HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
1. Overview
(Fig.1)
The
HOLUX
Wireless GPS Receiver (Fig. 1) is a total solution GPS
receiver with Bluetooth, UART interface and built-in rechargeable battery for high
sensitivity to tracking signal. design is based on SiRF Star III low power
Architecture.
is a dual-function GPS receiver. Not only transmit satellite information
through the PDA or Notebook with Bluetooth interfaces but also is a G-Mouse GPS
receiver through a data cable to deliver satellite signal to the device without Bluetooth
interface.
This positioning application meets strict needs such as car navigation, mapping,
surveying, security, agriculture and so on. Only clear view of sky and certain power
supply are necessary to the unit. contacts to other device through Bluetooth
device, compatible interface of RS-232 or USB, and built-in recharge battery to save
satellite information such as the status of satellite signal, the last location, date and time
of last use.
With low power consumption, the tracks up to 20 satellites at a time,
re-acquires satellite signals in 100 ms and updates position data every second.
Trickle-Power allows the unit operates a fraction of the time and Push-to-Fix permits
user to have a quick position fix even though the receiver usually stays off.
3
Page 5
HOLUX GPSlim236B Bluetooth GPS Receiver User’s Manual
2. Packing List
Congratulations on your purchase of the Wireless GPS Receiver. We
hope it will be useful to you for a long time. Before you begin, make sure that your
package includes the following items. If any of these items are missing, please contact
your local HOLUX dealer or distributor.
z HOLUX Wireless GPS receiver 1 Set
z Travel power supply / Cigarette adapter 1 Set
z Manual and Driver CD 1 Piece
z Quick guide 1 Piece
z Warranty card 1 Piece
Page 6
HOLUX GPSlim236B Wireless Bluetooth GPS Receiver Manual
3. Main functions
provides a series of functions. It is well suited to system integration and
users who use PDA, Notebook PC with Bluetooth device.
z Built in SiRF Star III Low power consumption chipset.
z 20 parallel satellite-tracking channels for fast acquisition and reacquisition.
z High speed signal acquisition using 200,000 time/frequency search channels.
z Built-in WAAS/EGNOS Demodulator without additional any hardware. Or use
the high-sensitive software to get the fast acquisition and reacquisition in the
urban, canyon and foliage environments.
z Compatible with Bluetooth Serial Port Profile (SPP) completely.
z Low power consumption. Built-in rechargeable and changeable Lithium-ion
battery without external power supply, and the working time lasts at least 10
hours.
z Provide Continue mode and Power saving mode for user’s requirement.
z Provide expand terminal contact to other system without Bluetooth device.
z Built-in rechargeable battery for memory and RTC backup and for fast Time To
First Fix (TTFF).
z Support NMEA0183 v2.2 data protocol and SiRF binary code.
z 4 colors LED to show the status of device.
z Active antenna connector for getting better satellites signal.
z FLASH based program memory. New software revisions upgradeable through
serial interface.
z Small, sleek, and lightweight design easily fits in your hand.
z Over-Temperature protection
z Enhanced algorithms -SnapLock and SnapStart provide superior navigation,
performance in urban, canyon and foliage environments.
z For Car navigation, Marine navigation, Fleet management, AVL, Personal
navigation, Tracking System, and Mapping device application.
5
Page 7
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
4. Technical Specification
4.1. Basic Specification
z Chipset:SiRF Star III chipset.
z Channels: 20 parallel satellite-tracking channels.
z Frequency: 1575.42 MHZ.
z Receiver: L1, C/A code.
4.2. Acquisition Time (averaged)
z Reacquisition: 0.1sec.
z Cold start: < 42 seconds.
z Warm start:< 38 seconds .
z Hot start: < 1 seconds
4.3. Receiver Accuracy
z Normal: 5-25 meters CEP without SA.
z Enable EGNOS or WAAS:
Position: < 2.2 meters, horizontal 95% of time
z Velocity: within 0.1 meters / second
z Time: 1 microsecond synchronized GPS time
4.4. Use Limitation
z Altitude: < 18,000 meters (60,000 feet)
z Velocity: :< 736 meters/ second (1000Knots)
z Acceleration: 4 G.
z Jerk: 20 meters / second, max
4.5. Power Supply
z External Voltage: 5VDC +/- 10%
z Batteries:
Main Power: Built-in rechargeable Lithium-ion for system power.
