P/N 19056
INSTRUCTION SHEET
FOR
BLOWER/VAC HIGH PERFORMANCE KIT A-06308
MODELS Affected: HB-180 / HB-180V / HB-390 / HB-390V
NOTE: CLEAN AREAS THOROUGHLY WHERE DECALS ARE BEING APPLIED.
1. Measure up 1/2" from bottom of shown in
Figure 1. Apply
over seam as shown.
FIGURE 1
new
(Black) HOMELITE Decal
(BLACK)
HOMELITE Decal
1/2"
from
bottom.
3. Align Red Decal with the
and apply. Position
next to Air Filter.
FIGURE 3
Red Decal
Sight Marks
4.
Fold
Red Decal as shown in Figure 4.
Sight Marks
Lower Edge of the Hanger Notch
of decal along volute seam
Lower Edge of
Hanger Notch
Air Filter
2. Remove
underneath the handle. Position
WARNING Decal as shown in Figure 2. Align
Sight Marks
as shown. Center lengthwise beneath the handle.
FIGURE 2
Sight Marks
Sight
Marks
original
WARNING Decal from housing
New Long
on each end of the decal to the seam
New Long
WARNING Decal
WARNING
FIGURE 4
Sight Marks
Fold as shown