Honda Power Equipment FG110 User Manual 2
A FEW WORDS ABOUT SAFETY
CONTENTS
Your safety , and the safety of others, is very important. And
using this tiller is an important responsibility.
To help you make informed decisions about safety, we
have provided operating procedures and other information
on labels and in this manual. This information alerts you to
potential hazards that could hurt you or others.
Of course, it is not practical or possible to warn you about
all the hazards associated with operating or maintaining a
tiller. You must use your own good judgment.
You will find important safety information in a variety of
forms, including:
• Safety Labels – on the tiller.
• Safety Messages – preceded by a safety alert symbol
and one of three words:
DANGER, WARNING, or CAUTION.
These signal words mean:
DANGER
You WILL be KILLED or
SERIOUSLY HURT if you
WARNING
don't follow instructions.
You CAN be KILLED or
SERIOUSLY HURT if you
CAUTION
don't follow instructions.
You CAN BE HURT if you
don't follow instructions.
• Safety Headings—such as IMPORTANT SAFETY
INFORMATION.
• Safety Section—such as TILLER SAFETY.
• Instructions—how to use this tiller correctly and safely.
This entire book is filled with important safety
information—please read it carefully.
TILLER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
IMPORTANT SAFETY INFORMATION. . . . . . . . . . . . . . . . 3
ATTACHMENTS AND MODIFICATIONS . . . . . . . . . . . . . . 3
IMPORTANT MESSAGE TO EMPLOYERS . . . . . . . . . . . . 3
IMPORTANT MESSAGE TO PARENTS. . . . . . . . . . . . . . . 3
SAFETY LABEL LOCATIONS. . . . . . . . . . . . . . . . . . . . . . . 4
CONTROLS & EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . .5
COMPONENT & CONTROL LOCATIONS . . . . . . . . . . . . . 5
DESCRIPTION OF CONTROLS . . . . . . . . . . . . . . . . . . . . . 6
BEFORE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
ARE YOU READY TO OPERATE THE TILLER? . . . . . . . . 8
IS YOUR WORKING AREA READY? . . . . . . . . . . . . . . . . . 8
IS YOUR TILLER READY TO GO?. . . . . . . . . . . . . . . . . . . 8
OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
SAFE OPERATING PRECAUTIONS. . . . . . . . . . . . . . . . . . 9
TILLER OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SERVICING YOUR TILLER . . . . . . . . . . . . . . . . . . . . . . . . .12
THE IMPORTANCE OF MAINTENANCE . . . . . . . . . . . . . 12
MAINTENANCE SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . 12
MAINTENANCE SCHEDULE . . . . . . . . . . . . . . . . . . . . . . 13
ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
FUEL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
TRANSMISSION LUBRICATION. . . . . . . . . . . . . . . . . . . . 20
SET-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
THE IMPORTANCE OF PROPER ASSEMBLY . . . . . . . . 21
IMPORTANT SAFETY PRECAUTIONS . . . . . . . . . . . . . . 21
UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ADDING OIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
BEFORE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
STORAGE-TRANSPORTING . . . . . . . . . . . . . . . . . . . . . . . .23
STORAGE PREPARATION. . . . . . . . . . . . . . . . . . . . . . . . 23
STORAGE PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . 24
REMOVAL FROM STORAGE . . . . . . . . . . . . . . . . . . . . . . 24
TRANSPORTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TAKING CARE OF UNEXPECTED PROBLEMS . . . . . . . . .25
ENGINE WILL NOT START. . . . . . . . . . . . . . . . . . . . . . . . .25
LOW POWER OR SPEED WILL NOT INCREASE . . . . . . .25
TILLER TINES (OR ATTACHMENT) WON’T STOP TURNING
WHEN THROTTLE IS AT SLOW POSITION . . . . . . . . . . .25
TECHNICAL & CONSUMER INFORMATION . . . . . . . . . . . .26
SERIAL NUMBER LOCATIONS . . . . . . . . . . . . . . . . . . . . 26
CARBURETOR MODIFICATIONS FOR HIGH
ALTITUDE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . 26
EMISSIONS CONTROL SYSTEM INFORMATION. . . . . . 27
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
TUNEUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CONSUMER INFORMATION . . . . . . . . . . . . . . . . . . . . . . .29
2 ENGLISH
INTRODUCTION
Congratulations on your selection of a Honda FG1 10 Mini-T iller. We are certain you will be pleased with your purchase of
one of the finest tillers on the market.
