Les produits mis à vente par HoMedics sont considérés comme exempts de vices de
matériaux et de fabrication pendant une période de deux ans à partir de la date de l'achat
initial, hormis dans les cas indiqués ci-dessous. HoMedics garantit que ce produit est exempt
de vices de matériaux et de fabrication dans des conditions normales d'utilisation et de
service. Cette garantie s'applique uniquement aux consommateurs et non pas aux détaillants.
Pour obtenir un service au titre de la garantie pour votre produit HoMedics, veuillez
communiquer avec un représentant du service des relations clientèle. Veuillez vous assurer
d'avoir le numéro de modèle du produit à portée de main.
HoMedics n'autorise personne, y compris - mais non exclusivement - les détaillants/
revendeurs, le consommateur acheteur ultérieur du produit auprès d'un détaillant/revendeur,
ou les acheteurs par correspondance, à contraindre HoMedics d'une manière quelconque
au-delà des clauses énoncées ici même. Cette garantie ne couvre pas les dommages causés
par une mauvaise utilisation ou un abus; tout accessoire utilisé sans autorisation; toute
modification apportée au produit; une mauvaise installation, les réparations ou modifications
non autorisées; une mauvaise utilisation du courant électrique; une panne de courant; un
produit qui est tombé, un dysfonctionnement ou un dommage à une pièce opérationnelle
suite au non-respect des mesures d'entretien recommandées par le fabricant; les dommages
durant le transport; le vol, la négligence, le vandalisme ou les conditions environnementales;
une perte d'utilisation pendant la période durant laquelle le produit se trouve dans un centre
de réparation ou en attente de pièces ou d'une réparation; ou toutes autres conditions
quelconques ne pouvant être imputées à HoMedics.
Cette garantie prend effet dans la mesure où le produit est acheté et utilisé dans le pays
d'achat du produit. Un produit devant faire l'objet de modifications ou de réglages afin
de permettre son fonctionnement dans un pays autre que celui pour lequel il est conçu,
fabriqué, approuvé et/ou autorisé, ou encore la réparation de produits endommagés par ces
modifications, ne sont pas couverts par cette garantie.
LA GARANTIE STIPULÉE ICI MÊME CONSTITUE LA SEULE ET UNIQUE GARANTIE.
IL N'Y A AUCUNE AUTRE GARANTIE, EXPRESSE OU IMPLICITE, Y COMPRIS TOUTE
GARANTIE IMPLICITE DE COMMERCIABILITÉ OU D'APTITUDE À L'EMPLOI DE LA PART
DE LA SOCIÉTÉ QUANT AUX PRODUITS COUVERTS PAR CETTE GARANTIE. LA SOCIÉTÉ
HOMEDICS NE SAURAIT ÊTRE TENUE RESPONSABLE DE TOUT TYPE DE DOMMAGES
INDIRECTS, CONSÉCUTIFS OU PARTICULIERS. CETTE GARANTIE NE PEUT EN AUCUN
CAS DÉPASSER LES LIMITES DE LA RÉPARATION OU DU REMPLACEMENT DE TOUTE OU
TOUTES PIÈCE(S) AVÉRÉE(S) DÉFECTUEUSE(S) PENDANT LA PÉRIODE DE GARANTIE.
AUCUN REMBOURSEMENT NE POURRA AVOIR LIEU. DANS LE CAS OÙ DES PIÈCES DE
RECHANGE POUR DES MATÉRIAUX DÉFECTUEUX SERAIENT INDISPONIBLES, HOMEDICS
SE RÉSERVE LE DROIT D'OPÉRER UNE SUBSTITUTION DE PRODUITS AU LIEU D'UNE
RÉPARATION OU D'UN REMPLACEMENT.
Cette garantie ne prend pas en compte l'achat de produits ouverts, utilisés, réparés,
réemballés et/ou rescellés, y compris, mais non exclusivement, la vente de tels produits sur
des sites Internet de ventes aux enchères et/ou les ventes desdits produits par des revendeurs
en vrac ou de surplus. Les réparations, remplacements, altérations ou modifications de
tous produits ou pièces s'y rattachant, sans le consentement écrit préalable et exprès de
HoMedics, mettent fin à toutes les garanties et entraînent leur résiliation immédiate.
