Honeywell HTX-3000 Instruction Manual

ScanDome ll™ KEYBOARD CONTROLLER

`

Please read this manual thoroughly before use and keep it handy for future reference.

Rev.2 04/10/05

Instruction Manual

HTX-3000

HTX-3000

2

WARNING AND CAUTION

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR
OTHER OPENINGS ON THE EQUIPMENT.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instruction in the literature

WARNING

CAUTION

accompanying the product.

3

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO
PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN
THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL
AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE
USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN
EXPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME
NMB-003 DU CANADA.

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER
MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

4

IMPORTANT SAFEGUARDS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that product heat.

9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for
long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.

14. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE
RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

15. Use Certified/Listed Class 2 power supply transformer only.

16. Warranty does not cover the product damages caused by installation
carelessness or natural disaster such as lighting.

5

Table of Contents

Chapter 1.0 INTRODUCTION

1.1 Features ---------------------------------------------------------------------- 6

1.2 Unpacking ---------------------------------------------------------------------- 7

Chapter 2.0 INSTALLATION

2.1 Connection Diagram --------------------------------------------------------- 8

2.2 Termination & Dip Switch Setting ---------------------------------------- 12

2.3 Keyboard Setup -------------------------------------------------------------- 13

2.4 Master & Slave Keyboard Setting --------------------------------------- 15

Chapter 3.0 OPERATION

3.1 Keyboard Lock/Unlock ----------------------------------------------------- 16

3.2 Controlling Multiplexer ----------------------------------------------------- 16

3.3 Summary of Keyboard Control ------------------------------------------ 18
Appendix A Trouble Shooting ------------------------------------------------- 21
Appendix B SPECIFICATION ------------------------------------------------- 22

6

Chapter 1

INTRODUCITON

1.1 Features

This keyboard controller is capable to control 32 ScanDomeII™ dome cameras and remote control
functions for variety of external switching devices like Multiplexer(max 255) etc…

The keyboard controller features:

• The capability of control a camera’s panning and tilting movement with variable speed from 0.5 °/sec
to 90°/sec as well as its zoom, focus, and iris command. Normal speed is inversely proportional to
the current zoom ratio. Turbo speed is Max 380°/sec when Ctrl key pressed.

• The ability to define and recall up to 240 presets, which are immediate camera call-ups of preset
position view, with automatic zoom and focus.

• The ability to define and run up to 8 patterns, which comprise a sequential series of pan, tilt, zoom,
and focus movements from a single camera.

• The ability to define and run up to 8 scans, which scan between two limits.

• The capability to incorporate up to 300 of the presets, patterns, scan and tour itself in up to 8 tours,

where the presets, patterns and scan automatically displayed one after the other on the Main monitor.

• Global preset recalls preset of all dome cameras.

• Auto Iris mode activated by moving the joystick slightly.

• Auto Focus mode is activated by twisting the zoom handle slightly.

• Programmable user preferences (alarm, preset, title, etc.).

• Administrator and user, two levels of password are supported for higher security.

• One Master and slave Keyboard is supported to control in a distant place.

• Multiplexers (Max 255) can be controlled remotely.

• Up to two programmed data from domes can be downloaded to none volatile memory space in KBD,

and uploads to a new dome.

Slave Keyboard

<Flashing Light>

UP TO 32 CAMERA

J-box

J-box

Master Keyboard

UP TO 255 MULTIPLEXER

<Sensor>

<Siren>

UP TO 4

Output

Alarm

UP TO 8

Alarm Input

Figure 1 – Typical system Configuration

7

1.2 Unpacking

Unpack the equipment and make sure all listed items are included in the box.

Contents of Keyboard box
Keyboard controller ------------------------------- 1
Junction box --------------------------------------- 1
3m cable -------------------------------------------- 2
M4 Self tapping screws ------------------------- 4
Instruction manual --------------------------------- 1
12VDC SMPS & Power Cord ------------------- 1