Honeywell 1991i, 1991i SR, 1991i XR Quick Start Guide

Granit™ XP 1991i

Cordless Industrial Area-Imaging Scanner

Quick Start Guide

1991-EN-QS-01 Rev A

5/20

Agency Model: 1991i, 1991iSR, 1991iXR

Note: Refer to your User Guide for information about cleaning your device.

Getting Started

Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and powered up, put the scanner in the base to establish a link. The green LED on the base flashes to indicate the scanner’s battery or charge pack is charging.

Power Supply Assembly (if included)

Note: The power supply must be ordered separately, if needed.

1

Connecting the Base

USB:

Note: If you are charging the scanner using the USB cable, the current available for charging is reduced and charge times are increased. Charging via the power supply is faster.

2

Keyboard Wedge:

3

RS232 Serial Port:

4