Cette garantie vous confère des droits juridiques précis. Il est également possible que vous
bénéficiiez d'autres droits qui peuvent varier d'une juridiction à l'autre. Compte tenu de la
réglementation particulière de chaque pays, certaines des limitations et des exclusions
précédentes peuvent ne pas s'appliquer à votre cas Pour plus amples renseignements relatifs
à notre ligne de produits aux É.-U., rendez-vous sur : www.homedics.com. Pour le Canada,
rendez-vous sur le site suivant :
www.homedics.ca.
GARANTIE LIMITÉE DE DEUX ANS
HoMedics® es una marca registrada de HoMedics, LLC.
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE
PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,
INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
DANGER
• Always unplug the air cleaner from the electrical outlet immediately after using and
before cleaning.
• Keep cord away from heated surfaces
• Always place the air cleaner on a firm, level surface.
• Always place the air cleaner at least twelve (12) inches away from walls and three (3)
feet from heat sources such as stoves, radiators, or heaters.
• DO NOT operate where aerosol (spray) products are being used or where oxygen is
being administered.
• DO NOT reach for an appliance that has fallen into water. Unplug it immediately.
• DO NOT place or store appliance where it can fall or be pulled into a tub or sink.
• DO NOT place in or drop into water or other liquid.
• Keep dry - DO NOT operate in a wet or moist condition.
• Check your air cleaner cord and plug connections. Faulty wall outlet connections
or loose plugs can cause the outlet or plug to overheat. Be sure the plug fits tight
in the outlet.
– TO REDUCE THE RISK OF ELECTRIC SHOCK:
WARNING
SHOCK OR INJURY TO PERSONS:
• Extreme caution is necessary when any air cleaner is used by or near children or
invalids and whenever the air cleaner is left operating and unattended.
• Always unplug the air cleaner when not in use.
• Do not operate the air cleaner with a damaged cord or plug, or after the air cleaner
malfunctions, has been dropped or damaged in any manner. Return to HoMedics
Consumer Relations for examination, electrical or mechanical adjustment, or repair.
• This air cleaner is not intended for use in bathroom, laundry areas and similar moist
indoor locations. Never locate air cleaner where it may fall into a bathtub or other
water container.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners or
similar coverings. Do not route cord under furniture or appliances. Arrange cord
away from traffic areas where it can be tripped over.
• To disconnect the air cleaner, first turn controls to the OFF position, then remove
plug from outlet.
• Do not tilt or move the air cleaner while it is in operation. Shut off and remove plug
from outlet before moving.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as
this may cause an electric shock or fire, or damage the air cleaner.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not
use on soft surface, like a bed, where openings may become blocked.
• Use this air cleaner only for its intended use as described in this manual. Any other
use not recommended by the manufacturer may cause fire, electric shock, or injury
to persons.
• DO NOT use outdoors.
– TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC
SAVE THESE IMPORTANT INSTRUCTIONS FOR EASY REFERENCE
23
This product earned the ENERGY STAR by meeting strict energy efficiency guidelines set by the US EPA. US EPA does not endorse any
manufacturer claims of healthier indoor air from the use of this product.
SAVE THESE IMPORTANT INSTRUCTIONS FOR EASY REFERENCE
Technical Specifications
Grounding Pin
Adapter
Metal Screw
The energy efficiency of this ENERGY STAR qualified model is measured
based on a ratio between the model’s CADR for Dust and the electrical
energy it consumes, or CADR/Watt.
Grounding Instructions
To reduce the risk of electric shock, this product has a grounding
type plug that has a third (grounding) pin (Fig. 1). This plug will only
fit into a grounding type power outlet. If the plug does not fit into
Fig. 1
Tab for
Grounding
Screw
Fig. 3
the outlet, contact qualified personnel to install the proper outlet.
Do not alter the plug in any way. If your home is not equipped with
a grounded outlet, you may use a temporary adapter (Fig. 2). The
tab for grounding screw extending from the temporary adapter must
be connected to a permanent ground such as a properly grounded
outlet box cover and it must be held in place by a metal screw (Fig.
3). The temporary adapter should be used only until a properly
grounded outlet (Fig. 4) can be installed by a qualified electrician.