We want to help you get the best results from your new tiller and to operate it safely . This manual cont ains the information
on how to do that; please read it carefully.
As you read this manual, you will find information preceded by a symbol. That information is intended to help
you avoid damage to your tiller, other property, or the environment.
When your tiller needs scheduled maintenance, keep in mind that your Honda servicing dealer is specially trained in
servicing Honda tillers. Your Honda servicing dealer is dedicated to your satisfaction, and will be pleased to answer your
questions and concerns.
Left and right sides of the unit are determined from the operator’s position, standing behind the tiller handlebars, facing
the direction of forward travel.
Keep this owner’s manual handy, so you can refer to it any time. This owner’s manual is considered a permanent part of
the tiller and should remain with the tiller if resold.
Best Wishes,
Honda Power Equipment
NOTICE
ENGLISH
Honda Power Equipment Manufacturing Co., Inc., reserves the right to discontinue or change specifications or design at any time
without notice and without incurring any obligation whatever. No part of this publication may be reproduced without written permission.
ENGLISH 1
TILLER SAFETY
IMPORTANT SAFETY INFORMATION
Most accidents can be prevented if you follow all instructions in
this manual and on the tiller. The most common hazards,
according to accident statistics, are discussed below, along with
the best way to protect yourself and others.
Honda Tiller Usage
Honda tillers are designed to give safe and dependable service if
operated according to instructions and intended use.
Honda tillers are intended to be used by an experienced, trained
operator who is familiar with the use of power equipment. Do not
allow a child or an inexperienced, untrained operator to use this
tiller. Operating this equipment requires special ef fort on your p art
to ensure your safety and the safety of others. Read and
understand this owner’s manual.
Avoid Rotating Tines
The rotating tines can cause injury. Keep away from the tine
shield whenever the engine is running. If you need to adjust the
tines or work around the tines for any reason, always stop the
engine. Disconnect the spark plug cap if you need to clean or
handle the tines.
Clear Tilling Area
The tiller tines can throw rocks and other objects with enough
force to cause injury. Before tilling, carefully inspect the area and
remove all large debris.
Keep Shields in Place
Guards and shields are designed to protect you from being hit by
thrown objects. They also help protect you from hot engine parts
and moving components. For your safety and the safety of others,
keep all guards and shields in place when operating the tiller.
Refuel with Care
Gasoline is extremely flammable and gasoline vapor can explode.
Refuel only outdoors, in a well-ventilated area, with the engine off.
Never smoke near gasoline, and keep other flames and sparks
away. Always store gasoline in an approved container.
Wear Protective Clothing
Wearing protective clothing will reduce your risk of injury. Long
pants and eye protection reduce the risk of injuries from thrown
objects. Sturdy shoes with aggressive soles will help protect your
feet and give you better traction on slopes or uneven ground.
Clothing worn by the operator should be close-fitting. Loose
clothing should not be permitted because it may get caught in
moving parts. Tie up or restrain long hair.
Turn Engine Off When Not Tilling
If you need to leave the tiller for any reason, even just to inspect
the area ahead, always stop the engine.
ATTACHMENTS AND MODIFICATIONS
Do not make any modifications to your tiller. Modifying your tiller,
or installing non-Honda attachments, can make your tiller unsafe.
If you need attachments for your tiller, use only genuine Honda
attachments. These products have been designed for your tiller.
