Honeywell E3Point Data sheet

E3Point® SPECIFICATIONS

Toxic and Combustible Gas Detector Standalone Platform (Single or Dual-Gas Monitoring)

General Specications Uses Wall or duct-mounted gas detector for monitoring carbon monoxide (CO), nitrogen dioxide (NO2), oxygen (O2),

methane (CH4), hydrogen (H2), hydrogen sulphide (H2S), and propane (C3H8), installed as a standalone device with single-gas or dual-gas monitoring.

Size 20.56 x 14.90 x 6.72cm (8.09 x 5.87 x 2.65”) (H x W x D); Remote Sensor: 3.5 x 4.5 x 6.5 cm (1.36 x 1.75 x 2.56”)

Power Requirement 24 Vac nominal (17-27Vac), 50/60 Hz, 0.35 A; 24Vdc nominal (20-38Vdc); with remote sensor: 7 W max. Optional Main AC Input 120Vac nominal, ± 10% (with on-board transformer) Relay Output 2 DPDT relays, 5A @ 250Vac; 5A @ 30Vdc Communications 4-20mA Operating Environment Commercial, Indoor, Extreme Temperature Environments Operating Temperature H

CO: -20 to 50ºC (-4 to 122ºF)

Sensor Type Electrochemical cell (CO, NO2, H2S, O2); catalytic (CH4, H2, C3H8,) Response Time T90 < 50 seconds

With ECLAB T90 < 240 seconds

Display 8 character, 2 line backlit LCD Visual Indicators Green LED: Power

Amber LED 1: Alarm/Fault Amber LED 2: Alarm/Fault

Audible Alarm >85 dBA at 3 m (10 ft) Accuracy ± 3% of full scale @ 25ºC Detection Ranges and Alarm Levels Gas Resolution Range Alarm A Alarm B Alarm C CO (Carbon monoxide) 1 ppm 0-250 ppm 25 ppm 100 ppm 225 ppm

H2S (Hydrogen sulfide) 0.1 ppm 0-50 ppm 10 ppm 15 ppm 20 ppm NO

(Nitrogen dioxide) 0.1 ppm 0-10 ppm 0.7 ppm 2 ppm 9 ppm

O2 (Oxygen) 0.1% vol. 0-25% vol. 19.5% vol. 22% vol. 22.5% vol. H2 (Hydrogen)

CH4 (Methane) 0.5% LEL 0-100% LEL 25% LEL 50% LEL 90% LEL C3H

(Propane)

Enclosure Polycarbonate

Certication

CSA C22.2 No. 61010-1, UL 61010-1; FCC part 15; ICES-003 issue 4; ISO 9001-2008

S, NO2, O2, CH4, H2, C3H8: -40 to 50ºC (-40 to 122ºF)

0.5% LEL 0-100% LEL 25% LEL 50% LEL 90% LEL

0.5% LEL

0-100% LEL 25% LEL 50% LEL 90% LEL