Input voltage120 V
Rated Frequency60 HZ
Power24 Watts
Weight6.654 lbs
Noise Level<60 dB
Unit Height15.4"
Main Features on The Sharper Image Brethe Air Cleaner
Nano-Coil Filter
VOC/Odor Filter
Pre-Filter
Main Unit
(rear view)
Rear Grill
Plate
Fig. 4
Pre-Filter: Captures large particles and fibers
Nano-Coil Filter: Cleanable spiral filter that captures charged air contaminants
VOC/Odor Filter: (optional) Removes VOC (Volatile Organic Compounds)
45
Operating Instructions
Getting Started
• Take the air cleaner out of the box and remove the clear protective plastic bag.
• Place the air cleaner on a firm level surface.
• BEFORE TURNING ON THE AIR CLEANER, if you choose to use the optional
VOC filter, you will need to install it and confirm that all the filters are firmly in place.
1. Open the rear grill by gently pushing
the release tabs toward the outside of
the unit. See Fig. 1
Fig. 4
TABSTABS
3. The pre-filter and nano-coil filter
will be installed already. To install
the VOC/Odor filter (optional), remove
the VOC/Odor filter from the plastic
bag. Place the VOC filter into the
unit flush against the pre-filter,
secured by four clips. See Fig. 4
4. Place the tabs at the bottom of the
grill plate into the base of the unit.
See Fig. 5
Fig. 1
Fig. 2
Fig. 3
Fig. 5
2. Pull the grill away from the body until
the tabs at the bottom of the grill
plate easily slide away from the unit.
See Fig. 2 & 3
Fig. 6
NOTE: Unit will not operate unless nano-coil, pre-filter and grill are properly
67
installed.
5. Hold engaged bottom of the grill
plate in place and push the top of
the grill plate back toward the unit.
The release tabs at the top of the grill
will click back into place. See Fig. 6
Control Panel
QUIET
CLEAN
F ILT ER
TURBO
Fan SpeedOn/OffClean FilterTimer Key
Operating Instructions
1. On/Off and Speed Settings
1. To turn the air cleaner on, press the ON/OFFbutton. When the air cleaner is on,
the LED light will be lit and the air cleaner will start to operate on LOW speed.
2. There are four speed settings: Quiet (low) (medium) TURBO.
Quiet mode is whisper quiet – below normal room noise – and is recommended
particularly for night use and uninterrupted sleep. TURBO mode gives a cleaning
power boost. When the fan is set at TURBO, it will run for 30 minutes and then
return to (low) speed.
3. To turn the air cleaner OFF, simply press the ON/OFFagain.
1hr4hr
8hr12hr
Using the Remote Control
BEFORE FIRST USE, REMOVE PLASTIC PULL TAB FROM BATTERY COMPARTMENT.
Battery Installation
One CR2032 3V battery is included with the remote control. To change the battery,
remove the battery door at the back of the remote by squeezing the tab and pulling the
door away from the back of the remote. Please insert the battery into the remote with the
positive side up as shown on the drawer.
NOTE: Always keep the battery and remote control out of the reach of children.
BATTERY NOTE
• If the unit is not going to be used for a long period of time, remove batteries to
prevent damage due to possible battery leakage.
• Clean the battery contacts and also those of the device prior to battery installation.
• Remove used batteries promptly.
• Dispose of properly in accordance with all state, province, and country regulations.
• Do not dispose of batteries in fire. Batteries may explode or leak.
• Use only the size and type of batteries specified.
• When installing batteries, observe proper polarity +/-. Improper installation of
batteries may cause damage.
2. Timer Settings
There are four possible timer settings: 1 (one) hour, 4 (four) hours, 8 (eight) hours, and
12 (twelve) hours. To activate the timer, press the on the control panel. Each time
it is pressed, it will advance to the next timer setting. The timer LED will be illuminated
while the timer function is on. Cycle through 1, 4, 8, 12, then off to operate the unit
without the timer feature.
89
Bottom of Remote
Power ON/OFF
Fan Speed
Timer
If the timer is set, the
white backlight of the
corresponding hour
setting will be on for
3 seconds and then
turn off.
Filter Cleaning and Maintenance
Make sure the air cleaner is turned off and unplugged from the outlet before cleaning.
Check the filters every 30 days to see if they need cleaning. If you use your air cleaner
daily, we recommend checking the filters more frequently.