Non-Honda attachments are usually designed for universal
applications. Although aftermarket attachments may fit on your
tiller, they may not meet factory specifications and could make
your tiller unsafe.
IMPORTANT MESSAGE TO EMPLOYERS
As an employer, you have special responsibilities to the people
who work for you.
Before you ask anyone to operate this tiller, you need to
determine whether the person is old enough, large enough, and
strong enough to safely handle and control the tiller. If you decide
the person is, make sure the employee reads and understands all
instructions and warnings in this manual, and on the labels before
operating the tiller.
Allow adequate time for hands-on training by a qualified instructor,
and personally supervise practice sessions until you feel sure the
employee is ready to operate the tiller.
Also, be sure employees wear proper clothing and have eye
protection and any other gear that may be required by local
ordinances or your insurance company.
Remember, too, that you are responsible for keeping the tiller
properly maintained and in safe operating condition.
Your commitment to safety on the job can help prevent accidents
and result in longer and more productive years of service.
IMPORTANT MESSAGE TO PARENTS
Y our child’ s safety is very important to Honda. Read this message
if you decide to permit your child to operate this tiller. Tillers are
tools, not toys. As with any equipment, bad judgements can result
in serious injuries. You can prevent accidents by making good
decisions about if, when, and how your child operates this
equipment.
The first question you’ll need to ask is whether your child is
capable of operating this tiller safely. Remember, young people
vary widely, and AGE IS NOT THE ONLY FACTOR. Physically, a
child must be LARGE ENOUGH AND STRONG ENOUGH to
easily start the tiller and control its direction. The child also needs
enough size, strength, and coordination to comfortably reach and
operate the controls.
Another, tougher question you need to ask is if your child has
enough MA TURITY AND RESPONSIBILITY to safely operate this
tiller. Does the young person think through problems and come to
logical solutions? Anyone who takes unnecessary risks and does
not obey rules should not operate this tiller.
If you decide that your child can handle the tiller safely, carefully
read the owner’s manual with him or her. Make sure you both
understand all instructions and safety information. Also, be sure
your child wears sturdy shoes and other protective clothing when
operating or handling the tiller.
SUPERVISION is also very important. Walk with your child during
the first few minutes of tilling. Even after he or she has become
confident with the tiller, do not let the child use the tiller without
good adult supervision. An adult should also be present during
refueling and maintenance. In fact, it’s up to the adult owner to
make sure the tiller is properly maintained and kept in safe
operating condition.
By always placing safety first, your child will acquire useful skills
and a sense of accomplishment. And you’ll both get the best
results from your tiller.
ENGLISH 3
TILLER SAFETY
SAFETY LABEL LOCATIONS
The labels shown here contain important safety information. Please read them carefully . These labels are considered permanent part s of
your Honda tiller. If a label comes off or becomes hard to read, contact an authorized Honda servicing dealer for a replacement.
Letter Marking Meaning
A
Read and understand the owner’s manual and the
operation of all controls before using the machine.
Carbon monoxide gas is toxic. Breathing it can cause
unconsciousness and even kill you. Never run the
engine in a closed, or even partly closed, area where
people may be present.
PRODUCT IDENTIFICATION PLATE
1. Permissible sound power level according to
Directive 2000/14/EC.
2. Conformity mark, according to the
EEC/89/392 modified Directive.
3. Nominal power in kilowatts.
B
Contact with rotating tines will cause serious injury.
Keep hands, feet, and clothing away while the engine
is running.
