Premium Vandal
Dome Camera
NTSC / PAL
HD28C4HR6 HD28C4HR6X
HD28C4HR9 HD28C4HR9X
HD28W4HR6 HD28W4HR6X
HD28W4HR9 HD28W4HR9X
HD28D4HR6 HD28D4HR6X
HD28D4HR9 HD28D4HR9X
Installation Guide
Document 900.0275 – 10/05 – Rev 1.01
Revisions
Issue Date Revisions
1.00 09/05 New document.
1.01 10/05 Changed HD28R to HD28 throughout,
removed utp & fiber termination boards
updated back cover.
Rev 1.01 ii Document 900.0275
10/05
Warnings
Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
WARNING! The use of CSA Certified/UL Listed Class 2 power adapters
is required to ensure compliance with electrical safety
standards.
WEEE (Waste Electrical and Electronic Equipment). Correct disposal
of this product (applicable in the European Union and other European
countries with separate collection systems). This product should be
disposed of, at the end of its useful life, as per applicable local laws,
regulations, and procedures.
Explanation of Graphical Symbols
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
Rev 1.01 iii Document 900.0275
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
10/05
FCC Compliance Statement
Information to the User: This equipment has been tested and found to comply
with the limits for a Class A digital device. Pursuant to Part 15 of the FCC Rules,
these limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
Caution Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à norme NMB-003 du
Canada.
Manufacturer’s Declaration of Conformance
The manufacturer declares that the equipment supplied with this guide is
compliant with the essential protection requirements of the EMC directive 89/336/
EEC and the Low Voltage Directive LVD 73/23 EEC, conforming to the
requirements of standards EN 55022 for emissions.
Rev 1.01 iv Document 900.0275
10/05
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Unpack Everything . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Equipment Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Mounting the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Preparing the Mounting Surface. . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing the Conduit Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Wiring Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Connecting the Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Adjusting the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Dip Switch Functions (Color Cameras, Including TDN Models) .6
Adjustment Method (Color Cameras) . . . . . . . . . . . . . . . . . . . . .7
White Balance Adjustment Method (Color Cameras) . . . . . . . . .7
Manually Setting Shutter Speed (Color Cameras) . . . . . . . . . . .8
Dip switch functions (WDR cameras) . . . . . . . . . . . . . . . . . . . . . 9
Adjustment method (Wide Dynamic Range Cameras) . . . . . . . .9
Adjusting the Line Lock (Vertical Phase) for 24 VAC Operation 10
Adjusting the Backlight Compensation . . . . . . . . . . . . . . . . . . .10
Securing the Enclosure Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Warranty and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cable Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Rev 1.01 Document 900.0275
10/05
Introduction
The HD28 Series is Honeywell’s premium line of vandal-resistant, fully-integrated
CCTV cameras. The HD28 series enclosure is designed for easy installation and
setup.
Before You Begin
Please read this guide carefully
before you install the HD28
series camera. Keep this guide
for future reference.
Unpack Everything
Check that the items received match those listed on the order form and packing
slip. The HD28 series packing box should include, in addition to this User Guide
• One HD28 series camera
• One hardware kit
• One mounting template
• One product warranty
If any parts are missing or damaged, contact the dealer you purchased the
camera from or call Honeywell Customer Service (see “Warranty and Service” on
page 12).
Equipment Required
You will require the following tools to complete the installation:
• Phillips screwdriver
• Mounting screws. Use mounting screws appropriate to your installation
(capable of holding at least twice the weight of the camera).
Rev 1.01 1 Document 900.0275
10/05