Honda CTX700A Owner's Manual
This manual should be considered a permanent part of the motorcycle
and should remain with the motorcycle when it is resold.
This publication includes the latest production information available
before printing. Honda Motor Co., Ltd. reserves the right to make
changes at any time without notice and without incurring any obligation.
No part of this publication may be reproduced without written
permission.
The vehicle pictured in this owner’s manual may not match your actual
vehicle.
© 2013 Honda Motor Co., Ltd.
Welcome
Congratulations on your purchase of a new
Honda motorcycle. Your selection of a
Honda makes you part of a worldwide family
of satisfied customers who appreciate
Honda’s reputation for building quality into
every product.
To ensure your safety and riding pleasure:
● Read this owner’s manual carefully.
● Follow all recommendations and
procedures contained in this manual.
● Pay close attention to safety messages
contained in this manual and on the
motorcycle.
● The following codes in this manual indicate
each country.
● The illustrations here in are based on the
CTX700A ED type.
Country Codes
Code Country
CTX700A
E UK
ED European direct sales
KO Korea
U Australia, New Zealand
CTX700D
E UK
ED European direct sales
U Australia, New Zealand
*The specifications may vary with each locale.
A Few Words About Safety
3
DANGER
3
WARNING
3
CAUTION
NOTICE
Your safety, and the safety of others, is very
important. Operating this motorcycle safely is
an important responsibility.
To help you make informed decisions about
safety, we have provided operating
procedures and other information on safety
labels and in this manual. This information
alerts you to potential hazards that could
hurt you or others.
Of course, it is not practical or possible to
warn you about all hazards associated with
operating or maintaining a motorcycle. You
must use your own good judgment.
You will find important safety information in
a variety of forms, including:
● Safety labels on the motorcycle
● Safety Messages preceded by a safety alert
symbol and one of three signal words:
DANGER, WARNING, or CAUTION.
These signal words mean:
You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
You CAN be HURT if you don’t follow
instructions.
Other important information is
provided under the following titles:
Information to help you avoid
damage to your motorcycle, other
property, or the environment.
Contents
Motorcycle Safety P. 2
Operation Guide P. 18
Maintenance P. 47
Troubleshooting P. 94
Information P. 115
Specifications P. 128
Index P. 131
Motorcycle Safety
This section contains important information for safe riding of your motorcycle.
Please read this section carefully.
Safety Guidelines .........................................P. 3
Image Labels.................................................P. 6
Safety Precautions .....................................P. 11
Riding Precautions .....................................P. 12
Accessories & Modifications......................P. 16
Loading .......................................................P. 17
Safety Guidelines
Motorcycle Safety
Safety Guidelines
Follow these guidelines to enhance your safety:
● Perform all routine and regular inspections
specified in this manual.
● Stop the engine and keep sparks and flame
away before filling the fuel tank.
● Do not run the engine in enclosed or partly
enclosed areas. Carbon monoxide in exhaust
gases is toxic and can kill you.
Always Wear a Helmet
It’s a proven fact: helmets and protective
apparel significantly reduce the number and
severity of head and other injuries. So always
wear an approved motorcycle helmet and
protective apparel.
2 P. 11
Before Riding
Make sure that you are physically fit, mentally
focused and free of alcohol and drugs. Check
that you and your passenger are both wearing
an approved motorcycle helmet and protective
apparel. Instruct your passenger on holding
onto the grab rails or your waist, leaning with
you in turns, and keeping their feet on the
footpegs, even when the motorcycle is stopped.
Take Time to Learn & Practice
Even if you have ridden other motorcycles,
practice riding in a safe area to become familiar
with how this motorcycle works and handles,
and to become accustomed to the motorcycle’s
size and weight.
Ride Defensively
Always pay attention to other vehicles around
you, and do not assume that other drivers see
you. Be prepared to stop quickly or perform an
evasive maneuver.
continued
3
Safety Guidelines
Motorcycle Safety
Make Yourself Easy to See
Make yourself more visible, especially at night,
by wearing bright reflective clothing,
positioning yourself so other drivers can see
you, signaling before turning or changing lanes,
and using your horn when necessary.
Ride within Your Limits
Never ride beyond your personal abilities or
faster than conditions warrant. Fatigue and
inattention can impair your ability to use good
judgement and ride safely.
