Honeywell 9700L0P, 9700LUP User Manual
®
Dolphin
with Windows Mobile® 6.5
9700 Mobile Computers
User’s Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other
information contained in this document without prior notice, and the reader should in all cases consult HII
to determine whether any such changes have been made. The information in this publication does not
represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights are reserved. No
part of this document may be photocopied, reproduced, or translated into another language without the
prior written consent of HII.
Web Address: www.honeywellaidc.com
Trademarks
Dolphin, Dolphin RF, HomeBase, Mobile Base, and QuadCharger are trademarks or registered
trademarks of Hand Held Products, Inc. or Honeywell International Inc.
Microsoft, Windows, Windows Mobile, Windows CE, Windows NT, Windows 2000, Windows ME,
Windows XP, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of
Microsoft Corporation.
Other product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are the property of their respective owners.
Patents
Please refer to the product packaging for a list of patents.
Other Trademarks
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell.
Declaration for the Specification
FCC ID: HD59700LUP for 802.11 a/b/g +BT+GSM
FCC ID: HD59700LOP for 802.11 a/b/g +BT
IC ID: 1693B-9700LUP for 802.11 a/b/g +BT+GSM
IC ID: 1693B-9700LOP for 802.11 a/b/g +BT
©2009 Honeywell International Inc. All rights reserved.
Table of Contents
Chapter 1 - Agency Information
Label Locations ....................................................................................................................1-1
LED Safety Statement .........................................................................................................1-2
Infrared LED Safety Statement ............................................................................................1-2
UL and cUL Statement.........................................................................................................1-2
Approvals by Country...........................................................................................................1-2
R&TTE Compliance Statement—802.11a/b/g, Bluetooth, and/or GSM...............................1-3
Dolphin RF Terminal—802.11a/b/g, Bluetooth, and/or GSM ...............................................1-3
For European Community Users .........................................................................................1-4
Waste Electrical and Electronic Equipment Information ......................................................1-4
Chapter 2 - Getting Started
Out of the Box ......................................................................................................................2-1
Today Screen.......................................................................................................................2-3
Navigation Bar .....................................................................................................................2-3
Command Bar ......................................................................................................................2-3
Icons in the Navigation Bar ..................................................................................................2-4
Pop-Up
Chapter 3 - Hardware Overview
Peripherals for the 9700.......................................................................................................3-2
Accessories for the 9700 .....................................................................................................3-3
Front Panel: 9700 ................................................................................................................3-4
Back Panel: 9700 ................................................................................................................3-6
Side Panels:
Bottom Panel: 9700 ...........................................................................................................3-10
Using the Touch Panel.......................................................................................................3-11
Healthcare Housing ...........................................................................................................3-12
Batteries .............................................................................................................................3-13
Resetting the Terminal .......................................................................................................3-16
Suspend
Menus
Standard Configurations for the 9700 ............................................................................3-1
Front Panel Features for the 9700 .................................................................................3-5
Back Panel Features for the 9700..................................................................................3-7
Left Side .........................................................................................................................3-8
Right Side ......................................................................................................................3-8
Installing a Memory Card ...............................................................................................3-9
Installing a SIM
I/O Connector ...............................................................................................................3-10
Installing a Screen Protector ........................................................................................3-11
Main Battery Pack ........................................................................................................3-13
Internal Backup Battery ................................................................................................3-14
Managing Battery Power ..............................................................................................3-14
Checking Battery Power...............................................................................................3-15
Soft Reset (Warm Boot) ...............................................................................................3-16
Hard Reset (Cold Boot) ................................................................................................3-16
.....................................................................................................................2-5
9700
................................................................................................................3-8
Card
......................................................................................................3-9
Mode
...................................................................................................................3-16
iii
Chapter 4 - Using the Scan Image Engine
Overview.............................................................................................................................. 4-1
Angled Imaging.............................................................................................................. 4-1
Image Engine Specifications ............................................................................................... 4-1
Laser Specifications ............................................................................................................ 4-2
Supported Bar Code Symbologies ..................................................................................... 4-2
Decoding ............................................................................................................................. 4-3
To Decode a Bar
Code
.................................................................................................. 4-3
Aiming Options .............................................................................................................. 4-4
Capturing Images ................................................................................................................ 4-5
Taking an Image ............................................................................................................ 4-5
Uploading Images.......................................................................................................... 4-6
Chapter 5 - Using the Keyboards
Available Keyboards ............................................................................................................ 5-1
Keyboard Combinations ................................................................................................ 5-1
Common Buttons ........................................................................................................... 5-1
Using the Function Keys...................................................................................................... 5-2
Using the Modifier Keys ...................................................................................................... 5-3
Using the Navigation Keys .................................................................................................. 5-3
31-Key Numeric Keyboard .................................................................................................. 5-4
31-Key Keyboard Combinations .................................................................................... 5-5
45-Key QWERTY Keyboard ................................................................................................ 5-7
45-Key Keyboard Combinations .................................................................................... 5-8
Chapter 6 - System Settings
Overview.............................................................................................................................. 6-1
Clock & Alarms .................................................................................................................... 6-2
............................................................................................................................................. 6-2
Personal Menu .................................................................................................................... 6-3
Buttons........................................................................................................................... 6-4
Input............................................................................................................................... 6-5
System
Menu.......................................................................................................................
