8600 Ring Scanner
Quick Start Guide
8600-QS Rev A
1/15
Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Para Português, acesse www.honeywellaidc.com.
Перейти на русскоязычный сайт www.honeywellaidc.com.
Pro češtinu jdi na www.honeywellaidc.com.
Pre slovenčinu choď na www.honeywellaidc.com.
Türkçe için lütfen www.honeywellaidc.com sayfasını ziyaret ediniz.
Idź na stronę : www.honeywellaidc.com po quick start w języku polskim.
如要到中国 www.honeywellaidc.com（简体）。
www.honeywellaidc.com
Laser Scanner.
1
2
3
4
1
2
3
4
5
1. Scan Window
2. Trigger
3. Ring Strap
4. Connector (connect to sled)
Laser Imager
1. Illumination LEDs
2. Scan Window
3. Trigger
4. Ring Strap
5. Connector (connect to sled)
Trigger Rotation
Left Hand
Right Hand
Scanner head
can be rotated
180°
Connect Scanner to Arm Mount Sled
Slide the ring scanner
cable connector into
the bottom of the sled
until the connector ring
clicks shut.
Attach Ring to Finger
Step 1 - Slide
finger into
loosened ring
strap
Step 2 Pull ring
strap to
secure
ring to
finger
Remove
Shipping
Film
The ring cable should not cross under the hand.
How to Scan a Bar Code
DANG ER
LASER
DO NOT STARE DIRECTLY
INTO THE LASER BEAM
Scan Beam Type
Ring Scanner
Ring Imager
Linear Bar Code
2D Bar Code
Bar Code Type
Correct
Incorrect
Incorrect Wrist Position
Incorrect Wrist Position
Correct
Wrist
Position
Wrist Position When Scanning
Remove Ring Strap Module
Step 2 - Press latch
down.
Step 1 - Turn 90°.
Step 3 - Remove the
ring strap module.
Replace Ring Strap Module
Step 3 - Turn 90°.
Step 1 - Connect
ring latch with
trigger catch.
Step 4 - Ready to
scan.
Step 2 - Press
together until a click
occurs.
Remove Trigger
Step 1 - Remove the
ring strap module.
Turn the trigger until
a black screw is
visible. Remove the
screw.
Step 2 - Turn the
trigger 180°.
Step 3 - Lift the
trigger up.
Step 1 - Lower the
trigger into the ring
strap module as
shown.
Step 2 - Turn the
trigger 180°.
Step 3 - Insert and
tighten the black
screw.
Step 4 - Replace
the ring strap
module.
Replace Trigger
Technical Assistance
Contact information for technical support, product service, and repair can be
found at www.honeywellaidc.com.
User Documentation
For localized versions of this document, and to download the User’s Guide,
go to www.honeywellaidc.com.
Limited Warranty
Refer to www.honeywellaidc.com/warranty_information for your product’s
warranty information.
Patents
For patent information, please refer to www.honeywellaidc.com/patents.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does
not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the
furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written
consent of HII.
2015 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Loading...