Don’t Drink and Ride
Alcohol and riding don’t mix. Even one
alcoholic drink can reduce your ability to
respond to changing conditions, and your
reaction time gets worse with every additional
drink. Don’t drink and ride, and don’t let your
friends drink and ride either.
4
Keep Your Honda in Safe Condition
It’s important to keep your motorcycle properly
maintained and in safe riding condition.
Inspect your motorcycle before every ride and
perform all recommended maintenance. Never
exceed load limits (
your motorcycle or install accessories that
would make your motorcycle unsafe (
2 P. 17), and do not modify
2 P. 16).
If You are Involved in a Crash
Personal safety is your first priority. If you or
anyone else has been injured, take time to
assess the severity of the injuries and whether it
is safe to continue riding. Call for emergency
assistance if needed. Also follow applicable
laws and regulations if another person or
vehicle is involved in the crash.
If you decide to continue riding, first evaluate
the condition of your motorcycle. If the engine
is still running, turn it off. Inspect for fluid leaks,
Safety Guidelines
Motorcycle Safety
3
WARNING
check the tightness of critical nuts and bolts,
and check the handlebar, control levers, brakes,
and wheels. Ride slowly and cautiously.
Your motorcycle may have suffered damage
that is not immediately apparent. Have your
motorcycle thoroughly checked at a qualified
service facility as soon as possible.
Carbon monoxide gas is toxic.
Breathing it can cause
unconsciousness and even kill you.
Avoid any areas or activities that
expose you to carbon monoxide.
Carbon Monoxide Hazard
Exhaust contains poisonous carbon monoxide,
a colourless, odorless gas. Breathing carbon
monoxide can cause loss of consciousness and
may lead to death.
If you run the engine in confined or even partly
enclosed area, the air you breathe could contain
a dangerous amount of carbon monoxide.
Never run your motorcycle inside a garage or
other enclosure.
5
Image Labels
Motorcycle Safety
Except KO type
Image Labels
The following pages describe the label
meanings. Some labels warn you of
potential hazards that could cause serious
injury. Others provide important safety
information. Read this information carefully
and don’t remove the labels.
If a label comes off or becomes hard to read,
contact your dealer for a replacement.
There is a specific symbol on each label.
The meanings of each symbol and label are
as follows.
6
Read instructions contained in Owner’s
Manual carefully.
Read instructions contained in Shop Manual
carefully. In the interest of safety, take the
motorcycle to be serviced only by your dealer.
DANGER (with RED background)
You WILL be KILLED or SERIOUSLY HURT if
you don’t follow instructions.
WARNING (with ORANGE background)
You CAN be KILLED or SERIOUSLY HURT if
you don’t follow instructions.
CAUTION (with YELLOW background)
You CAN be HURT if you don’t follow
instructions.
Image Labels
Motorcycle Safety
BATTERY LABEL
DANGER
• Keep flame and spark away from the battery.
Battery produce explosive gas that can cause
explosion.
• Wear the eye protection and rubber gloves when
handling the battery, or you can get burned or
lose your eyesight by the battery electrolyte.
• Do not allow children and other people to touch
a battery unless they understand proper
handling and hazards of the battery very well.
• Handle the battery electrolyte with extreme care
as it contains dilute sulfuric acid. Contact with
your skin or eyes can burn you or cause loss of
your eyesight.
• Read this manual carefully and understand it
before handling the battery. Neglect of the
instructions can cause personal injury and
damage to the motorcycle.
• Do not use a battery with the electrolyte at or
below the lower level mark. It can explode
causing serious injury.
continued
7
Image Labels
Motorcycle Safety
RADIATOR CAP LABEL
DANGER
NEVER OPEN WHEN HOT.
Hot coolant will scald you.
Relief pressure valve begins to open at 108 kPa.
ACCESSORIES AND LOADING WARNING LABEL
WARNING
ACCESSORIES AND LOADING
• The safety stability and handling of this motorcycle may be
affected by the addition of accessories and luggage.
• Read carefully the instructions contained in user’s manual and
installation guide before installing any accessory.
• The total weight of accessories and luggage added to rider’s and
passenger’s weight should not exceed 190 kg (419 lb), which is
the maximum weight capacity.
• The luggage weight must not exceed 15.5 kg (34 lb) under any
circumstances.
• The fitting of large fork-mounted or large handlebar mounted
fairing is not recommended.