About ............................................................................................................................. 6-8
Backlight ........................................................................................................................ 6-8
Certificates..................................................................................................................... 6-9
Encryption...................................................................................................................... 6-9
Error Reporting .............................................................................................................. 6-9
External GPS ............................................................................................................... 6-10
Managed Programs ..................................................................................................... 6-10
Memory........................................................................................................................
RIL ............................................................................................................................... 6-12
Power........................................................................................................................... 6-13
Regional Settings......................................................................................................... 6-13
Remove Programs....................................................................................................... 6-13
Screen ......................................................................................................................... 6-15
Task
Manager..............................................................................................................
6-7
6-11
6-16
iv
Chapter 7 - Communication
Connections
Menu...............................................................................................................
Using the IrDA Port.............................................................................................................. 7-2
IrDA Port Location ......................................................................................................... 7-2
Sending Data ................................................................................................................. 7-2
Receiving Data .............................................................................................................. 7-3
Connections Manager ......................................................................................................... 7-4
To Access the Connections
Manager............................................................................
Task Tab........................................................................................................................ 7-4
Advanced Tab................................................................................................................ 7-5
Dolphin Wireless Manager .................................................................................................. 7-6
Dolphin Wireless Manager Window............................................................................... 7-6
Enabling the Radios....................................................................................................... 7-6
Accessing Radio Configuration Utilities ......................................................................... 7-7
ActiveSync Communication ................................................................................................. 7-8
Installing Additional Software ............................................................................................ 7-10
Adding Programs to the Terminal Using ActiveSync ................................................... 7-10
Adding Programs Directly from the Internet................................................................. 7-11
9700 COM Port Assignment Table .................................................................................... 7-12
Chapter 8 - Working with GSM
Overview.............................................................................................................................. 8-1
Quad Band Antenna ...................................................................................................... 8-1
SIM Card Installation ........................................................................................................... 8-2
Enabling the GSM
Radio
..................................................................................................... 8-4
Voice Communication.......................................................................................................... 8-5
Audio
Modes..................................................................................................................
Volume Control .............................................................................................................. 8-5
Accessing the Dialer Window ........................................................................................ 8-5
Dialing
............................................................................................................................ 8-5
Sending Calls................................................................................................................. 8-6
Ending Calls................................................................................................................... 8-6
Keyboard Combinations for
Calls ..................................................................................
View Options.................................................................................................................. 8-6
Setup Options ...................................................................................................................... 8-7
Data Communication ........................................................................................................... 8-8
Establishing Data Communication................................................................................. 8-8
Ending the Data Connection........................................................................................ 8-10
Roaming ............................................................................................................................
Chapter 9 - Working with the Bluetooth Radio
Enabling the Bluetooth
Connecting to Other Bluetooth Devices .............................................................................. 9-2
Pairing and Trusted Devices ............................................................................................... 9-4
Types of Devices and Services ........................................................................................... 9-5
Connecting to Bluetooth Printers ......................................................................................... 9-6
Connecting to Bluetooth Headsets ...................................................................................... 9-6
Transferring Files................................................................................................................. 9-7
Making the Terminal
Radio
.............................................................................................. 9-1
Discoverable ......................................................................................
7-1
7-4
8-5
8-6
8-11
9-8
v
Selecting COM Ports ........................................................................................................... 9-8
Chapter 10 - Working with GPS
Overview............................................................................................................................ 10-1
Assisted GPS Support ....................................................................................................... 10-1
Powering the GPS Module ................................................................................................ 10-1
Communication Ports ........................................................................................................ 10-2
Selecting the Port ........................................................................................................ 10-2
COM7 .......................................................................................................................... 10-2
GPS Intermediate
Driver..............................................................................................