Backup Power: Rechargeable Lithium-ion battery for memory & RTC backup.
z Working voltage: 75-85mA (Normal mode).
< 5 meters, Vertical 95% of time
30mA (Power Saving).
z Working period (In Battery full power status):
> 10 hours on Continue mode.
> 16 hours on Power Saving mode.
z Protection circuit on should stop charging the cell when
over-temperature condition --50 occurs.
6
Page 8
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
I. Compatible Bluetooth Serial Port Profile (SPP), Version1.1 and class 2(up
to 10 meter range).
II. In/Out Port. GPS signal (Out)/Command(In) with CMOS/TTL Level。Mini
USB Type B Connector and Cable option:
(a) GR230-A1(RS232 data cable)
(b) GR230-A2 (USB data cable)
(c) GR230-A3 (Mini USB port to PS2 port ).
z External Antenna interface:
3.0V input MMCX type active antenna connector
4.7. Physical
z Size: 41 × 63 × 17.1 mm
z Weight
z Operating Temperature:-10 to + 60 (under the un-charging condition);
Charging Temperature 0
z Storage Temperature
z Operating humidity: 5% to 95% No condensing
: < 56 g
to + 45
: -20 to + 85
4.8. Other Functions
z Bluetooth frequency: 2.4 ~2.48GHZ
z Bluetooth Input Sensitivity: -80dbm
z Low sensitivity of receiving satellite signal
z External antenna interface: MMCX
z LED Functions: Indicate Bluetooth status, GPS status, Battery Status and
: -189 dBW
Battery charging status
7
Page 9
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
5. Getting Started
STEP 1. Charge Battery
Please charge battery till LED off for the first time.
Power cable plug in Power cable connect to power socket
↓
Charge Battery
Battery indicator light:
Power too low -------- red LED
Charging -------------- green LED
Full or Not in charging -- LED off
STEP 2. Turn on Power
Bluetooth Status –
Turn on power
Searching
Yes
Data
No
Blue LED blinking
(1time / 1sec)
No
Mini USB power
Yes
Yes
Stop data
transferring?
Yes
Reconnect
Transferring…
Blue LED blinking
No
(1time / 3 sec)
Waiting for
reconnection…
Blue LED blinking
No
(1time / 1sec)
Note:
Some PDAs have to re-open
Bluetooth manager for
Bluetooth device
re-connection.
8
Page 10
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
r
GPS Status ---
Put
for better satellite acquiring.
Turn on power
↓↓
Search GPS -- Power Off --
↓
Position Fixed --
in clear view of the sky without any obstruction
Turn off powe
Steady orange
LED on
Orange
Orange
LED off
LED blinking
5.1. Hardware Description
1). Body description see Fig. 2:
Power Jack
LED of Battery(Red / Green)
Bluetooth LED (Blue)
LED of GPS (Orange)
(Fig.2)
9
Page 11
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
2). LED status :
SYMBOL COLOR STATUS DESCRIPTION
1 times / 1 sec Search Bluetooth Device
Bluetooth
Blue Blinking
1 time / 1 sec Standby Mode
1 time / 3 sec Transferring Data
Red Light on Power too low
Battery
GPS
Green Light on In charging
N/A Light off Battery full or Not in charging
Light on Acquiring Satellites
Orange
Blinking Position Fixed
3). Power Switch :
a. Power on, Orange light is on.
b. Power off, Orange light is off.
4). External active antenna connector, see Fig.3
Connector type: MMCX.
Active power voltage: 3.0V
(Fig.3)
5). Power Jack & Data Port, see Fig.4
Jack type: Mating face of 5 pin Mini USB Type B female.
Pin definition see table 1.
5 1
(Fig.4)
10
Page 12
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
Table 1
Pin Pin Name Signal and description
1 GND Signal ground, Battery charging ground.
2 VOUT Unregulated voltage out: 3.6 V max 100mA.
3 TXD
Transmit Data. From organizer to peripheral.(Voltage Level
is 3.3V ~ 5.0V).
Receive Data. Form peripheral to organizer.(Voltage level
4 RXD
is 3.3V ~ 5.0V).
5
VCHARG
Positive terminal of DC adaptor that powers the internal
charging circuit of Li-Ion battery. The approved power
supply is 5.0V +/- 5%@1A.
6). Optional accessories, and connector description, see Fig. 5.