8
Image Labels
Motorcycle Safety
REAR CUSHION LABEL
GAS FILLED
Do not open. Do not heat.
TYRE INFORMATION LABEL
Cold tyre pressure:
[Driver only]
Front 250 kPa (2.50 kgf/cm2, 36 psi)
Rear 250 kPa (2.50 kgf/cm2, 36 psi)
[Driver and passenger]
Front 250 kPa (2.50 kgf/cm2, 36 psi)
Rear 290 kPa (2.90 kgf/cm2, 42 psi)
Tyre size:
Front 120/70ZR17M/C (58W)
Rear 160/60ZR17M/C (69W)
Tyre brand: BRIDGESTONE METZELER
Front BT023F G ROADTEC Z8 INTERACT E
Rear BT023R G ROADTEC Z8 INTERACT
continued
9
Image Labels
Motorcycle Safety
10
SAFETY REMINDER LABEL
For your protection, always wear helmet, protective apparel.
FUEL LABEL
Unleaded petrol only
DRIVE CHAIN LABEL
Keep chain adjusted and lubricated.
25 to 35 mm (1.0 to 1.4 in) Freeplay
CARGO LIMIT LABEL
Do not exceed 0.5 kg (1.0 lb)
Safety Precautions
Motorcycle Safety
3
WARNING
Safety Precautions
● Ride cautiously and keep your hands on the
handlebar and feet on the footpegs.
● Keep passenger’s hands onto the grab rails or
your waist, passenger’s feet on the footpegs
while riding.
● Always consider the safety of your passenger,
as well as other drivers and riders.
Protective Apparel
Make sure that you and any passenger are
wearing an approved motorcycle helmet, eye
protection, and high-visibility protective
clothing. Ride defensively in response to
weather and road conditions.
Helmet
❙
Safety-standard certified, high-visibility, correct
size for your head
● Must fit comfortably but securely, with the
chin strap fastened
● Face shield with unobstructed field of vision
or other approved eye protection
Not wearing a helmet increases the
chance of serious injury or death in a
crash.
Make sure that you and any passenger
always wear an approved helmet and
protective apparel.
Gloves
❙
Full-finger leather gloves with high abrasion
resistance
Boots or Riding Shoes
❙
Sturdy boots with non-slip soles and ankle
protection
Jacket and Trousers
❙
Protective, highly visible, long-sleeved jacket
and durable trousers for riding (or a protective
suit).
11
Riding Precautions
Motorcycle Safety
Riding Precautions
Running-in Period
During the first 500 km (300 miles) of running,
follow these guidelines to ensure your
motorcycle’s future reliability and performance.
● Avoid full-throttle starts and rapid
acceleration.
● Avoid hard braking and rapid down-shifts.
● Ride conservatively.
12
Brakes
Observe the following guidelines:
● Avoid excessively hard braking and sudden
shifting to a lower gear.
u Sudden braking can reduce the
motorcycle’s stability.
u Where possible, reduce speed before
turning; otherwise you risk wheel slippage.
● Exercise caution on low traction surfaces.
u The tyres slip more easily on such surfaces
and braking distances are longer.
● Avoid continuous braking.
u Repeated braking, such as when
descending long, steep slopes can
seriously overheat the brakes, reducing
their effectiveness. Use engine braking
with intermittent use of the brakes to
reduce speed.
Riding Precautions
Motorcycle Safety
Anti-lock Brake System (ABS)
❙
This model is equipped with an Anti-lock Brake
System (ABS) designed to help prevent the
brakes from locking up during hard braking.
● ABS does not reduce braking distance. In
certain circumstances, ABS may result in a
longer stopping distance.
● ABS does not function at speeds below 10
km/h (6 mph).
● The brake lever and pedal may recoil slightly
when applying the brakes. This is normal.
● Always use the recommended tyres to ensure
correct ABS operation.
Engine Braking
❙
Engine braking helps slow your motorcycle
down when you release the throttle. For further
slowing action, downshift to a lower gear. Use
engine braking with intermittent use of the
brakes to reduce speed when descending long,
steep slopes.
Wet or Rainy Conditions
❙
Road surfaces are slippery when wet, and wet
brakes further reduce braking efficiency.
Exercise extra caution when braking in wet
conditions.
If the brakes get wet, apply the brakes while
riding at low speed to help them dry.
continued
13
Riding Precautions
Motorcycle Safety
Parking
● Park on a firm, level paved surface.
