HoMedics SC-900 Instruction Manual

Model SC-900

Instruction Manual

Dual Digital Scale

Thank you for purchasing a HoMedics® digital scale. All of our precision instruments for weight
measurement are engineered and designed to meet the highest quality standards …to assure
you years of uncompromising accuracy and consistently dependable, convenient performance.

Please read this instruction manual carefully before use. Keep these instructions handy for
future reference.

Battery Installation

1. Use 3 AAA batteries (included. Remove any plastic wrap from the batteries before
proceeding).

2. Remove the battery compartment cover on the bottom of the scale.

3. Place the batteries into the battery compartments according to the “+” and “-” polarity symbols
at the bottom of the compartment.

4. Replace the battery compartment cover.

NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. Do not let children handle batteries.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the

batteries if the scale will not be used for a long period of time.

Low Battery

Your HoMedics® scale is equipped with a low battery indicator. It will display "Lo" or readings
will grow dim or become irregular if the batteries need replacement. Always replace all batteries
at the same time; do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc)
or rechargeable (ni-cad, ni-mh, etc.) batteries.

General Operation

1. This scale operates on 3 “AAA” batteries, which are included. Please see “Battery
Installation” section of this manual for installation instructions. Also, some models have a static

cling label on the lens to prevent scratching. Please remove before use.

2. The digital display of the scale has been set at the factory to read weight in pounds. You may
select kilograms units of measurement by pressing the “kg/lb” button on the bottom of the scale.

3. Place scale on flat, hard surface. Carpeted or uneven floors may affect accuracy.

4. Step on the scale (disregarding the reading) and step off. This process insures the scale is
set and is now ready for use. Do this whenever the scale is moved or after battery replacement.
At all other times step straight onto the scale.

5. Step onto the scale platform and remain still. The digital display will count up to your weight.
The display will flash three times when the weight is locked. The pointer will also move and lock
into place, indicating your weight on the dial. Your weight is now displayed.

6. If you step off of the scale, your weight will display for approximately 5 seconds, then the
display will turn off and the pointer will return to zero. If you continue to stand on the scale, your
weight will display for approximately 15 seconds, then the display will turn off and the pointer will
return to zero.

Reaching Target Weight

Maintaining proper weight is essential to healthy living. The Body Mass Index (BMI) is the most
widely accepted measurement of weight according to health professionals. Use the chart below
to determine your own BMI which is represented by the number that is a match between your
height and weight. Remember to eat right and exercise.

NOTE: BMI has some limitations: It can overestimate body fat in people who are very muscular,
and it can underestimate body fat in people who have lost muscle mass, such as the elderly.
Consult your physician to determine what is most ideal for you.

Trouble Shooting

In Case of Difficulty...

1. Place your feet in the same position every time you weigh yourself. Stand still during
measurement.

2. Weigh yourself without clothing whenever possible. Clothes can vary in weight.

3. Move the scale to a location where it won't be bumped. If your scale is bumped while being
activated or while in use, an inaccurate reading may occur.

4. For the most consistent readings, weigh yourself at the same time of day. Allow for weight
fluctuations due to food or drink in your system.

5. The maximum capacity of this scale is 396 lb / 180 kg. Should “OL” appear on the display
during a weighing, this indicates that the maximum weighing capacity of the scale has been
exceeded. Remove the weight immediately; otherwise, permanent damage may occur.

6. If the message “CAL” or a blank screen displays: Instability or Initialization error. To correct,
step off the platform and allow the display to turn off. Then step on the scale again and remain
still while the scale computes.

7. If the pointer does not return to zero, reset the scale by removing all the batteries and reinstall
them.

Precautions

1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap.
Never use detergents, excess water, treated cloths, harsh cleaning agents, or sprays. Do not
attempt to lubricate or open scale casing as this will void your warranty.

2. Although your scale is designed to be maintenance-free, it contains sensitive electronic parts.
Avoid rough treatment. Do not drop, kick, or jump on it. Treat it with care to ensure the best
performance.

3. This scale is designed to read weights between 11 and 396 lb / 5 and 180 kg. To prevent
damage do not place more than 396 lb / 180 kg on it.

4. Do not store scale where you store cleaning chemicals. The vapors from some household
products may affect the electronic components of your scale. Do not store scale on its side.

5. This scale is an extremely sensitive weighing device. In order to prevent run down of the
battery, do not store anything on the scale.

6. Do not dispose of batteries in fire. Batteries may explode or leak. Always replace all batteries
at the same time; do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc)
or rechargeable (ni-cad, ni-mh, etc.) batteries. Remove the batteries if the scale will not be used
for a long period of time.

Caution: Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-Consult the dealer or an experienced radio/TV technician for help.

Five (5) Year Limited Warranty

This scale is warranted against defects in materials or workmanship (excluding batteries) for five
(5) years for the original purchaser from date of retail purchase. It does not cover damages or
wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment
and/or repair. Do not return to retailer. Should this scale require service (or replacement at our
option) while under warranty, please pack the item in the original packaging and return it
prepaid, along with store receipt showing date of purchase and a note explaining reason for
return to:

Taylor Precision Products, Inc.

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

www.taylorusa.com

There are no express warranties except as listed above. This warranty gives you specific legal
rights, and you may have other rights which vary from state to state.

For additional product information, or warranty information outside the USA, please contact us
through www.taylorusa.com.

©2014 Taylor Precision Products, Inc. and its affiliated companies, all rights reserved.
HoMedics® is a registered trademark under license. All rights reserved.

Made to our exact specifications in China.

Not legal for trade.

SC-900 6.14