HoMedics vende sus productos con la intención de que no tengan defectos de fabricación
®
Distributed by
ni de mano de obra por un plazo de tres años a partir de la fecha de compra original, con
las siguientes excepciones. HoMedics garantiza que sus productos no tendrán defectos de
TTeellééffoonnoo::
11--880000--446666--33334422
HHoorraarriioo ccoommeerrcciiaall::
ddee lluunneess aa vviieerrnneess,,
ddee 88::3300 aamm aa 55 ppmm,,
HHoorraa ddeell EEssttee..
IImmpprreessoo eenn CChhiinnaa
HALLEN DEFECTUOSAS DENTRO DEL PERÍODO DE VIGENCIA DE ESTA GARANTÍA. NO SE EFECTUARÁN REEMBOLSOS. SI NO HAY
PIEZAS DE REPUESTO DISPONIBLES PARA LOS MATERIALES DEFECTUOSOS, HOMEDICS SE RESERVA EL DERECHO DE
REALIZAR SUSTITUCIONES EN VEZ DE REPARAR O CAMBIAR.
Esta garantía no se extiende a la compra de productos abiertos, usados, reparados, embalados otra vez y/o abiertos y vueltos a cerrar,
incluyendo entre otras cosas la venta de dichos productos en sitios de remate por Internet y/o la venta de dichos productos por
revendedores o mayoristas. Todas y cada una de las garantías cesarán y terminarán inmediatamente con respecto a cualquier producto o
pieza del mismo que estén reparados, cambiados, alterados o modificados sin el consentimiento previo explícito y por escrito de
HoMedics.
Esta garantía le proporciona derechos legales específicos. Es posible que usted tenga derechos adicionales que pueden variar de un país
a otro. Debido a las regulaciones de ciertos países, es posible que algunas de las limitaciones y exclusiones no se apliquen en su caso.
material ni de mano de obra bajo condiciones de uso y servicio normales. Esta garantía se
extiende únicamente a consumidores y no a distribuidores.
Para obtener servicio para su producto HoMedics, envíe por correo el producto y su recibo de compra
fechado (como comprobante de compra), con franqueo pago, a la siguiente dirección:
HoMedics Consumer Relations
Service Center Dept. 168
3000 Pontiac Trail
Commerce Township, MI 48390
No se aceptarán pagos contra entrega.
HoMedics no autoriza a nadie, incluyendo, pero sin limitarse a, distribuidores, posteriores consumidores
compradores del producto a un distribuidor, o compradores remotos, a obligar a HoMedics de forma alguna
más allá de las condiciones aquí establecidas. La garantía de este producto no cubre daños causados por
uso inadecuado o abuso, accidente, conexión de accesorios no autorizados, alteración del producto,
instalación inadecuada, reparaciones o modificaciones no autorizadas, uso inadecuado de la fuente de
energía/electricidad, cortes de energía, caída del producto, funcionamiento incorrecto o daño de una pieza
de funcionamiento debido al no cumplimiento del mantenimiento recomendado por el fabricante, daños
durante el transporte, robo, descuido, vandalismo, condiciones climáticas, pérdida de uso en el período
durante el cual el producto está en una instalación de reparación o a la espera de piezas o reparación, o
cualquier otra condición, sin importar cual sea, que se encuentre fuera del control de HoMedics.
Esta garantía es válida únicamente si el producto es comprado y operado en el país en el cual se compró el
producto. Un producto que requiera modificaciones o adaptación para habilitar su funcionamiento en
cualquier país que no sea aquél para el que fue diseñado, fabricado, aprobado y/o autorizado, o la
reparación de productos dañados por estas modificaciones no están cubiertos bajo esta garantía.
LA GARANTÍA AQUÍ ESTABLECIDA SERÁ LA ÚNICA Y EXCLUSIVA GARANTÍA. NO HABRÁ NINGUNA OTRA
GARANTÍA EXPRESA NI IMPLÍCITA, INCLUYENDO NINGUNA GARANTÍA DE COMERCIALIZACIÓN O
APTITUD NI NINGUNA OTRA OBLIGACIÓN POR PARTE DE LA COMPAÑÍA CON RESPECTO A
PRODUCTOS CUBIERTOS POR ESTA GARANTÍA. HOMEDICS NO TENDRÁ RESPONSABILIDAD ALGUNA
POR NINGÚN DAÑO INCIDENTAL, CONSECUENTE NI ESPECIAL. BAJO NINGÚN CONCEPTO ESTA
GARANTÍA REQUERIRÁ MÁS QUE LA REPARACIÓN O CAMBIO DE ALGUNA PIEZA O PIEZAS QUE SE
Por más información con respecto a nuestra línea de productos en los EE.UU., visítenos en: www.homedics.com
marca registrada de HoMedics, Inc. y sus compañías afiliadas. TheraP™ es una
marca registrada de HoMedics Inc. y sus compañías afiliadas. Reservados todos los derechos.