GPS Demo ........................................................................................................................ 10-3
Chapter 11 - Dolphin 9700 HomeBase Device
Overview............................................................................................................................ 11-1
Parts and Functions........................................................................................................... 11-2
Power ................................................................................................................................ 11-4
Serial Connector ................................................................................................................ 11-5
Charging the Main Battery ................................................................................................. 11-6
To Power a Terminal and Charge its Main Battery...................................................... 11-6
Charging a Spare Battery in the Auxiliary Battery Well ............................................... 11-6
Communication.................................................................................................................. 11-7
Connecting the Communication Cables ...................................................................... 11-7
Establishing Communication ....................................................................................... 11-7
Communicating with the Dolphin Terminal ........................................................................ 11-7
Verifying Data Transfer................................................................................................ 11-8
RS232 Communications
Cables........................................................................................
RS232 Pin Configuration ............................................................................................. 11-9
Mounting .......................................................................................................................... 11-10
Desk Mounting........................................................................................................... 11-10
Wall Mounting ............................................................................................................ 11-11
Chapter 12 - Dolphin 9700 Mobile Base Device
Overview............................................................................................................................ 12-1
Front Panel ........................................................................................................................ 12-2
Bottom Panel ..................................................................................................................... 12-3
Powering the Dolphin Terminal ......................................................................................... 12-4
Charging the Dolphin Terminal .......................................................................................... 12-4
Mounting ............................................................................................................................ 12-5
Power ................................................................................................................................ 12-6
Establishing Communication ............................................................................................. 12-7
Connecting the Communication Cables ...................................................................... 12-7
Establishing ActiveSync Communication..................................................................... 12-7
Chapter 13 - Dolphin 9700 ChargeBase Device
Overview............................................................................................................................ 13-1
Parts and Functions........................................................................................................... 13-2
Supplying Power................................................................................................................ 13-3
10-2
11-9
vi
Inserting and Removing Terminals .................................................................................... 13-4
Charging Terminals ........................................................................................................... 13-4
Mounting ............................................................................................................................ 13-5
Chapter 14 - Dolphin 9700 QuadCharger Device
Overview............................................................................................................................ 14-1
Parts and Functions........................................................................................................... 14-2
Supplying Power................................................................................................................ 14-3
Inserting and Removing Battery Packs ............................................................................. 14-4
Charging Batteries ............................................................................................................. 14-4
Using the Battery Analyzer ................................................................................................ 14-5
Mounting ............................................................................................................................ 14-6
Desk Mounting............................................................................................................. 14-6
Wall Mounting .............................................................................................................. 14-7
Troubleshooting ................................................................................................................. 14-8
Chapter 15 - Customer Support
Product Service and
Online Product Service and Repair Assistance ........................................................... 15-1
Technical Assistance ......................................................................................................... 15-2
Online Technical Assistance........................................................................................ 15-2
Limited Warranty ............................................................................................................... 15-3
How to Extend Your Warranty ..................................................................................... 15-4
Repair...............................................................................................
15-1
vii
viii
1
Agency
Dolphin 9700 terminals meet or exceed the requirements of all applicable standards organizations for
safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to
operate them according to the agency guidelines that follow. Please read these guidelines carefully
before using your Dolphin terminal.
Information
Label Locations
Dolphin 9700
Laser Safety Label
If the following label is attached to your product, it indicates the product contains an engine with a laser
aimer:
Image Engines with Integrated Laser Aimers
LASER LIGHT.
Class 2 Laser
IEC60825-1: 1993+A1+A2.
Output: 650nM. Complies with
and 1040.11 except
Laser Notice
Laser Eye Safety Statement: This device has been tested in accordance with and complies with
IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007. LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER
PRODUCT, 1.0 mW MAX OUTPUT: 650nM.
Caution! Use of controls or adjustments or performance of
may result in hazardous radiation exposure.
Do not
Product.
No. 50,
Compliance
stare into
for
deviations pursuant
dated June
1.0
21
beam.
mW
CFR
24, 2007.
MAX
1040.10
to
Label
procedures
other than those specified herein
1 - 1
LED Safety Statement
The LED output on this device has been tested in accordance with IEC60825-1 LED safety and certified
to be a Class 1 LED device.
The maximum power outputs for each diode are as follows:
• Illumination LED: 194.0 uW, wavelength: 626nm+/-30nm
• Aimer laser (5300 engine): 360.1 uW, wavelength: 655nm
• Aimer LED (5100 engine): 81.6 uW, wavelength: 526nm+/-30nm
Infrared LED Safety Statement
Caution! Do not view directly with optical instruments.
The maximum power outputs for the IR LED is 145.1 uW. LEDs are pulsed at a frequency of 115,200 Hz
with a duty cycle of 18.75% where the “ON” time of a single pulse is 1.6275 x 10
-6
seconds.