4. Year of manufacture.
5. Weight in kilograms.
6. Serial number.
7. Model.
8. Manufacturer’s name and address.
4 ENGLISH
COMPONENT & CONTROL LOCATIONS
[1]
[2]
[3]
CONTROLS & EQUIPMENT
A Safety label (page 4)
B Identification plate (page 4)
1 Engine switch
2 Throttle lever
3 Handlebar knobs
4 Choke lever
5 Priming bulb
6 Air cleaner
7 Fuel cap
8 Transport wheels (drag bar not shown)
9 Tilling tines
10 Tine shield
11 Engine oil filler cap/engine oil drain
12 Carrying handle
13 Recoil starter grip
[4]
[13]
[12]
[A]
[5]
[6]
[11]
[7]
[8]
[B]
[10]
[9]
ENGLISH 5
CONTROLS & EQUIPMENT
OFF ON OFF
DESCRIPTION OF CONTROLS
Throttle Lever
The throttle lever [1] controls engine speed and tiller tine
rotation.
Pulling the throttle lever towards the grip increases the engine
speed, which causes the tines to turn. Releasing the throttle
lever reduces engine speed and stops the tiller tines from
turning.
The tiller will have the greatest tilling force at maximum engine
speed. At idle, the tilling tines should stop rotating.
Engine Switch
The engine switch [2] controls the ignition system.
The engine switch must be in the ON position for the engine to
start and run. Moving the engine switch to the OFF position
stops the engine.
[2]
[1]
Choke Lever
The choke lever [1] opens and closes the choke valve in the
carburetor.
The CLOSED () position (choke lever up) enriches the fuel
mixture for starting a cold engine. The OPEN position (choke
lever down) provides the correct fuel mixture for operation after
starting, and for restarting a warm engine.
Priming Bulb
Pressing the priming bulb [2] pumps fuel from the fuel tank to
the carburetor. This procedure is necessary for starting a cold
engine and after refueling an engine that has run out of fuel.
To ensure that fuel has reached the carburetor, press the
priming bulb repeatedly until fuel can be seen in the clear
plastic fuel-return tube [3].
[1]
[2]
[3]
6 ENGLISH
Transport Wheels
The transport wheels [1] are used to move the tiller around.
Before tilling, the transport wheels must be removed and the
drag bar [4] installed in their place.
Carrying Handle
Hold the carrying handle [2] when starting the engine.
The carrying handle can be used to load/unload the tiller, and
to assist in certain engine maintenance procedures.
Recoil Starter Grip
Pulling the starter grip [3] operates the recoil starter to crank
the engine for starting.
Drag Bar
The drag bar [4] is used to control the forward action of the
turning tiller tines. The drag bar can be adjusted to control the
tilling depth of the tines.
CONTROLS & EQUIPMENT
[2]
[1]
[3]
Narrow Cultivating
The two outer tines can be removed to give you a narrower
cultivating width. This gives you the ability to get between very
closely spaced plants.
[4]
ENGLISH 7
BEFORE OPERATION
ARE YOU READY TO OPERATE THE TILLER?
Your safety is your responsibility. A little time spent in
preparation will significantly reduce your risk of injury.
Knowledge
Read and understand this manual. Know what the controls
do and how to operate them.
Familiarize yourself with the tiller and its operation before
you begin to use it. Know what to do in case of
emergencies.
Physical and Mental Readiness
Y ou must be alert and in good physical condition to operate
the tiller. Do not operate the tiller if you are tired, ill, or
under the influence of alcohol, medication, or any
substance that might impair your vision, dexterity, or
judgment.
If you have any physical problem that may be aggravated
by strenuous work, consult your physician before operating
the tiller.
Protective Clothing
Wearing protective clothing will reduce your risk of injury.
Do not wear loose clothing, jewelry , short pants, sandals, or
go barefoot. Secure hair so it is above shoulder level.
Hand and Body Protection
Wear gloves, a long-sleeved shirt, and long pants made of
heavy material. Clothing should fit closely but allow
freedom of movement, and should have no strings, straps,
etc. that could catch on brush or the tiller. Keep clothing
fastened.
Foot Protection
Wear sturdy work boots with good toe protection and
nonslip soles.
IS YOUR WORKING AREA READY?
Objects thrown by the tiller can cause serious injury . Before
operating the tiller, carefully inspect the area, and remove
all objects that could be thrown by, or entangled in, the
tilling attachment, such as rocks, broken glass, nails, wire,
or string.