Warranty Information ......................................................23
21
READ AND SAVE THESE INSTRUCTIONS
Thank you for purchasing the Homedics No-Touch
Thermometer. This product, along with the entire HoMedics
product line, is built with high quality craftsmanship to provide
you with years of dependable service.
Please read these instructions carefully to ensure proper and
safe operation.
IMPORTANT PRODUCT NOTICES
AND SAFETY INSTRUCTIONS
When using your thermometer, basic precautions should
always be followed. Please read and follow all instructions
and warnings before using this product. Save these
instructions for future reference.
Please note that this product is intended for household use
only and should not serve as a substitute for the advice of a
physician or medical professional. Do not use this device for
diagnosis or treatment of any health problem or disease.
Measurement results are for reference only. Contact your
physician if you have or suspect any medical problem.
• Use the HoMedics No-Touch Thermometer only for its
intended use.
• The thermometer should only be used under supervision of
an adult.
34
• Prolonged high fever requires medical attention — especially
in young children.
• Do not expose thermometer to extreme high or low
temperatures, very high humidity, or direct sunlight.
• Handle product with care and avoid dropping.
• Do not immerse thermometer in water or other liquids.
• Do not dissemble or attempt to repair unit.
• When not in use, keep thermometer in storage bag and out
of the reach of children.
• Never attempt to insert anything into lens or sensor area.
• Avoid touching lens or sensor area.
• Batteries:
• Batteries can be harmful to thermometer if leakage
occurs. If thermometer will not be used for an extended
period of time (three months or more), remove the
batteries.
• A worn battery should be replaced immediately with a
new one.
• Align battery polarities properly when changing
• Additional product notices and safety instructions are found
in the following sections of this manual:
• Important notes regarding temperature measurements
(pg. 19)
• Care, maintenance and cleaning (pg. 20)
HoMedics No-Touch Thermometer
How does this product work?
The HoMedics No-Touch thermometer is an electronic device
designed to measure temperature of the body at the
forehead. The temperature displayed represents measured
forehead temperature converted to the more familiar oral
equivalent. This is performed by using a mathematical
adjustment of forehead temperature. This reading will not
necessarily be the same as a temperature measured orally at
that same time.
When consulting a physician, it is important to communicate
that the temperature reading was taken from the forehead
and converted to an oral equivalent.
The HoMedics No Touch Thermometer is also designed to
measure things other than human temperature such as bath
water, liquids and food. See page 15 for more information on
measuring the temperature of objects.
56
What is normal body temperature? What is a fever?
Normal body temperature is a range that varies from person to
person, and throughout the day. The average normal body
temperature is 98.6°F (37°C). Fever is defined as a body
temperature elevated over an individual’s normal body
temperature. It is important to determine each person’s normal
body temperature in order to properly assess whether or not a
fever is actually present. This range can easily be determined
by tracking temperature on a consistent basis by measuring at
the same time each day.
This thermometer converts the forehead temperature to an oral
equivalent and meets industry standards regarding
temperature accuracy. For temperature between 98.6° –
102.2°F (36.0° – 39.0°C) it is accurate to ± 0.4°F (±0.2°C).*
See Product Specifications on page 22 for more information.
*ASTM Standard E 1965-98
MODE
MEM
SCAN
DEVICE DESCRIPTION
DISPLAY DESCRIPTION
Figure 2
Figure 1
Scan
Measurement
Button
Position
Indicator Light
(surrounds
scan button)
Measurement
Mode Indicator
Night Mode
Indicator
Low Battery
Symbol
Measurement in Progress
Temperature/
Information Display
Measurement
Scale
Memory Number
Memory Mode
Indicator
Fever Alarm
Figure 3
on off
Lens
Cover
Memory
Night
Mode
Button
Button
Mode
Button
Battery Door
(back of unit)
Front of
Thermometer
7
8
Inserting and replacing batteries
1) Remove battery cover.
2) Remove old batteries.