UL and cUL Statement
UL and cUL listed: UL60950-1 and CSA C22.2 No. 60950-1-03.
Approvals by Country
Country
EMC, Radio, & SAR
Safety
U.S.A.
Canada
European Community/CE
FCC Part 15, Subpart B
FCC Part 15, Subpart C, 15.247
FCC Part 15, Subpart E
FCC Part 22H
FCC Part 24E
FCC SAR OET 65 Supplement C
ICES-003 (Class B)
RSS 132
RSS 133
RSS 210
EN300328
EN301893
EN55022
EN55024
EN301489-1
EN301489-7/24
EN301489-17
EN300328
3GPPTS 51.010-1
EN301511
EN301908
EN50360
EN50361
EN50371
EN50392
IEC6220-1 and IEC6220-2
EN300440
UL60950-1
cUL60950
EN/IEC60950-1
EN/IEC60825-1
This Class 2 Laser Product is in accordance with the requirements of IEC 60825-1 Ed. 1.2 Clause 6.2(a).
1 - 2
R&TTE Compliance Statement—802.11a/b/g, Bluetooth, and/or GSM
Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/
EC).
This product is marked with in accordance with the Class II product requirements specified in
the R&TTE Directive. In addition, this product complies to 2006/95/EC Low Voltage Directive
supplied
with the recommended power supply. Honeywell shall not be liable for use of our product with
equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply
with the Low Voltage Directive.
The equipment is intended for use throughout the European Community; PAN European Frequency
Range: 2.402–2.480 GHz. Restrictions for use in France are as follows:
• Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.400–2.4835 GHz
• Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.400–2.454 GHz band & maximum power
(EIRP*) of 10 mW for the 2.454–2.483 MGHz band.
• 5Ghz band: UNII (Unlicensed National Information Infrastructure) or band1 (5.150 to 5.250 GHz) is
restricted to indoor use only. Any other use will make the operation of the device illegal.
For further information, please contact:
Honeywell Imaging & Mobility Europe BV
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands
when
Dolphin RF Terminal—802.11a/b/g, Bluetooth, and/or GSM
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet helpful: “Something About Interference.”
This is available at FCC local regional offices. Our company is not responsible for any radio or television
interference caused by unauthorized modifications of this equipment or the substitution or attachment of
connecting cables and equipment other than those specified by our company. The correction is the
responsibility of the user. Use only shielded data cables with this system.
In
accordance
for compliance could void the user’s authority to operate the equipment.
CAUTION!
with FCC 15.21, changes or modifications not expressly approved by the party responsible
Any changes or modifications not expressly approved by the grantee of this device could void
the user's authority to operate the equipment.
1 - 3
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide
is subject to licensing.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
maximum
shielding. Equipment (or its transmit antenna) installed outdoors
For European Community Users
Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Waste Electrical and Electronic Equipment Information
This product has required the extraction and use of natural resources for its production. It may contain
hazardous substances that could impact health and the environment, if not properly disposed.
In order to avoid the dissemination of those substances in our environment and to diminish the pressure
on the natural resources, we encourage you to use the appropriate take-back systems for product
disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a
sound way.
The crossed out wheeled bin symbol informs you that the product should not be disposed of along
with municipal waste and invites you to use the appropriate separate take-back systems for product
disposal.
If you need more information on the collection, reuse, and recycling systems, please contact your local or
regional waste administration.
You may also contact your supplier for more information on the environmental performances of this
product.
Pacemakers, Hearing Aids and Other Electrically Powered Devices
Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires
devices to operate properly in an EM Field with a strength of 3V/m over a frequency range of 26 to
1000MHz. The maximum allowable field strength emitted by the Dolphin terminal is 0.3V/m according to
Subpart B of Part 1 of the FCC rules. Therefore, the RF from the Dolphin terminal has no effect on medical
devices that meet the IEC specification.
Microwaves
The radio in the Dolphin RF terminal operates on the same frequency band as a microwave oven.
Therefore, if you use a microwave within range of the Dolphin RF terminal you may notice performance
degradation in your wireless network. However, both your microwave and your wireless network will
continue to function. The Dolphin Batch terminal does not contain a radio, and therefore, is not affected
by microwave ovens.
1 - 4
For United State of America Users
For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for
use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from
the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Operation on the 5.15-5.25GHz frequency band is restricted to indoor use only. The FCC requires
indoor use for the 5.15-5.25GHz band to reduce the potential for harmful interference to co-channel
Mobile Satellite Systems.
Using Your Phone With a Hearing Aid Device
Your Dolphin 9700 device is compliant with the FCC Hearing Aid Compatibility (HAC) requirements.
