Honeywell IPCAM-PT, IPCAM-WI User Manual

TToottaall CCoonnnneecctt OOnnlliinnee HHeellpp GGuuiiddee ffoorr::

P

iiP

POWER

NETWORK

Caa

C

meerraass

m

iPCAM-WI Camera

800-02577-iPcams 2/10 Rev. A

iPCAM-PT Pan and Tilt Camera

iP Cameras Online Help Guide

This guide covers the operation of Honeywell's iP Cameras for use with the Total Connect website. The various cameras
each have different features that can be controlled from the Total Connect website. When a particular camera is
selected, only the operating switches for that model camera will appear. Refer to the topics at the end of this
guide for details on the tool buttons and how to set your preferences for each camera. The table below highlights the
features of each internet camera model:

1

POWER

NETWORK

Camera Features

iPCAM-WI Camera

• Wired or Wireless

• Fixed Lens

• Video Motion Detection

iPCAM-PT Camera

• Wired or Wireless

• Fixed Lens

• Video Motion Detection

After logging into Total Connect, click Video.

• Pan and Tilt with presets

• Aux Lighting

Note: After approximately
30-minutes of inactivity, the
Video session will time out
and disconnect.

2

From the drop-down menu, choose the video system you want to view. Click Launch Video System.

If your PC does not have QuickTime® and Flash® You will be prompted to install or update these
applications.

– 1 –