3) Insert 2 AAA batteries, taking care to align polarities
properly.
4) Replace battery cover.
Until a measurement is taken, the thermometer will display a
default temperature of “00” after battery power is restored.
When the low battery symbol appears on the display the
battery should be replaced. When the low battery symbol
appears with the “Lo” symbol, the battery must be replaced
in order for the ear thermometer to function (fig 4).
Figure 4
Note: Do not discard used batteries in trash. Please turn
in at an official collection point. If thermometer will not be
used for an extended period of time (three months or
more), remove battery to prevent damage to the
thermometer from possible battery leakage.
9
Changing Temperature Scale Between Celsius and Fahrenheit
When unit is turned on press and hold the MEM and MODE
buttons for 3 seconds. When scale is changed, the thermometer
will beep once and the °C or °F will appear on the screen.
Using Night Mode
Night mode is a unique feature that allows a temperature reading
to be taken in the dark. Night mode activates an LED flashlight to
aid in aiming the thermometer at the subject’s forehead and a
display that illuminates to enable you to view readings in the dark.
Additionally, audio “beeps” are disabled in Night Mode.
To turn night mode on/off:
When unit is on, press the button. The Night Mode
symbol will appear on the screen. To turn Night Mode off,
press the button. The feature will be turned off and the
Night Mode symbol will no longer appear on the display.
Night Mode is not recommended for general use in order to
preserve battery life. Modes can be changed at any time
before or after measurement. Do not change modes during
measurement as the accuracy of the reading may be affected.
Changing measurement mode from PERSON to OBJECT:
For measuring the temperature of a person, the thermometer
must be in PERSON mode. Press and release the MODE button
until you see the word “PERSON” on the display. If you would like
to measure an object, press and release the MODE button until
you see the word “OBJECT” on the display.
10
To use the HoMedics No-Touch Thermometer properly,
please read the following:
1)The forehead of the person should be clean and dry.
Oils, cosmetics and perspiration can cause the
thermometer to measure a lower than actual temperature.
2)The person should be calm and sitting or standing still
when temperature is measured. Allow the person to sit
and rest for 30 minutes after the following activities and
before taking a temperature measurement:
•The person has exercised or exerted him/herself
•The person has been exposed to extreme cold or heat
•The person has had a cold or hot compress on
forehead
•The person has been wearing a hat or scarf
•The person has been engaging in activities that may
affect the normal temperature of the forehead such as
showering, drying hair, etc.
3)The lens of the HoMedics No-Touch Thermometer should
be clean and dry. Clean with a cotton swab
dipped in rubbing alcohol. Squeeze swab to remove
excess liquid. Excess moisture could damage the
thermometer.
4)The temperature measurement should be taken in a
draft free room with temperature between 61°F— 95°F
(16°C — 35°C).
5) The thermometer should not come in direct contact
with any part of the subject’s body.
6) The temperature measurement should be taken away
from electromagnetic fields emitted by cell or cordless
phones.
11
12
How to take a temperature
reading of a person:
1) Turn unit on by sliding cover
into “on” position.
2) Select PERSON mode (if not
already in PERSON mode), by
pressing MODE button.
3) Press and hold “SCAN” button.
4) Move thermometer into
position, pointing at the
center of the forehead.
• Light around “SCAN” button
will flash until unit is in
proper position from
person’s forehead.
• Light will be on and not
flashing when
positioned properly.
Figure 6
Figure 7
13
Figure 5
on off
5) Release “SCAN” button. Do not move thermometer
until the temperature appears on display.
6) Turn thermometer off by sliding cover into “off” position
or thermometer will enter sleep mode after 1 minute. To
“wake” thermometer press SCAN button.
Note: Wait 5 seconds between readings.
Fever Alarm
The Fever Alarm is a unique feature that alerts the user
anytime a temperature reading is 100°F (37.8°C) or greater
with a visual notice on the display and a triple beep audio
alert (visual alert only in memory mode or night mode). For
readings at or above this temperature it is LIKELY a fever is
present.
Note: A temperature reading below 100°F (37.8°C) does
not mean that a fever is not present. Likewise, a
temperature greater than or equal to 100°F (37.8°C) does
not guarantee the presence of a fever.
This product is not intended for substitution of consultation
with a physician. Contact your physician if any one of the
following conditions is present: Vomiting, diarrhea, change
in breathing activity or appetite, irritability, lethargy, or
unusual sleepiness.
14
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.