3. Remove the nano-coil filter from
the unit by grasping the center
handle and pulling out from the
center hub. See Fig. 10
Nano-Coil Filter
1. Open the rear grill by gently pushing
the release tabs toward the outside of
the unit. See Fig. 7
Fig. 7
2. Pull the grill away from the body until
the tabs at the bottom of the grill
plate easily slide away from the unit.
See Fig. 8 & 9
Fig. 8
Fig. 9
1011
Fig. 10
Fig. 11
TABSTABS
Fig. 12
Fig. 13
4. Use the brush attachment with your
vacuum cleaner. Run the attachment
along both sides of the nano-coil
filter, taking care not to dislodge the
combs. See Fig. 11
5. Replace the nano-coil filter.
Make sure to align the center of the
filter handle with the center hub.
Filter handle should be vertical.
Be sure the post on the center hub
comes through the hole on the filter’s
handle. See Fig. 10
6. Place the tabs at the bottom of the
grill plate into the base of the unit.
See Fig. 12
7. Hold engaged bottom of the grill
plate in place and push the top of the
grill plate back toward the unit until
the release tabs at the top of the grill
click back into place. See Fig. 13
DO NOT USE WATER OR ANY
HOUSEHOLD CLEANERS OR
DETERGENTS TO CLEAN THE
NANO-COIL FILTER OR
PRE-FILTER
Pre-Filter
Fig. 14
Fig. 15
1. Open the rear grill by gently pushing
the release tabs toward the outside of
the unit. See Fig. 14
2. Pull the grill away from the body until
the tabs at the bottom of the grill
plate easily slide away from the unit.
See Fig. 15 & 16
Fig. 17
Fig. 18
3. If you are using the VOC filter, remove
it by sliding out of the 4 clips.
See Fig. 17
4. Remove the pre-filter by gently pulling
it off and away from the 4 posts.
See Fig. 18
5. Use the brush attachment with your
vacuum cleaner. Run the attachment
along both sides of the pre-filter.
See Fig. 11
6. Replace the pre-filter by pushing the
4 loops of the filter onto the 4 posts
of the grill. See Fig. 18
7. If you are using the VOC filter, put it
back in and secure with 4 clips.
See Fig. 17
Fig. 16
1213
8. Place the tabs at the bottom of the
grill plate into the base of the unit.
See Fig. 19
TABSTABS
Fig. 19
9. Hold engaged bottom of the grill
plate in place and push the top of the
grill plate back toward the unit until
the release tabs at the top of the grill
click back into place. See Fig. 20
Fig. 20
Clean Filter Indicator
This air cleaner is equipped with a CLEAN FILTER indicator to let you know when it
is time to clean the Nano-Coil filter, about every 732 hours of use. When the NanoCoil filter is ready to be cleaned, the CLEAN FILTER indicator will light up on the
control panel.
Once the Nano-Coil filter has been cleaned, press and hold the CLEAN FILTER button
until it beeps to reset the filter indicator.
We recommend replacing your VOC filter, if you choose to use it, when you replace
your Nano-Coil filter (about every 18 months, with regular maintenance).
To purchase a Nano-Coil replacement filter, model # AR-NCFL1, go back to the retailer
(where you purchased your air cleaner) or visit www.homedics.com. Replacement
VOC filter, model # PP-ARNC01VOC, can also be purchased
at www.homedics.com.
Cleaning and Maintenance
We recommend that the air cleaner be cleaned at least once a month and before storage.
1. Turn the air cleaner OFF and unplug it from the outlet
2. Use a dry cloth to clean the external surfaces of the air cleaner
3. The grill plate may be cleaned with a damp cloth or the brush attachment of
your vacuum cleaner.
DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION
Troubleshooting
ProblemPossible Cause
The unit won't
turn on
• The unit is not
plugged in
• Nano-coil filter is
incorrectly installed or
out of place
• Rear cover is not
completely attached
• Remote control battery
has run down
No air flow or
noticeable
• The front or rear grill is
blocked by foreign objects
cleaning effect
• The plastic bag is still on
the VOC/Odor filter
• The filters are dirty• Clean or replace the
• Plug the unit in
• Properly install the
nano-coil filter
• Make sure rear grill is
completely engaged
• Replace the battery
• Remove any obstacles
or check the pre-filter
and clean if needed
• Remove the plastic bag
nano-coil filter and/
or clean the pre-filter
Solution
• The unit has been running
for over 2,000 hours
1415
• Replace the
nano-coil filter
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.