● If you must park on a slight incline or loose
surface, park so that the motorcycle cannot
move or fall over.
● Make sure that high-temperature parts
cannot come into contact with flammable
materials.
● Do not touch the engine, muffler, brakes and
other high-temperature parts until they cool
down.
● To reduce the likelihood of theft, always lock
the handlebar and remove the key when
leaving the motorcycle unattended.
Use of an anti-theft device is also
recommended.
14
Parking with the Side Stand
❙
1.
Stop the engine.
2.
Push the side stand down.
3.
Slowly lean the motorcycle to the left until its
weight rests on the side stand.
4.
Turn the handlebar fully to the left.
u Turning the handlebar to the right reduces
stability and may cause the motorcycle to
fall.
5.
Turn the ignition switch to the LOCK position
and remove the key.
2 P. 31
Riding Precautions
Motorcycle Safety
Refuelling and Fuel Guidelines
Follow these guidelines to protect the engine
and catalytic converter:
● Use only unleaded petrol.
● Use recommended octane number. Using
lower octane petrol will result in decreased
engine performance.
● Do not use fuels containing a high
concentration of alcohol.
● Do not use stale or contaminated petrol or an
2 P. 120
oil/petrol mixture.
● Avoid getting dirt or water in the fuel tank.
15
Accessories & Modifications
Motorcycle Safety
3
WARNING
Accessories &
Modifications
We strongly advise that you do not add any
accessories that were not specifically designed
for your motorcycle by Honda or make
modifications to your motorcycle from its
original design. Doing so can make it unsafe.
Modifying your motorcycle may also void your
warranty and make your motorcycle illegal to
operate on public roads and highways. Before
deciding to install accessories on your
motorcycle be certain the modification is safe
and legal.
16
Improper accessories or modifications
can cause a crash in which you can be
seriously hurt or killed.
Follow all instructions in this owner’s
manual regarding accessories and
modifications.
Do not pull a trailer with, or attach a sidecar to,
your motorcycle. Your motorcycle was not
designed for these attachments, and their use
can seriously impair your motorcycle’s handling.
Motorcycle Safety
Loading
3
WARNING
Loading
● Carrying extra weight affects your
motorcycle’s handling, braking and stability.
Always ride at a safe speed for the load you
are carrying.
● Avoid carrying an excessive load and keep
within specified load limits.
2 Maximum weight capacity / Maximum
luggage weight P. 128
● Tie all luggage securely, evenly balanced and
close to the centre of the motorcycle.
● Do not place objects near the lights or the
muffler.
Overloading or improper loading can
cause a crash and you can be seriously
hurt or killed.
Follow all load limits and other
loading guidelines in this manual.
17
Operation Guide
Parts Location
Rear brake fluid reservoir (P78)
Centre lower cowl (P66)
Front brake fluid reservoir (P78)
Throttle grip (P90)
Engine oil fill cap/dipstick (P70)
Engine oil filter (P73)
Coolant reserve tank (P76)
Battery (P69)
Main fuse (P114)
Front brake lever
Rear brake pedal
Right under cowl lid (P65)
Brake light switch (P93)
CTX700A
18
Operation Guide
Shift lever (P36)
Side stand (P81)
Fuel fill cap (P42)
Clutch lever (P87)
Seat (P64)
Drive chain (P82)
Shelter pocket (P44)
Fuse box (P113)
Crankcase breather (P91)
Engine oil drain bolt (P72)
continued
19
Parts Location (Continued)
Operation Guide
Rear brake fluid reservoir (P78)
Centre lower cowl (P66)
Front brake fluid reservoir (P78)
Throttle grip (P90)
Engine oil fill cap/dipstick (P71)
Engine oil filter (P73)
Coolant reserve tank (P76)
Battery (P69)
Main fuse (P114)
Front brake lever
Rear brake pedal
Right under cowl lid (P65)
Brake light switch (P93)
Clutch oil filter (P74)
Right under cowl (P67)
CTX700D
20
Operation Guide
Side stand (P81)
Fuel fill cap (P42)
Seat (P64)
Drive chain (P82)
Shelter pocket (P44)
Fuse box (P113)
Crankcase breather (P91)
Engine oil drain bolt (P72)
Parking brake lever (P32)
21
Operation Guide
Instruments
Display Check
When the ignition switch is turned on, all the mode and digital segments
will show.
