EN USER MANUAL |
DRILL PRESS |
SB4116HN
SB4115H
SB4116HM
SB4115N
SB4115H/SB4115N/SB4116HM/SB4116HN
DRILL PRESS
Betriebsanleitung und |
Read the operation manual |
Sicherheitshinweise vor |
carefully before first use. |
Erstinbetriebnahme lesen |
|
und beachten! |
|
Ausgabe/Edition: 13.01.2014 – Revision 02 –CEC- EN
INHALT /INDEX
1 INHALT /INDEX
2 |
VORWORT |
5 |
|
3 |
SICHERHEITSZEICHEN / SAFETY SIGNS |
6 |
|
4 |
TECHNIK |
9 |
|
|
4.1 |
Komponenten ...................................................................................................... |
9 |
|
4.2 |
Technische Daten .............................................................................................. |
10 |
5 |
SICHERHEIT |
11 |
|
|
5.1 |
Bestimmungsmäßige Verwendung .................................................................... |
11 |
|
|
5.1.1 Arbeitsbedingungen ...................................................................................... |
11 |
|
|
5.1.2 Unzulässige Verwendung ............................................................................... |
11 |
|
5.2 |
Sicherheitshinweise .......................................................................................... |
12 |
|
5.3 |
Restrisiken ........................................................................................................ |
14 |
6 |
MONTAGE |
15 |
|
|
6.1 |
Vorbereitende Tätigkeiten ................................................................................. |
15 |
|
|
6.1.1 Lieferumfang................................................................................................ |
15 |
|
|
6.1.1 Der Arbeitsplatz............................................................................................ |
15 |
|
|
6.1.1 Transport / Ausladen der Maschine ................................................................. |
15 |
|
|
6.1.1 Vorbereitung der Oberflächen......................................................................... |
15 |
|
6.2 |
Montage der zum Transport abmontieren Teile ................................................. |
16 |
|
6.3 |
Elektrischer Anschluss....................................................................................... |
17 |
7 |
BETRIEB |
18 |
|
|
7.1 |
Betriebshinweise ............................................................................................... |
18 |
|
7.2 |
Einstellungen..................................................................................................... |
19 |
|
7.3 |
Bedienung ......................................................................................................... |
20 |
|
|
7.3.1 Drehzahl...................................................................................................... |
20 |
|
|
7.3.2 Tisch ........................................................................................................... |
21 |
|
|
7.3.3 Bohrtiefe ..................................................................................................... |
21 |
8 |
WARTUNG |
22 |
|
|
8.1 |
Instandhaltung und Wartungsplan .................................................................... |
22 |
|
8.2 |
Reinigung .......................................................................................................... |
23 |
|
8.3 |
Entsorgung........................................................................................................ |
23 |
9 FEHLERBEHEBUNG |
24 |
|
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 2 |
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |
INHALT /INDEX
10 |
PREFACE |
25 |
|||
11 |
TECHNIC |
26 |
|||
|
11.1 |
Components .................................................................................................. |
26 |
||
|
11.2 |
Technical Details ........................................................................................... |
27 |
||
12 |
SAFETY |
|
28 |
||
|
12.1 |
Intended Use................................................................................................. |
28 |
||
|
|
12.1.1 |
Ambient conditions................................................................................... |
28 |
|
|
|
12.1.2 |
Prohibited use ......................................................................................... |
28 |
|
|
12.2 |
Security instructions ..................................................................................... |
29 |
||
|
12.3 |
Remaining risk factors .................................................................................. |
31 |
||
13 |
ASSEMBLY |
32 |
|||
|
13.1 |
Preparatory activities.................................................................................... |
32 |
||
|
|
13.1.1 |
Delivery content ...................................................................................... |
32 |
|
|
|
13.1.2 |
Workplace requirements ........................................................................... |
32 |
|
|
|
13.1.3 |
Transport ................................................................................................ |
32 |
|
|
|
13.1.4 Preperation of the surface ......................................................................... |
32 |
||
|
13.2 |
Assembly....................................................................................................... |
