Illuminated Beauty Mirror Features
• Illumi-Touch™ Control – Select from 3 light settings with
a gentle touch of the base
• Variable Light Setting – Choose from day, office or
evening illumination
• Incandescent Light – Soft glare-free & shadow-free viewing
• 7x/1x Magnification – Two-sided mirror with normal and 7x
magnification
• 7.5” Diameter
• Stable, non-slip base
• Fog free
• Mirror Measures 8”L x 6”W x 14.25”H
• Polished Chrome and Satin Nickel Finish
• Digital LCD clock in base
• Convenient built-in outlet
• Includes three replacement light bulbs
Instructions for Use
1. Carefully remove all contents from the packaging and
inspect the product to make sure all components have
been received (Fig. 1).
2. Remove protective plastic coating from mirror face.
3. Plug adaptor into AC adaptor receptacle (Fig. 1).
4. Place mirror on an even surface.
5. Adjust the mirror to either normal or magnified viewing.
To do so swivel the mirror to the viewing side of your preference
while firmly holding down the base.
6. Plug unit into a 120V household outlet.
7. Select the light setting of your preference with the Illumi-Touch
control feature. Touch the base of the mirror to activate:
•Touch once for evening (Low)
•Touch a second time for office (Medium)
•Touch a third time for day (High)
•Touch a fourth time to turn off
Note: The mirror casing may be hot after prolonged use.
Be cautious when adjusting the mirror face.
8. To use the extra outlet in the adaptor, plug in the appliance of your
choice (Fig. 1). NOTE: Never leave a plugged in appliance
unattended. Do not exceed 12 amps on the electrical outlet.
Setting the Time & Date
1. Remove the battery cover (Fig. 2) and insert 1 “AAA” battery.
NOTE: The battery power is designed only to provide memory
back-up for the clock in the event of power outages or if the unit is
unplugged.
2. Press TIME MODE button (Fig. 2) once. The hour number will
flash continuously.
3. Continuously press the SET button (Fig. 2) until you reach the
correct hour. NOTE: A PM indicator will appear in the lower
section of the clock face during the PM hours. Be sure to set the
time for the correct 12-hour period - AM (morning) or PM (evening)
(Fig. 3).
4. Press TIME MODE button again and the minute numbers will begin
to flash continuously.
5. Continuously press the SET button until you reach the correct
minute.
6. Press the TIME MODE button. The first digit is continuously
flashing; it is ready to set the date.
7. Press the SET button until you reach the correct month. Numbers
1-12 represent months January - December accordingly.
8. Press TIME MODE button again and the Day numbers will begin to
flash continuously.
9. Press the SET button until you reach the correct day, 1-31
accordingly.
10. Press the TIME MODE button. The time and date are now set.
11. To view the date, press the SET button once. The date will flash
on the screen for a few seconds.
12. To use the Seconds feature press the SET button twice
to enter this mode. The clock will continuously count
in sixty-second increments. To exit this mode press the
SET button a third time, the time will display.
4
5