When some wireless phones are used near some hearing devices (hearing aids and cochlear
implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and phones also vary in the amount of interference they
generate. The wireless telephone industry has developed ratings for some of their mobile phones, to
assist hearing-device users in finding phones that may be compatible with their hearing devices. Not all
phones have been rated. Phones that have been rated have a label on the box. Your Dolphin 9700 has
been tested for hearing aid device compatibility and has an M3 and/or T3 rating.
These ratings are not guarantees. Results will vary, depending on the level of immunity of your hearing
device and the degree of your hearing loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less
interference with hearing devices than phones that are not labeled. M4 is the better/higher of the two
ratings. T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with
a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all hearing devices contain telecoils.) The more immune
your hearing aid device is, the less likely you are to experience interference noise from your wireless
phone. Hearing aid devices should have ratings similar to those of phones. Ask your hearing health-care
professional for the rating of your hearing aid.
Hearing devices may also be measured for immunity to this type of interference. Your hearing device
manufacturer or hearing health professional may help you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to experience interference noise from wireless devices.
For additional information about the FCC's actions with regard to hearing aid compatible wireless
devices and other steps the FCC has taken to ensure that individuals with disabilities have access to
telecommunications services, please go to www.fcc.gov/cgb/dro.
2 - 1
!
2
Getting
Started
Out of the Box
Verify that the carton contains the following items:
• Dolphin 9700 mobile computer (the terminal)
• Main battery pack (7.4V Li-ion)
• Quick Start Guide
Note: If you ordered accessories for your terminals, verify that they are also included with the order.
Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned
for service. For details, see Product Service and Repair on page 15-1.
Step 1. Install the Main Battery Pack
New Image
Required
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
1 - 6
Step 2. Charge the Main and Backup Batteries
The power supply for Dolphin terminals consists of two types of battery power: the main battery pack
installed on the back panel and the backup battery that resides inside the terminal.
The main battery powers the terminal. The internal backup battery charges off the main battery and
maintains the application data stored in RAM memory for up to 30 minutes when the terminal’s main
battery pack is completely discharged or removed.
Before Initial Use
Time to Charge
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
!
Terminals are shipped with both batteries discharged of all power. Charge the main battery pack
for a minimum of 4 hours before initial use.
The initial charging time for the main battery pack is 4 hours, and 8 hours for the internal backup
battery. Connect the terminal to one of the 9700 series charging peripherals to charge; see
Peripherals for the 9700 on page 3-2.
Step 3. Boot the Terminal
The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or
interrupt the boot process. Only tap the screen when prompted.
When the boot process is complete, the Today screen appears, and the terminal is ready for use.
Note: Because, the Today screen appears a number of times during the boot process, wait a few seconds before
tapping anything on the Today screen.
Step 4. Set the Time and Date
You need to re-set the time and date after every hard reset of the terminal. On the Today screen, tap the
line that displays the time and date,
Windows Mobile 6.5, Professional Windows Mobile 6.5,
Classic
The Clock Settings screen appears.
The time zone defaults to GMT-5 Eastern US; tap the arrow to the right of GMT-5 Eastern US to select
another time zone. Set the correct time and date in the remaining fields and tap OK to save.
2 - 2
Today Screen
After the Dolphin terminal initializes the first time, you see the Today screen.
Windows Mobile 6.5, Professional Windows Mobile 6.5,
Classic
You can also display the Today screen anytime by tapping Start and then Today.
Navigation Bar
The Navigation bar, located at the top of the screen, displays the active program and current time. It also
provides access to the Start menu, which allows you to open programs and access the system settings.
Start menu: Grants
access to system
functions.
Icons here indicate
the status of various
system functions.
Command Bar
The Command bar is located at the bottom of application windows.
Menus change
according to the
open application.
The Task tray
displays icons for
programs running in
the background.
2 - 3
Icons in the Navigation Bar
Indicator Meaning
The terminal could not synchronize data with the workstation via ActiveSync.
New e-mail or text message (SMS)
New voicemail
New instant message
Ringer off
Voice call
Voice call in progress
Calls are forwarded
Call on hold
Missed call
Data call in progress
Battery levels (1–4). Tap this icon to open the Power system setting and see the
charge percentage (see page 3-15).
4 - 2
Critical battery – The charge percentage is at the critical battery point set in
the registry (the default is 10%). For details about the critical battery point,
(see page 3-14).
Tap this icon to open the Power system setting and see the charge percentage (see
page 3-15).
Terminal is running on external power. (If a battery pack is installed, the battery is
charging in the background.)
The terminal is not connected to external power. A battery is installed, but is defective;
specifically, its charge level cannot be measured.