33 |
||
|
13.3 |
Power supply ................................................................................................ |
34 |
||
14 |
OPERATION |
35 |
|||
|
14.1 |
Operation instructions................................................................................... |
35 |
||
|
14.2 |
Adjustment ................................................................................................... |
36 |
||
|
14.3 |
Operation ...................................................................................................... |
37 |
||
|
|
14.3.1 |
Spindle speed .......................................................................................... |
37 |
|
|
|
14.3.2 |
Table...................................................................................................... |
38 |
|
|
|
14.3.3 |
Boring depth ........................................................................................... |
38 |
|
15 |
MAINTENANCE |
39 |
|||
|
15.1 |
Maintenance plan .......................................................................................... |
39 |
||
|
15.2 |
Cleaning ........................................................................................................ |
39 |
||
|
15.3 |
Disposal ........................................................................................................ |
39 |
||
16 |
TROUBLE SHOOTING |
40 |
|||
17 |
ERSATZTEILE / SPARE PARTS |
41 |
|||
|
17.1 |
Ersatzteilbestellung / spare parts order........................................................ |
41 |
||
|
17.2 |
SB4115H ....................................................................................................... |
42 |
||
|
|
|
|||
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 3 |
|||
|
|
|
|
|
|
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |
INHALT /INDEX
|
17.3 |
SB 4115N ...................................................................................................... |
45 |
|
17.4 |
SB4116HM, SB4116HN .................................................................................. |
48 |
18 |
KONFORMITÄTSERKLÄRUNG/CERTIFICATE OF CONFORMITY |
53 |
|
19 |
GARANTIEERKLÄRUNG |
54 |
|
20 |
GUARANTEE TERMS |
55 |
|
21 |
PRODUKTBEOBACHTUNG |
56 |
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 4 |
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |
SICHERHEITSZEICHEN / SAFETY SIGNS
3 SICHERHEITSZEICHEN / SAFETY SIGNS
DE SICHERHEITSZEICHEN BEDEUTUNG DER SYMBOLE
EN |
SAFETY SIGNS |
|
DEFINITION OF SYMBOLS |
DE |
WARNUNG! Beachten Sie die Sicherheitssymbole! Die |
|
Nichtbeachtung der Vorschriften und Hinweise zum Einsatz des |
|
Erdbohrers kann zu schweren Personenschäden und tödliche |
|
Gefahren mit sich bringen. |
EN |
ATTENTION! Ignoring the safety signs and warnings applied |
|
on the machine as well as ignoring the security and operating |
|
instructions can cause serious injuries and even lead to death. |
DE |
ANLEITUNG LESEN! Lesen Sie die Betriebsund |
|
Wartungsanleitung Ihrer Maschine aufmerksam durch und |
|
machen Sie sich mit den Bedienelementen der Maschine gut |
|
vertraut um die Maschine ordnungsgemäß zu bedienen und so |
|
Schäden an Mensch und Maschine vorzubeugen. |
EN |
READ THE MANUAL! Read the user and maintenance |
|
manual carefully and get familiar with the controls n order to |
|
use the machine correctly and to avoid injuries and machine |
|
defects. |
DE |
SCHUTZAUSRÜSTUNG! Das Tragen von Gehörschutz und |
|
Schutzbrille ist Pflicht. |
EN |
PROTECTIVE CLOTHING! The operator is obligated to |
|
wear proper ear protection, safety goggles and gloves. |
DE |
CE-KONFORM: Dieses Produkt entspricht den EG-Richtlinien |
EN |
EC-CONFORM: This product complies with EC-directives |
DE |
Nur geschultes Personal! |
EN |
Only trained staff! |
DE |
Gefährliche elektrische Spannung! |
EN |
High voltage! |
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 6 |
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |
SICHERHEITSZEICHEN / SAFETY SIGNS
DE |
Bedienung mit Schmuck verboten! |
EN |
Operation with jewelry forbidden! |
DE |
Bedienung mit Krawatte verboten! |
EN |
Operation with tie forbidden! |
DE |
Bedienung mit offenem Haar verboten! |
EN |
Operation with long hair forbidden! |
DE |
Maschine vor Wartung und Pausen ausschalten |
|
und Netzstecker ziehen! |
EN |
Stop and pull out the power plug before any |
|
break and engine maintenance! |
DE |
Warnung vor Schnittverletzungen! |
EN |
Warning about cut injuries! |
DE |
Warnung vor rotierenden Teilen! |
EN |
Warning of rotating parts! |
DE |
Vor Nässe schützen! |
EN |
Protect from moisture! |
DE |
Allgemeiner Hinweis |
EN |
General note |
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 7 |
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |
SICHERHEITSZEICHEN / SAFETY SIGNS
DE |
Nicht auf die Maschine klettern! |
EN |
Do not climb onto the machine! |
DE |
Sicherheitsabstand einhalten! |
EN |
Keep safety distance! |
DE |
Warnung vor wegschleudernden Teilen! |
EN |
Warning against thrown-off items! |
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 8 |
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |
PREFACE
10 PREFACE
Dear Customer!
