Advanced Burner Controls
Advanced Burner Controls
The ABC900 Advanced Burner Control is a process and logic control that can be programmed for burner and boiler applications. This flexible platform can be programmed to provide all of the control functions required for fuel/air ratio control and O2 trim.
Power Supply: 120 to 240 VAC
Operating Temperature Range: 32 F to 140 F (0 C to 60 C) Operating Humidity Range (% RH): 10 to 90%
Programming of the ABC900 is completed using the HC900 Designer Software. Additional programming can provide:
•Optional drum level control
•Boiler feedwater control
•Draft damper control
•Fuel selection inputs
•Mass fuel flow monitoring
•Dedicated actuator channels
•Dedicated VFD channels
•Interface with 7800 SERIES primary safety controls
•Interface with third party displays
•Communication with building automation systems via Modbus
Approvals
CE: CE
Canadian Standards Association: Certified
Canadian Underwriters Laboratories, Inc: Listed
Factory Mutual: Approved
Underwriters Laboratories, Inc: Listed
|
|
|
|
|
|
Dimensions, Approximate |
|
|
|
|
|
|
|
|
Product Number |
(inch) |
(mm) |
Description |
|
|
|
|
|
|
ABC900A1000 |
10-1/2 in. wide x |
267 mm wide x |
C30 CPU (4) |
I/O Modules (1 analog input module, 1 analog output module, 1 digital input module, |
|
5-3/8 in. high x |
137 mm high x |
1digital output module with shield kit, power supply and resistor kit) |
|
|
6 in. deep |
152 mm deep |
|
|
|
|
|
|
|
ABC900B1009 |
16-1/2 in. wide x |
419 mm wide x |
C30 CPU (8) |
I/O Modules (2 analog input modules, 1 analog output module, 1 digital input module, |
|
5-3/8 in. high x |
137 mm high x |
2 digital output modules with shield kit, power supply) |
|
|
6 in. deep |
152 mm deep |
|
|
|
|
|
|
|
Advanced Burner Controls - Oxygen Sensor
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temperature Range, |
|
|
|
|
Dimensions, Approximate |
NEMA |
Power |
Operating |
|
|
|
||
Product Number |
(inch) |
(mm) |
Rating |
Supply |
(F) |
(C) |
Description |
Used With |
|
|
|
|
|
|
|
|
|
|
|
99-4218-14-07/U |
— |
— |
— |
— |
— |
— |
Cable Connector for MF020 |
MF020 |
|
|
|
|
|
|
|
|
|
|
|
MF020-0-LC3 |
1 |
5/8 in. wide x |
42 mm wide x |
IP65 |
24 Vdc |
-148 F to |
-100 C to |
High Temperature Oxygen Sensor 1 |
99-4218-14-07; |
|
2 |
7/16 in. high x |
60 mm high x |
|
|
752 F at |
400 C at |
to 250 mbar (0.4 to 200"w.c.) |
SS-810-1-12BT; |
|
12 13/16 in. |
325 mm deep |
|
|
probe tip |
probe tip |
220mm/8.7” Probe, 4-20ma output, |
ABC900A,B; |
|
|
deep |
|
|
|
|
|
0.1 to 25 volume %O2 |
YP900 |
|
MF020-1-LC3 |
1 |
5/8 in. wide x |
42 mm wide x |
IP65 |
24 Vdc |
-148 F to |
-100 C to |
High Temperature Oxygen Sensor 1 |
99-4218-14-07P |
|
2.4h x 1 9 13/16 |
60 mm high x |
|
|
752 F at |
400 C at |
to 250 mbar (0.4 to 200"w.c.) |
SS-810-1-12BT; |
|
|
in. deep |
503 mm deep |
|
|
probe tip |
probe tip |
400mm/15.7” Probe, 4-20mA |
ABC900A,B; |
|
|
|
|
|
|
|
|
|
output, 0.1 to 25 volume %O2 |
YP900 |
MF020-2-LC3 |
1 |
5/8 in. wide x |
42 mm wide x |
IP65 |
24 Vdc |
-148 F to |
-100 C to |
High Temperature Oxygen Sensor 1 |
99-4218-14-07P |
|
2.4h x 27 13/16 |
60 mm high x |
|
|
752 F at |
400 C at |
to 250 mbar (0.4 to 200"w.c.) |
SS-810-1-12BT; |
|
|
in. deep |
706 mm deep |
|
|
probe tip |
probe tip |
600mm/23.6” Probe, 4-20mA |
ABC900A,B; |
|
|
|
|
|
|
|
|
|
output, 0.1 to 25 volume %O2 |
YP900 |
SS-810-1-12BT/U |
— |
— |
— |
— |
— |
— |
Compression tube fitting 1/2” Bore |
MF020 |
|
|
|
|
|
|
|
|
|
through, 3/4” NPT for MF020 |
|
|
|
|
|
|
|
|
|
|
|
798 |
customer.honeywell.com |
70-6910 |