No SIM card is installed
GPRS available
GPRS connected
EDGE available
Icons in the Navigation Bar
Indicator Meaning
EDGE connected
Roaming
Radio is disabled
The radio is not connected to a network.
Radio connected
No radio signal
The terminal is searching for a signal.
Radio signal strength
Wi-Fi on
Wi-Fi data call
Pending alarm
Bluetooth
Pop-Up Menus
With pop-up menus, you can quickly choose an action for a selected item. To access a pop-up menu, tap
and hold the stylus on the item name of the action you want to perform. When the menu appears, lift the
stylus, and tap the action you want to perform.
Tap anywhere outside the menu to close the menu without performing an action.
2 - 5
Selecting Programs
To see the programs loaded on your terminal, tap Start to access the Start Menu. To open a
program, tap once on the program icon.
To move an icon to the top of the Start Menu, tap and hold the stylus on the icon you want to move. Tap
on Move to Top. To move the icon down, tap and hold the stylus on the icon. Tap on Move Down.
File Explorer
You can also use the File Explorer to find files and organize these files into folders.
Tap
Start
> File Explorer .
Tap the Up button at the bottom of the screen to move up one level in the directory.
You can move files in File Explorer by tapping and holding on the item you want to move, and then tapping
Cut or Copy and Paste on popup menus.
Search
The Search feature helps you quickly locate information. Tap Start > Search Phone .
Enter the text you want to find, select a data type, and then tap Go to start the search. To quickly find
information that is taking up storage space, select Larger than 64 KB in the Type drop-down field.
6 - 2
3
Hardware
Standard Configurations for the 9700
WLAN & WPAN
• Microsoft Windows Mobile 6.5 Classic
• Marvell® PXA270 624 MHz
• 256MB SDRAM X 1GB Flash
• Two in-mold, hard-top keyboard options
• 1620mAh extended life main battery
• Adaptus Imaging Technology: 5100SR/SF
or 5300SR/SF/HD image
• 802.11a/b/g and Bluetooth
WLAN, WPAN, & WWAN
• Microsoft Windows Mobile 6.5 Professional
• Marvell PXA270 624 MHz
• 256MB SDRAM X 1GB Flash
• Two in-mold, hard-top keyboard options
• 1620mAh extended life main battery
• Adaptus Imaging Technology: 5100SR/SF
or 5300SR/SF/HD image
• 802.11a/b/g, Bluetooth, and GSM/GPRS
WLAN, WPAN, & WWAN with GPS
• Microsoft Windows Mobile 6.5 Professional
• Marvell PXA270 624 MHz
• 256MB SDRAM X 1GB Flash
• Two in-mold, hard-top keyboard options
• 1620mAh extended life main battery
• Adaptus Imaging Technology: 5100SR/SF
or 5300SR/SF/HD image
• 802.11a/b/g, Bluetooth, and GSM/GPRS
• GPS
Some configurations of the 9700 terminal are available with an external housing made of plastic that is
specifically designed for the healthcare industry. For more information, see Healthcare Housing on page
3-12.
Overview
engines
engines
engines
3 - 1
Peripherals for the 9700
Each of the following items is sold separately to enhance the capabilities of your Dolphin terminal.
Dolphin 9700 HomeBase™ Device
The Dolphin 9700 HomeBase device, a charging and communication cradle, supports both RS232 and
USB communications, which enable it to interface with the majority of PC-based enterprise systems. This
device also contains an auxiliary battery well that charges a spare Li-ion battery.
For more information, see Dolphin 9700 HomeBase Device on page 11-1.
Dolphin 9700 Mobile Base™ Device
The Dolphin 9700 Mobile Base device, a charging and communication cradle, designed specifically for
in-premise and in-transit data collection applications. It features a flexible mounting bracket, and a
cigarette lighter adapter or power cable to adapt it to your environment.
The serial connector supports RS232 communication and power out to peripheral devices, such as
handheld scanners.
For more information, see Dolphin 9700 Mobile Base Device on page 12-1.
Dolphin 9700 ChargeBase
The Dolphin 9700 ChargeBase is a 4-slot charging cradle that holds, powers, and charges terminals.
For more information, see Dolphin 9700 ChargeBase on page 3-2.
Dolphin 9700 Net Base
The Dolphin 9700 Net Base is a 4-slot charging/communication cradle that holds, powers, charges, and
communicates with terminals. Ethernet communication occurs via statically and
dynamically-assigned
addresses.
For more information about the Dolphin 9700 Net Base, please consult the Dolphin Net Base Quick Start
Guide.