This manual contains information and important instructions for the installation and correct use of the drill press SB4115H/SB4115N/SB4116HM/SB4116HN.
Following the usual commercial name of the device (see cover) is substituted in this manual with the name "machine".
This manual is part of the product and shall not be stored separately from the product. Save it for later reference and if you let other people use the product, add this instruction manual to the product.
Please read and obey the security instructions!
Before first use read this manual carefully. It eases the correct use of the product and prevents misunderstanding and damages of product and the user’s health.
Due to constant advancements in product design construction pictures and content may diverse slightly. However, if you discover any errors, inform us please.
Technical specifications are subject to changes!
Please check the product contents immediately after receipt for any eventual transport damage or missing parts.
Claims from transport damage or missing parts must be placed immediately after initial product receipt and unpacking before putting the product into operation.
Please understand that later claims cannot be accepted anymore.
Copyright
© 2013
This document is protected by international copyright law. Any unauthorized duplication, translation or use of pictures, illustrations or text of this manual will be pursued by law.
Court of jurisdiction is the Landesgericht Linz or the competent court for 4170 Haslach, Austria!
CUSTOMER SERVICE CONTACT
HOLZMANN MASCHINEN GmbH
A-4170 Haslach, Marktplatz 4 Tel 0043 7289 71562 - 0
Fax 0043 7289 71562 – 4 info@holzmann-maschinen.at
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 25 |
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |
TECHNIC
11 TECHNIC
This user manual was wrote for more machines. At this point SB4116HN is representative for all models described. Small deviations from the other models are possible.
11.1Components
|
No. |
Specification |
|
No. |
Specification |
|
|
|
|
|
|
|
|
|
|
|
1 |
Base |
|
9 |
Motor |
|
|
|
2 |
Fixing screw table |
|
10 |
Tightening handle (motor) |
|
|
|
|
|
|
|
|
|
|
|
3 |
Release lever |
|
11 |
Scale drilling depht |
|
|
|
4 |
Table |
|
12 |
Handle |
|
|
|
|
|
|
|
|
|
|
|
5 |
Column |
|
13 |
Scale angle of table |
|
|
|
|
|
|
|
|
|
|
|
6 |
Drill chuck |
|
14 |
Handle |
|
|
|
|
|
|
|
|
|
|
|
7 |
On/Off/emergency-unit |
|
15 |
Motor pulley |
|
|
|
8 |
Pulley cover |
|
16 |
Safety-switch pulley cover |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 26 |
|||||
|
|
|
|
|
|
|
|
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS SB4115H/SB4115N/SB4116HM/SB4116HN |
TECHNIC
11.2Technical Details
Specification |
|
|
SB 4115H |
SB 4115N |
SB 4116HM |
SB 4116HN |
Voltage |
|
V/Hz |
230(400)/50 |
230(400)/50 |
230(400)/50 |
230(400)/50 |
|
|
|
|
|
|
|
Motor power |
|
W(S6) |
400 |
600 |
600 |
600 |
|
|
|
|
|
|
|
Spindle travel |
|
mm |
60 |
60 |
80 |
80 |
|
|
|
|
|
|
|
Spindle holder |
|
Type |
MT2 |
MT2 |
MT2 |
MT2 |
|
|
|
|
|
|
|
Chuck |
|
Type |
B16/3-16mm |
B16/3-16mm |
B16/3-16mm |
B16/3-16mm |
|
|
|
|
|
|
|
Speed range |
|
min-1 |
210-2580 |
180-2740 |
180-2740 |
180-2740 |
Range quantity |
|
Anzahl |
12 |
12 |
12 |
12 |
|
|
|
|
|
|
|
Distance spindle to column |
|
mm |
125 |
127 |
165 |
165 |
|
|
|
|
|
|
|
max. distance chuck-table |
|
mm |
810 |
235 |
430 |
670 |
|
|
|
|
|
|
|
max. distance chuck-base |
|
mm |
1180 |
355 |
630 |
1180 |
|
|
|
|
|
|
|
Table dimensions |
|
mm |
Ø 250 |
190x200 |
254x254 |
254x254 |
Pivoting range table |
° |
±45° |
±45° |
±45° |
±45° |
|
|
|
|
|
|
|
|
Total height |
|
mm |
1500 |
850 |
990 |
1630 |
Base dimensions |
|
mm |
410x240 |
170x160 |
456x280 |
456*280 |
|
|
|
|
|
|
|
Weight |
