Page 1
C7735 Return Air Sensor
Application: Mount on return duct for backup control of non-zoned
systems
Dimensions, Approximate: 3 7/8 in. high x 4 1/8 in. wide x 1 1/4 in. deep
(77 mm x 102 mm x 25 mm). Sensor probe: 3 3/4 in. long (77 mm)
Product Number Comments Used With
C7735A1000/U Return Air Sensor is also available in kits for
non-zoned systems
THM5320R1000 Equipment Interface Module; TH6320R1004 or TH5320R1002
Wireless FocusPRO® Thermostat
C7089 Outdoor Sensor
Temperature Sensors
Mount on return duct for backup control of non-zoned RedLINK™
enabled wireless systems. Works with the EIM to maintain safe
indoor temperatures if power is lost at the wireless thermostat.
• Works with THM5320R1000 Equipment Interface Module to
maintain safe indoor temperatures if power is lost at the wireless
thermostat
• Takes control of the equipment by turning on the blower fan and
sensing the indoor temperature of the home
• Controls heating at 62 F and cooling at 82 F
• Provides homeowners with peace of mind
• Installs in minutes
• Includes mounting hardware
Color: Gray
Operating Temperature Range: 0 F to 200 F (-17.8 C to 93.3 C)
Mounting: Mounts on return duct
Remote outdoor temperature sensor, when installed, the current
outdoor temperature is displayed. Also can be used to manage
dual fuel and lock-out expensive auxiliary heat in heat pump
applications.
• Mounting clip allows easy sensor positioning on siding or soffit
• Includes 60 in. leadwires
• Factory calibrated; no field calibration required
• Maximum wire run of 200 feet
Controls
Home
Dimensions, Approximate: 2 1/4 in. x 3/8 in. with 60 in. leadwires
(57 mm x 10 mm with 1524 mm leadwires.)
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Product Number Description Application Used With
C7089B1000/U Outdoor sensor used to measure
C7089U1006/U Outdoor Sensor used to measure
outdoor temperature
the outdoor temperature
Outdoor sensor for Chronotherm IV
thermostats and TZ-4 Zone Panel
Outdoor sensor for Prestige® IAQ,
VisionPRO with RedLINK™ and
VisionPRO IAQ Thermostats
Ambient Temperature Range: -40 F to +128 F (-40 C to +53 C)
Mounting: Mounting Clip provided and screws provided.
TZ-4 Zone Panel
Prestige® IAQ, VisionPRO® Series Thermostats,
VisionPRO® IAQ Thermostat
C7189 Remote Indoor Sensor
The Remote Indoor Temperature Sensor is used to sense
temperature remotely.
• Used to sense temperature if the thermostat is installed in a
poor temperature sensing location.
• Small remote temperature sensor to match any room decor.
• Easy to install and use.
• Factory calibrated; no field calibration required.
• Works with a maximum 200 foot wire run.
Application: Remote Indoor Temperature Sensor for
VisionPRO and VisionPRO IAQ Thermostats
Dimensions, Approximate: 1 1/2 in. wide x 2 1/4 in. high x 3/4 in. deep
(38 mm x 57 mm x 19 mm)
Color: Premier White®
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Ambient Temperature Range: 45 F to 88 F (7 C to 32 C)
Mounting: Mounts directly on wall using mounting screws and anchors
provided
Prestige® IAQ,
Product Number Description Temperature Setting Range Used With
* C7189U1005/U Remote indoor sensor for remote sensing applications See Thermostats
* TRADELINE models • SUPER TRADELINE models
70-6910 35
Prestige IAQ
VisionPRO® IAQ Series Thermostats
®, VisionPRO® and
Loading...