Dolphin 9700 QuadCharger™ Device
The Dolphin 9700 QuadCharger device is a 4-slot charging station for 9700 Li-ion battery packs. The 4th
slot features a battery analyzer that completely resets and re-calibrates a battery and displays its resulting
capacity.
For more information, see Dolphin 9700 QuadCharger Device on page 14-1.
IP
3 - 2
Accessories for the 9700
Each of the following items is sold separately to enhance your terminal’s capabilities.
Note: When using accessories where the terminal is worn on the body, the terminal’s touch panel must face away
from the body.
Dolphin 9700 Mobile Charger
The Dolphin 9700 Mobile Charger is a charging cable that connects the terminal directly to a 12 Volt DC
power source, such as a cigarette lighter port inside a vehicle, eliminating the need for a cradle. Intelligent
battery technology on-board the terminal ensures proper charging. The Dolphin 9700 Mobile Charger is
an ideal low-cost charging solution for in-transit mobile applications.
Dolphin 9700 Mobile Mount
The Dolphin 9700 Mobile Mount, which holds a Dolphin terminal securely in place inside a vehicle, is an
ideal, low-cost alternative to the Dolphin 9700 Mobile Base when communications are not required. When
used in conjunction with the Dolphin 9700 Mobile Charger, the Dolphin 9700 Mobile Mount creates a
complete mounting and charging solution for in-transit applications. The entire kit includes an adjustable
vehicle mounting bracket.
Communication/Charging Cables
Dolphin communication/charging cable kits are an all-in-one solution for mobile applications. Each cable
kit powers the terminal, charges its main battery, and communicates with host or peripheral devices
without the need for a cradle. Cable kits can support RS232 or USB communications and are available
with U.K. or European power cords.
Protective Holster
Holsters provide convenient storage for terminals and protect them from damage in mobile environments.
Both holsters feature a front pocket that holds an extra battery, a side pocket to hold an extra stylus, and
a belt loop to secure the holster to a belt.
Protective Enclosure
Protective enclosures help seal and protect terminals from damage while providing full access to all
terminal parts and features. These
enclosures
feature a swivel clip on the back that enables you to secure
the enclosure to a belt. Enclosures also come with an adjustable shoulder strap for added convenience.
Stylus Kits
There are two stylus kits: one contains three styli and the other includes additional coiled tethers to secure
the stylus to the terminal, which helps prevent loss.
Li-ion Battery Pack
The 7.4V Li-ion rechargeable battery pack provides the main power for the terminal.
3 - 3
Front Panel: 9700
Key
Power
Front
Speaker
Navigation Keys
Indicator
Touch Panel Display
Recessed Keyboard
I/O
Connector
For a description of each callout, see Front Panel Features for the 9700 on page 3-5.
SCAN
LED
Key
3 - 4
Front Panel Features for the 9700
Blue Modifier Key
Front Speaker
I/O Connector
Indicator LED
Navigation Keys
Power Key
Recessed Keyboard
Red Modifier Key
SCAN Key
Touch Panel Display
See Using the Modifier Keys on page 5-3.
The front speaker is the receiver for handset voice calls. The speaker provides audio input to
the terminal when a headset is not plugged into the I/O Connector, page 3-10. When a headset
is plugged in, the terminal defaults to the microphone on the headset.
See I/O Connector on page 3-10.
The light emitting diode (LED) located at the top of the LCD display flashes and illuminates
during resets and scanning/imaging. This LED can be programmed by various software
applications.
The centrally-located navigation keys enable you to move and position the cursor through
software programs. The up and down arrows are programmed to perform specific functions
when pressed in combination with the Blue and Red modifier keys. For more details, see Using
the Navigation Keys on page 5-3.
The red power key puts the terminal in suspend mode or wakes the terminal from suspend
mode. See Suspend Mode on page 3-16.
There are two keyboard options: a 31-key numeric keyboard or a 45-key QWERTY keyboard.
For a complete overview of each keyboard, see Using the Keyboards on page 5-1.
See Using the Modifier Keys on page 5-3.
The SCAN key is centrally located for easy access with the right or left hand. When pressed,
the SCAN key activates the scanner/imager. The SCAN key also functions as a system wakeup control for the terminal.
The color 3.7 inch liquid crystal display (LCD) touch panel is covered with an industrial,
protective lens for greater durability. The video graphic array (VGA) display resolution is
480 X 640.
The 262K color (18 bit RGB) LCD uses thin film transistor (TFT) technology. The tough panel
backlight illuminates when the screen is touched, but not when the Backlight key is pressed.
For more information, see Backlight on page 6-8.
The touch panel can be activated by the stylus
information, see Using the Touch Panel on page 3-11.
