 3.3 x 2.6 in. / 12 x 8.3 x 6.5 cm
Detector with Pump Dimensions 6.3 x 3.3 x 2.6 in. / 16 x 8.3 x 6.5 cm
Environmental Ratings
Temperature Normal Operating: 0º to 110ºF (-18º to 43ºC)
Storage (ideal): 50º to 80ºF (10º to 26ºC)
Humidity 20% to 90% RH continuous, 0% to 95% RH intermittent
Detector IP65/67
Pump IP65; 50 ft. (15m) maximum tubing length
Approvals
UL Class I, Division 1, Groups A B C D, T4
UL Class II, Division 1, Groups F G
ATEX Ex d ia IIC T4
IECEX Ex ia IIC T4 Gb
CSA Class I Div 1, Groups A B C D, T4
CSA C22.2 No. 152
Capabilities
Datalogger 41 hours @ 1 minute intervals (default)
Eventlogger Can store up to 200 events
Durability Detector withstands a drop from 6 ft. (1.8 m) onto concrete
IQ Management System Fully compatible. Supports alarm event email, person and location assignment functions
Misc. Able to be docked with or without pump attached
Alarms
Alarm Types High, Low, TWA, STEL, Custom
Visual Bright red LED on top of unit; yellow LCD backlight for low alarm; red LCD backlight for high alarm
Audible Multi-tone, 95 dB @ 1 ft. (30cm)
Vibrating Vibrating alarm standard
Battery
Type Lithium Ion
Run Time Continuous @ 68ºF (20ºC) without pump: 22 hours; with pump: 14 hours
Continuous @ -4ºF (-20ºC) without pump: 13 hours; with pump: 2½ hours
Recharge time 8 hours
Gas Detection Information
Available Sensors O2, %LEL, CO, H2S, Duo-Tox Dual-Channel (CO/H2S), CO-H (hydrogen resistant CO sensor)
Number of Gas Chambers Three sensor capability and four gas capability when using a Duo-Tox (CO/H2S) sensor
Warranty
2 years (monitor), 1 to 2 years sensors, depending on type
Find out more
Toll-free: 800.663.4164
SS01157_v1 11/12
© 2012 Honeywell Analytics
IQ Force Sensor Information
Sensor Range Resolution
Combustible Gas (LEL) 0-99% LEL, 0-5% CH
Oxygen (O2) 0-30% by Volume 0.1%
Carbon Monoxide (CO)
Carbon Monoxide, H
Hydrogen Sulfide (H
Duo-Tox Dual-Channel (CO/H
(Provide specific readouts for CO and H2S)
resistant (CO-H)
2
S) 0-100 ppm 0.1 or 1 ppm
2
S)
2
0-999 ppm 1 ppm
CO: 0-999 ppm
H2S: 0-100 ppm
4
1% LEL, 0.05% CH
1 ppm
0.1 or 1 ppm
4
Loading...