Never operate the tiller without good visibility or light.
Clear the area of children, bystanders, and pets. Keep all
children, bystanders, and pets at least 50 feet (15 meters)
away from where the tiller is being operated.
If anyone approaches you while you are operating the tiller,
release the throttle lever and stop the engine.
IS YOUR TILLER READY TO GO?
For your safety, and to maximize the service life of your
equipment, it is very important to take a few moments
before you operate the tiller to check its condition. Be sure
to take care of any problem you find, or have your servicing
dealer correct it, before you operate the tiller.
WARNING
Improperly maintaining this tiller, or failing to
correct a problem before operation, could
cause a malfunction in which you could be
seriously injured.
Always perform a pre-operation inspection
before each operation, and correct any
problem.
Safety Inspection
• Look around the engine for signs of oil or gasoline leaks.
Wipe up any spills before starting the engine.
• Replace any damaged parts.
• Check that all fasteners are in place and secure. Tighten
as necessary.
Tiller Tine Inspection
• Look for signs of damage to the tilling tines (or any
accessory installed). Replace any tiller tines and parts
that are worn out, bent, cracked, chipped, or damaged in
any way.
• Make sure the tiller accessory is properly installed and
securely fastened (see attachment installation
instructions).
• Check that the debris shield is securely installed and in
good condition.
Maintenance Inspection
• Check the oil level (see page 14). Running the engine
with a low oil level can cause engine damage.
• Check the air filter (see page 15). A dirty air filter will
restrict air flow to the carburetor, reducing engine and
tiller performance.
• Check throttle operation (see page 17). The throttle must
operate smoothly for good throttle control.
• Check the fuel level (see page 18). Starting with a full
tank will help to eliminate or reduce operating
interruptions for refueling.
8 ENGLISH
SAFE OPERATING PRECAUTIONS
OPERATION
Before operating the tiller for the first time, please review
the IMPORTANT SAFETY INFORMATION on page 3 and
BEFORE OPERATION chapter starting on page 8.
Even if you have operated other tillers, take time to become
familiar with the operation of this tiller’s controls and
handling.
For your safety , avoid starting or operating the engine in an
enclosed area, such as a garage. Your engine’s exhaust
contains poisonous carbon monoxide gas that can collect
rapidly in an enclosed area and cause illness or death.
If the tiller starts to shake or vibrate, stop the engine
immediately. After the tiller tines have completely stopped,
inspect them to determine the cause of the vibration.
Sudden vibration is a sign of a hazardous problem, such as
loose or damaged tilling tines (or tiller attachment), hidden
objects in the soil, or ground that is too hard to till. Do not
operate the tiller until the problem is corrected.
Prolonged exposure to vibration may cause vibration
syndrome (Raynaud’s disease). Symptoms include loss of
skin color in the hands and numbness or a painful tingling
sensation in the fingers, hands, and arms. Regular users of
any power equipment may feel the numbness or pain
spontaneously, at any time, not just after using the
equipment. If any of these symptoms occur, see a
physician immediately.
Moving the Tiller
Do not move the tiller with the engine running.
The tiller has transport wheels [3] to allow easy
maneuvering to and from the work area. Install the
transport wheels by inserting the wheel bar up through the
transmission housing.
Before tilling, remove the lock pin [1], clevis pin [2], and
transport wheels [3] and install the drag bar.
[1]
[2]
6 x 25 mm
[3]
Drag Bar Installation
1. Make sure the engine is OFF before installing the drag
bar.
2. Remove the lock pin [1] and the clevis pin [2].
3. Remove the wheel assembly [3].
4. Install the drag bar [4] with the pointed edge of the drag
bar towards the tiller tines using the 6 x 25 mm clevis
pin and lock pin.
5. When your tilling job is completed, reinstall the transport
wheels in the reverse order of removal.
[4]
ENGLISH 9
Loading...