Honeywell HD28W4HR6, HD28D4HR9X, HD28D4HR6X, HD28D4HR9, HD28C4HR9X User Manual

...
0 (0)

Premium Vandal

Dome Camera

NTSC / PAL

HD28C4HR6 HD28C4HR6X

HD28C4HR9 HD28C4HR9X

HD28W4HR6 HD28W4HR6X

HD28W4HR9 HD28W4HR9X

HD28D4HR6 HD28D4HR6X

HD28D4HR9 HD28D4HR9X

Installation Guide

Document 900.0275 – 10/05 – Rev 1.01

Revisions

Issue

Date

Revisions

 

 

 

1.00

09/05

New document.

 

 

 

1.01

10/05

Changed HD28R to HD28 throughout,

 

 

removed utp & fiber termination boards

 

 

updated back cover.

 

 

 

 

 

 

 

 

 

 

 

 

Rev 1.01

ii

Document 900.0275

 

 

10/05

Honeywell HD28W4HR6, HD28D4HR9X, HD28D4HR6X, HD28D4HR9, HD28C4HR9X User Manual

Warnings

Installation and servicing should be performed only by qualified and experienced technicians to conform to all local codes and to maintain your warranty.

WARNING! The use of CSA Certified/UL Listed Class 2 power adapters is required to ensure compliance with electrical safety standards.

WEEE (Waste Electrical and Electronic Equipment). Correct disposal of this product (applicable in the European Union and other European countries with separate collection systems). This product should be disposed of, at the end of its useful life, as per applicable local laws, regulations, and procedures.

Explanation of Graphical Symbols

 

 

 

 

 

THIS SYMBOL INDICATES THAT

 

CAUTION

 

 

 

 

 

 

 

 

DANGEROUS VOLTAGE

 

RISK OF ELECTRIC

 

 

 

CONSTITUTING A RISK OF

 

SHOCK

 

 

 

 

 

 

 

ELECTRIC SHOCK IS PRESENT

 

DO NOT OPEN

 

 

 

 

 

 

 

WITHIN THE UNIT.

 

 

 

 

 

 

 

 

 

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC

 

THIS SYMBOL INDICATES THAT

SHOCK, DO NOT REMOVE THE COVER.

 

IMPORTANT OPERATING AND

NO USER-SERVICEABLE PARTS INSIDE

 

MAINTENANCE INSTRUCTIONS

REFER SERVICING TO QUALIFIED

 

ACCOMPANY THIS UNIT.

 

SERVICE PERSONNEL

 

 

 

 

 

 

 

 

Rev 1.01

iii

Document 900.0275

 

 

10/05

FCC Compliance Statement

Information to the User: This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe A est conforme à norme NMB-003 du Canada.

Manufacturer’s Declaration of Conformance

The manufacturer declares that the equipment supplied with this guide is compliant with the essential protection requirements of the EMC directive 89/336/ EEC and the Low Voltage Directive LVD 73/23 EEC, conforming to the requirements of standards EN 55022 for emissions.

Rev 1.01

iv

Document 900.0275

 

 

10/05

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Unpack Everything . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Equipment Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Mounting the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Preparing the Mounting Surface. . . . . . . . . . . . . . . . . . . . . . . . . 2 Installing the Conduit Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Wiring Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Connecting the Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Adjusting the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Dip Switch Functions (Color Cameras, Including TDN Models) .6 Adjustment Method (Color Cameras) . . . . . . . . . . . . . . . . . . . . .7 White Balance Adjustment Method (Color Cameras) . . . . . . . . .7 Manually Setting Shutter Speed (Color Cameras) . . . . . . . . . . .8 Dip switch functions (WDR cameras) . . . . . . . . . . . . . . . . . . . . . 9 Adjustment method (Wide Dynamic Range Cameras) . . . . . . . .9 Adjusting the Line Lock (Vertical Phase) for 24 VAC Operation 10 Adjusting the Backlight Compensation . . . . . . . . . . . . . . . . . . .10

Securing the Enclosure Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Warranty and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Cable Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Rev 1.01

Document 900.0275

 

10/05

Introduction

The HD28 Series is Honeywell’s premium line of vandal-resistant, fully-integrated CCTV cameras. The HD28 series enclosure is designed for easy installation and setup.

Before You Begin

Please read this guide carefully before you install the HD28 series camera. Keep this guide for future reference.

Unpack Everything

Check that the items received match those listed on the order form and packing slip. The HD28 series packing box should include, in addition to this User Guide

One HD28 series camera

One hardware kit

One mounting template

One product warranty

If any parts are missing or damaged, contact the dealer you purchased the camera from or call Honeywell Customer Service (see “Warranty and Service” on page 12).

Equipment Required

You will require the following tools to complete the installation:

Phillips screwdriver

Mounting screws. Use mounting screws appropriate to your installation (capable of holding at least twice the weight of the camera).

Rev 1.01

1

Document 900.0275

 

 

10/05

Loading...
+ 14 hidden pages