Honeywell Y6630D1007, HCW 80, HC60NG User Manual
Wireless Room Thermostat
Installation and Operation
Y6630D1007
General safety instructions
Contents
1. General safety instructions.................................... 3
1.1. Commissioning the relay module HC60NG........... 3
2. Overview ............................................................... 4
2.1. Pre configured kit Y6630D1007............................. 4
2.2. Single provided devices......................................... 4
3. Installation ............................................................. 4
3.1. Installation relay module HC60NG ........................ 4
3.2. Installation room unit HCW 80............................... 6
4. Checking ...............................................................7
4.1. System check........................................................ 7
4.2. Radio transmission check......................................7
5. Teach-in (single devices only) ............................... 7
5.1. Assignment to the relay module HC60NG............. 7
5.2. Failed teach-in....................................................... 7
6. Communication loss.............................................. 7
7. Factory reset of relay module HC60NG................. 7
8. Particular features of the room unit HCW 80......... 8
8.1. Operation............................................................... 8
8.2. Limiting the adjustment range ............................... 8
8.3. Fixed control parameters....................................... 8
9. Changing batteries ................................................ 8
10. Appendix ............................................................... 9
10.1. Help with problems................................................ 9
10.2. Specifications HCW 80.......................................... 9
10.3. Specifications HC60NG......................................... 9
10.4. Device and function definition in accordance
with EN 60730-1.................................................... 9
10.5. WEEE directive 2002/96/EC – Waste Electrical
and Electronic Equipment directive ....................... 9
1. General safety
instructions
1.1. Commissioning the relay module
HC60NG
Danger
WARNING
WARNING
WARNING
Danger to life through electric
shock!
Contacts that are open are live.
► Ensure that the device is de-
energised.
► Have all the work carried out by
authorised qualified personnel.
► Observe the valid local regulations
during the installation.
Insufficient data transfer!
Interference of the relay module
HC60NG in the device through metallic
objects or further frequency devices.
► Mount the device with a distance of at
least 30 cm to metallic objects such
as wall boxes or boiler housings
according to the DECT standard, etc.
► Do not mount on metal wall boxes.
Damage to the device!
Short-circuiting through humidity and
moisture.
► Mount the device at a site that is
protected against humidity and
moisture.
Damage to exposed components!
Destruction of the electronic
components through electrostatic
discharges.
► Do not touch the components.
► Touch an earthed piece of metal to
discharge static electricity from your
body.
3
Overview
2. Overview
The room unit HCW 80 is used for intelligent room
temperature control in combination with the relay module
HC60NG. It can be used to control gas and oil boilers, a
variety of valves and actuators or electrical heating systems.
No wiring to the room unit HCW 80 is required.
Because of the simple HCW 80 analogue user interface with
absolute set point temperature scale the room set point
temperature can be easily adjusted.
The room unit and the relay module provide reliable RF
communication technology on 868 MHz frequency.
The HCW 80 and HC60NG are already teachedin (bounded). They are provided as pre
configured kit for fast installation (plug and play).
Zone 1
Wireless Room Thermostat
HCW80
Example radiator control
3. Installation
3.1. Installation relay module HC60NG
Fig. 2: Positioning the relay module HC60NG
► Follow the installation diagrams to install and connect the
power supply to the relay module HC60NG.
1
1
Relay module
HC60NG
Boiler
Fig. 1: Application of the wireless room thermostat
2.1. Pre configured kit Y6630D1007
· 1 HCW 80 (room unit)
· 1 HC60NG (relay module)
· 2 AA batteries, 1.5 V, type LR6
The kit Y6630D1007 is provided pre-bounded.
The room unit HCW 80 is already assigned to the
relay module HC60NG. The teach-in is not
required in this kit.
2.2. Single provided devices
Single provided devices must be teached-in as
described in section “5 Teach-in (single devices
only)”.
Teach-in means the HCW 80 and HC60NG must
be RF bounded for communication.
2
Fig. 3: Opening the housing cover
1
2
Fig. 4: Removing the terminal covers
> 7 mm Æ
< 7 mm Æ
Fig. 5: Connecting the relay module to the power supply
4
Loading...