Homelite 0926 User Manual

1. Purpose

User Manual

The self ballast lamp has implemented three phosphors together into
one compact fluorescent. It is a new type of light resource of green
environment. The product’s applications are practical for supermarkets,
shopping centers, retail stores, and gymnasium.

2. Characteristics
The self ballast lamp provides instant start, long-life and high lumen
output. The lamp is designed to perform up to the industry standards
by using less electricity. Lamp can operate under -18 °C below zero
degrees Celsius. From The testing results shows the self ballast lamp
only uses 20% of the electricity and it is compared and equivalent to
a regular incandescent bulb.

3. Directions
A, For Safety purposes, the lamp fixture must be powered off before
being

installed, changed or being cleaned
B, this self ballast lamp cannot be operated with dimmer device. In order to
keep the lamp’s high performance it should be used in defined voltage.
C, This Lamp can be performed under environmental areas in
temperature
or wet areas.

from -18°C to 45°C, it cannot be used in enclosed fixture

D, Please check the power, voltage and contacts of the lamp incase the
lamp
turns

performs abnormal signs such as the light blinking or the light

off suddenly
E, Do not hold the tube by the hands while changing or cleaning the
lamp.

4. Warnning

The proper way is to hold the lamp by the plastic housing.

Changes or modifications not expressly approved by the party
responsible

equipment.

the

for compliance could void the user's authority to operate

This product may cause interference to radio equipment and should not
be installed near maritime safety communications equipment or other
critical navigation or communication equipment operating between

0.45–30MHz. If this occurs, please change outlet or move the lamp far
away from other appliance.