If any part of these displays does not come on when it should, have your
dealer check for problems.
B button
A button
22
Operation Guide
Odometer [TOTAL] & Tripmeter
[TRIP A/B]
A button switches between
odometer & tripmeters at the
ordinary display.
• Odometer: Total distance ridden.
• Tripmeter: Distance ridden since
tripmeter was reset (press and
hold the B button to reset to 0.0
km/mile).
Tachometer
NOTICE
Do not operate the engine in the tachometer
red zone. Excessive engine speed can
adversely affect engine life.
Clock (12-hour display)
To set the clock:
(P27)
Fuel gauge
Remaining fuel when only
1st (E) segment starts flashing:
approximately 3.7 litres
(0.98 US gal, 0.81 Imp gal)
Speedometer
If the fuel gauge indicator repeat
flashing or turned off:
(P100)
Tachometer red zone
(excessive engine rpm range)
CTX700A
continued
23
Instruments (Continued)
Operation Guide
Clock (12-hour display)
To set the clock:
(P27)
CTX700D
Odometer [TOTAL] & Tripmeter
[TRIP A/B]
A button switches between
odometer & tripmeters at the
ordinary display.
• Odometer: Total distance ridden.
• Tripmeter: Distance ridden since
tripmeter was reset (press and
hold the B button to reset to 0.0
km/mile).
Tachometer
NOTICE
Do not operate the engine in the tachometer
red zone. Excessive engine speed can
adversely affect engine life.
Fuel gauge
Remaining fuel when only
1st (E) segment starts flashing:
approximately 3.7 litres
(0.98 US gal, 0.81 Imp gal)
Speedometer
If the fuel gauge indicator repeat
flashing or turned off:
(P100)
Tachometer red zone
(excessive engine rpm range)
24
Operation Guide
D indicator
Comes on when the D mode is selected in the AT MODE. (P40)
S indicator
Comes on when the S mode is selected in the AT MODE. (P40 )
Gear position indicator
The gear position is shown in the gear position indicator when the D, S mode or MT MODE
are selected.
u “-” appears for a few seconds and then goes off when the engine starts.
u “-” flashes when the engine stop switch position is changed from (Run) to (Off) position
with the ignition switch on.
u “-” flashes when the ignition switch is turned on with the engine stop switch (Off) position.
The indicator may flash if:
u The front wheel leaves the ground.
u You turn the wheel while the motorcycle is upright on the stand.
This is normal. To operate the system again, turn the ignition switch off, then on again.
If the “-” indicator is blinking in the gear position window while riding: (P99)
continued
25
Instruments (Continued)
Operation Guide
E type only
Ordinary display
Backlight brightness adjustment
Clock setting
Changing of speed and mileage unit
Press and hold the A button and B button
Press the A button
Except E type
Press the A button
E type only
Display setting
Display Setting
You can adjust the three settings.
• Backlight brightness adjustment
• Clock setting
• Changing of speed and
mileage unit
In addition, to return to the ordinary display
at display setting.
• The button is not pressed for about 30
seconds
• Turn the ignition switch off and then on
Each setting will be cancelled if the A button
is not pressed.
1 Backlight brightness adjustment:
You can adjust the brightness to one of three
levels.
!a Turn the ignition switch to ON.
Press and hold the A button and B button until
!b
the minute digit displays the brightness level.
!c
Press the B button. The brightness is switched.
26
!d Press the A button. The backlight is set, and
then the display moves to the clock setting.
Operation Guide
2 To set the clock:
Except E type
E type only
E type only
!a After backlight brightness adjustment, the
hour digits start flashing.
!b Press the B button until the desired hour and
AM/PM are displayed.
u Press and hold to advance the hour fast.
!e
Press the A button. The clock is set, and
then the display returns to the backlight
brightness adjustment.
Press the A button. The clock is set, and
then the display moves to the changing of
the speed and mileage unit.
!c Press the A button. The minute digits start
flashing.
3 Changing the speed and
mileage unit:
!a After clock setting, the speed and mileage
unit start flashing.
!b Press the B button to select either “km/h”
!d Press the B button until the desired minute is
displayed.
u Press and hold to advance the minute
fast.
and “km” or “mph” and “mile”.
!c Press the A button. The speed and mileage
unit is set, and then the display returns to
the backlight brightness adjustment.
27
Loading...