|
kg |
51 |
27 |
45 |
51 |
|
|
|
|
|
|
|
Further features of the machine:
Solid, bolished base with T-nuts
Aluminium motor according IP54
Torsion-resistant, solid and polished steel column
Tiltable worktsable
Spindle protection cover
Adjustable drill depht
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 27 |
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |
SAFETY
12SAFETY
12.1Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of misuse. The machine is used for drilling in wood, plastic and metal.
To use the machine properly you must also observe and follow all safety regulations, the assembly instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area. The same applies for the general rules of occupational health and safety.
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-Machines and its sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk factors.
W ARNI NG
Use only drills allowable for this machine!
Never use a damaged drill!
Use the machine never with defective or without mounted guard
HIGHEST RISK OF INJURY!
12.1.1Ambient conditions
The machine may be operated:
humidity |
max. 70% |
temperature |
+5°С to +40°С (+41°F to +104°F) |
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
12.1.2Prohibited use
The operation of the machine outside the stated technical limits described in this manual is forbidden.
Operation of the machine function without emergency stop button or impeller box with open doors is prohibited.
The use of the machine not according with the required dimensions is forbidden.
The use of the machine not being suitable for the use of the machine and not being certified is forbidden.
Any manipulation of the machine and parts is forbidden.
The use of the machine for any purposes other than described in 12.1 is forbidden.
The unattended operation on the machine during the working process is forbidden! It is not allowed to leave the immediate work area during the work is being performed.
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 28 |
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |
SAFETY
12.2Security instructions
Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and limit the use of this machine!
N O T I C E
In the following machine this guards are in effect:
Emergency button on the control panel
Shutdown when opening the motor pulley cover
Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid slippery floor.
Make sure the work area is lighted sufficiently
Do not overload the machine
Provide good stability and keep balance all times
Avoid abnormal working postures! Make sure you stand squarely and keep balance at all times.
Keep away from the running drill!
Always stay focused when working. Reduce distortion sources in your working environment. The operation of the machine when being tired, as well as under the influence of alcohol, drugs or concentration influencing medicaments is forbidden.
Do not climb onto the machine!
Attach the machine to the underground
Respectively trained persons only and only one person shall operate the machine.
Do not allow other persons, particularly children, to touch the machine or the cable. Keep them away from your work area.
Make your workshop childproof.
Make sure there is nobody present in the dangerous area. The minimum safety distance is 2m
Wear suitable work clothes! Do not wear loose clothing or jewellery as they might get caught in moving parts and cause severe accidents! Wear a hair net if you have long hair.
Use personal safety equipment: ear protectors and safety goggles when working with the machine.
|
|
|
|
|
|
|
|
|
|
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at |
|
Seite 29 |
||
|
|
|
|
|
|
STÄNDERBOHRMASCHINE / DRILL PRESS |
SB4115H/SB4115N/SB4116HM/SB4116HN |