1991-EN-QS-01 Rev A
5/20
Agency Model: 1991i, 1991iSR, 1991iXR
Note: Refer to your User Guide for information about cleaning your device.
Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and powered up, put the scanner in the base to establish a link. The green LED on the base flashes to indicate the scanner’s battery or charge pack is charging.
Note: The power supply must be ordered separately, if needed.
1
USB:
Note: If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster.
2
3
4