(included
with the terminal) or a finger. For more
3 - 5
Back Panel: 9700
Image/Scan Engine
Window
Color Camera
Flashlight/Camera Flash
Color
Rear Speaker
Battery
IrDA
Port
Stylus Slot
For a description of each callout, see Back Panel Features for the 9700 on page 3-7.
Camera
Door
3 - 6
Back Panel Features for the 9700
Battery Door
Color Camera
Fastener for the Stylus Tether
Image/Scan Engine Window
Flashlight/Camera Flash
Memory Card Sockets
Rear Speaker
Stylus Slot
The battery door secures the Li-ion battery pack in the terminal’s battery well. For more
information, see Batteries on page 3-13.
Color camera with 2.0-Megapixels Resolution (1600 x 1200 pixel), Auto Focus and LED flash.
Stylus tethers can be purchased separately to help prevent accidental loss when the sylus is
not stored in the stylus slot. A stylus tether is a coiled, elastic cord that tethers the stylus to
the terminal. Secure one end of the cord to the back panel of the terminal and the other end
to the stylus.
The available image engines read and decode linear, stacked linear (e.g., PDF417), and 2D
matrix bar code symbologies. The available image engines contain a laser aimer for greater
accuracy. The laser apertures for the imaging engines’ laser aimers are contained behind this
window. For more details, see Using the Scan Image Engine on page 4-1.
The flashlight/camera flash is located on the back panel of the terminal. The flashlight is turned
on and off by pressing the Blue key + SCAN key. The flash is activated when using the
terminal’s color camera.
These sockets
provide
the user with the option to
industry-standard microSD or microSDHC memory interfaces. The expansion sockets are
located under the main battery in the battery well.
When the battery pack and battery door are properly installed, the memory card is sealed
against moisture and particle intrusion, read/write data is stored securely, and the terminal’s
environmental rating is preserved; see Installing a Memory Card on page 3-9.
The integrated speaker sounds audio signals as you scan bar code labels and enter data. The
integrated speaker also supports playback of wave and MP3 files, software mixer, WWAN/
GSM audio, and VoIP. The operating frequency range is 600-3000Hz at >90dB.
The stylus is used to operate the touch panel. The back panel of the terminal features a storage
slot to hold the stylus when not in use. The stylus features a special tip for added accuracy and
ease of use.
expand
the terminal’s
memory
capacity using
3 - 7
Side Panels: 9700
The left and the right side panels contain different features.
Left Side
Left Button
IrDA Port
Right Side
Right Button
Volume Button
Button
Left
When pressed, the Left Button key activates the scanner/imager.
The IrDA port enables infrared communication. The maximum data transfer speed is 115 kbps.
Note: The infrared LED aperture is located behind the scan engine window.
For more information about using this port, see Using the IrDA Port on page 7-2.
IrDA Port
Right Button
When pressed, the Right Button key activates the scanner/imager.
Press the up or down arrows on the volume button to raise or lower the volume of the main
speaker.
Slot
Stylus
Volume Button
3 - 8
Installing a Memory Card
1. Press the Power key to put the terminal in suspend mode; see Suspend Mode on page 2-11.
2. Remove the battery door and the battery.
3. Place the terminal on a flat, secure surface with the keyboard face down.
4. Unlock the access door to the microSD or microSDHC socket.
5. Lift the door up to expose the socket.
6. Insert the microSD or microSDHC card into the socket.
NEW
IMAGE
REQUIRED
NEW
IMAGE
REQUIRED
7. Close and lock the access door.
8. Install the battery and the battery door.
Installing a SIM Card
See To Install a SIM Card on page 8-2.
3 - 9
16
Bottom Panel: 9700
Pin
1
2
3
4
5
6
7
8
9
10
11
Description
GND
MIC_IN
RI
USB_DUSB_D+
NO CONNECT
USB_5V_IN
5V_OUT
TXD
RXD
RTS
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
12
CTS
13
DTR
14
DSR
15
16
MONO SPEAKER
VDC_IN
Note: Signals referenced are for a DTE device.
I/O Connector
The I/O connector powers the terminal, charges the main battery, and facilitates communication. All
Dolphin peripherals are designed to work exclusively with this connector.
The I/O connector supports RS232 and USB communication. For RS232, the maximum communication
speed is 115.2 Kbps with seven baud rate settings. For USB, the communication speed is up to 12 Mbps.
Powering Out
The I/O connector also provides power out (to peripheral devices) +5V at 500mA. This means that, with
the proper cable, the terminal can power another device. By default, power out is disabled. To enable
power out, alter the registry as follows:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial4]
Conn5Venable=1
3 - 10
Loading...