-1 -
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance(servicing) instructions in th e literature
accompanying the appliance.
OPERATION MANUAL
OSD COLOR CAMERA
with BMB (Black Mask BLC)
HCC-745N/P Series
READ AND KEEP THIS OPERATION MANUAL
-2 -
Warning:
This equipment generates and uses radio frequency energy
and if not installed and used properly, I.e., in strict accordance
with the instruction manual, may cause harmful interference
to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial
environment.
Warning:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE
PARTS INSIDE.
PREFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Indicate a potentially hazardous situation which if not avoided,
may result in minor or moderate injury. It may also be used to
alert against unsafe practices.
-3 -
CAUTION FOR SAFE OPERATION
1. Water and Moisture
To prevent fire or shock hazard, do not expose this camera
to rain or moisture.
2. Servicing
Do not attempt to disassemble or repair by yourself.
You may be exposed to dangerous voltage or other hazards.
Note that all servicing is qualified service personnel.
Modifications not approved by manufacturer could
void the user's authority to operate the equipment.
3. Power Sources
To prevent electric shocks and risk of hazards, do NOT use
more than the specified power source.
4. Environment
Do not install too warm or too cold place. Recommended
operation temperature is between -5℃ and 60℃
5. Sunlight
Do not point the camera at the sun. CCD can be damaged.
6. Heavy Shock and Vibration
Do not drop the camera or subject it to heavy shock of
vibration.
7. Install on an Unstable Place
Do not place or install this camera on an unstable place,
stand, tripod, bracket or table. That may cause serious injury
to people or damage to appliance.
8. When operation is incorrect or a malfunction is obs erved
While operating, if any abnormal condition (strange sound,
smell or smoke) or a malfunction (no pictures, etc.) is
observed, stop using the camera immediately, turn the
power off, then contact your supplier.
9. Cleaning
Turn the power off and wipe off the dirt with a dry soft
cloth. If it is extremely dirty, use furniture cleaner to wipe it
off. To clean the lens, use a blower or lens cleaning
tissue. (available from any camera dealer)
10. Do not shoot any source of bright light.
If the objects contain very bright areas, bright vertical or
horizontal lines may appear on the screen. This is called
"smear" , a Phenomenon which often occurs with solid
- state pickups, and is not a malfunction.
11. Damage Requiring service
Unplug the camera from the power source and refer
servicing to qualified service personnel under the following
condition:
a. If the power-supply cord or plug is damaged.
b. If the camera has been exposed to rain or water.
c. If liquid has been spilled, or objects have fallen into the camera.
d. If the camera does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the camera to its normal operation.
e. If the camera has been dropped or the cabinet has been damaged.
f . If the camera exhibits a distinct change in performance.
-4 -
CONTENTS
1. Features -------------------------------------------------------------- 5
2. Names & Functions ---------------------------------------------- 6
5. On Screen Display -------------------------------------------------- 11
Thank you for using this OSD Color Camera with BMB. To get the best
efficiency, read carefully all instructions in this manual before use, and
keep this manual for reference. If you have any problems with this camera,
contact your supplier to service.
4. Camera Control Methods------------------------------------------ 10
7. Dimensions ---------------------------------------------------------- 17
6. Specifications-------------------------------------------------------- 16
3. Installation----------------------------------------------------------- 8
-5 -
1. Features
Honeywell’s HCC-745N/P Series is a high sensitivity CCD color camera with high sensitivity function
of the field integration technique.
▣ 1/3” IT Super HAD CCD ( NTSC: 410,000 / PAL: 470,000 )
▣ Outstanding BLC implementation with Honeywell’s BMB(Black Mask BLC) function.
( 4 steps available : OFF / White / Gray / Black)
▣ Adapted CS/C mount lens adjustable.
▣ Excellent signal-to-noise ratio of more than 50dB.
▣ High Sensitivity : Minimum illumination of 0.001lx ( F1.2, 30IRE, SENS On X 128 )
▣ 2-WAY Auto Iris : Video iris or DC iris lens can be used.
▣ OSD Control :
Flickerless, AGC, Manual shutter control, Maximum Sensitivity select,
BMB Level, BLC Level, Title and Camera ID setting, Sync Mode
▣ External synchronization with LINE LOCK and Auto Detection.
▣ Auto White Balance : Auto white balance realizes true color reproduction within various light sources.
▣ Remote Control through RS485 / RS232C
-. Camera ID : 0 ~ 255
-. Title : 10 characters
-. Camera ID & Title Display Position : Bottom Right, Bottom Left, Top Right, Top Left, No Display
-. AWB Mode : ATW, AWC, INDOOR, USER FIX, OUTDOOR, Fluorescent, MWB
-. BLC Mode : OFF, Low BL, Mid BL, High BL
-. BMB Mode : OFF, White, Gray, Black
-. ELC / ALC Mode : ELC (AUTO/Manual), ALC (VSD Lens/DC Lens, Level)
-. SENS Mode : OFF, FIX, AUTO
-. Max Fields Control : x2 ~ x128
-. Sync. Control : AUTO, Internal, LineLock (V.PH control)
-. Shutter Speed Control : 10 steps including Flickerless
-. Max AGC Control : OFF ~ 38dB
-6 -
LENS CONNECTOR
Connect Auto Iris Lens
plug
Set Screw
Loosen Locking Ring with a Phillips
screwdriver to adjust Mounting Ring
2. Names & Functions
C/CS Mount Adaptor
• C-Mount lens : Turn Counterclockwise
• CS-Mount lens : Turn Clockwise
Loading...