PC/Noteboo
kUSB port
USB Cable
(GR230-A2)
RS232 Cable
(GR230-A1)
USB Cable
(GR230-A2)
Mini USB
(Fig.5)
11
PC/Notebook
RS232 port
Page 13
HOLUX GPSlim236B Wireless Bluetooth GPS Receiver Manual
5.2. Software Installation
The following is the steps of software installation to setup on PDA, DELL AXIM with
Bluetooth Manager. For other PDA, the steps may be a little different.
( Bluetooth Manger is one of popular program used for Bluetooth device)
1. Open “Bluetooth Manager” on pocket
pc.
New
↓
Connect
2. Search Bluetooth device “HOLUX
”
Select Explore a Bluetooth device
↓
Next
3. Find the Bluetooth device
Next
↓
Tap HOLUX GPSlim236B
4. Connect to SPP Slave
→
→
Select SPP slave
↓
Next
↓
Finish
6. 5. Finish Bluetooth Manager Setup
Tap and Hold HOLUX GPSlim236B: SPP slave
↓
Connect
↓
Finish Bluetooth setup (opposite arrow is displayed)
→
→
12
Page 14
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
5.3. Installation of testing program
(GPSViewer.exe is compatible with Microsoft Pocket PC or other operation system
alike.)
1). Install Microsoft ActiveSync to your PC, refer to your Pocket PC manual for
installation procedure, as Fig. 5.
2). Setup your Pocket PC cradle to Desktop PC UART port. The Microsoft
ActiveSync will detect your Pocket PC automatically.
Setup your Pocket PC cradle to Desktop PC UART port. The Microsoft ActiveSync
will detect your Pocket PC automatically, as Fig. 7.
(Fig. 7)
3). Double click the GPSViewer.exe on your PC, then Holux GPSViewer.exe
program will install automatically, as Fig. 8.
(Fig. 8)
13
Page 15
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
4) Push “Start”→ “Programs”→ “GPSViewer” on PDA, as Fig. 9.
(Fig. 9)
5) The following window is show after executing GPSViewer, as Fig. 10.
(Fig. 10)
6) Setup Baud rate: 38400, then push “Scan” bottom to scan your COM Port
(Example theIPAQ 3970 is the output port COM8). Select your COM Port (COM1
~ COM10), then push “Open GPN” bottom, as Fig. 11, Fig. 12, and Fig. 13.
(Fig. 11) (Fig. 12) (Fig. 13)
14
Page 16
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
7) Select “GPS Status” to show the satellite diagram like below, as Fig. 14.
(Fig. 14)
6. Optional accessories
has many accessories to satisfy customers’ requirement see table 2.
After using with the following accessories, it can transmit message with
PDA, Note Book easily.
Table 2
Item Description Note
GR230-A1 1.5M RS232 data cable
GR230-A2 1.5M USB data cable
GR230-A3 Output convert to GM-210’s PDA Car charger adaptor
GR230-B1 2M 28db MMCX connector active antenna
15
Page 17
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
7. Driver Installation
You can use any accessories data cable without installing driver
except GR230-A2 USB cable. The following is the steps of installation GR230-A2
USB cable.
7.1 System Requirement
CPU: IBM, Pentium, or other compatible PC.
Memory: above 16 MB
System: Windows 98/Me/2000/XP
7.2 Installation
I. Copy entire USB folder from CD to hard disk.
II. Connect GR-230-A2 USB connector to computer without GPS
receiver. While the computer automatically starts the installation program,
please direct the driver to the USB folder.
7.3 Important
Verify the COM port to start using your own navigation software.
I. Click <Start> menu, select → <Setting>, then enter→ <Controller>
II. After entering <Controller>, and select <System>.
III. Select <Device Manager>.
IV. Find the < Connector(COM & LPT)> and check the Virtual COM Port, which
was created by the USB driver.
Please note that the virtual COM port number might be different from every
computer. Before using navigation software, please confirm the COM Port numbers
created by your computer and provided by your navigation software. Otherwise, the
navigating software won’t receive the satellite signal, because of the un-match
COM Port setting.
8. Warranty
The is warranted to be free from defects in material and functions for a
period of one year from the date of purchase. Any failure of this product within this period
under normal conditions will be replaced at no charge to the customers.
˙ has built Li-battery inside, please avoid closing high
temperature environment or sun shine directly for a long time.
16
Page 18
HOLUXGPSlim236B Wireless Bluetooth GPS Receiver Manual
˙User has to return to HOLUX if the inner Li battery has to be
replaced.
9. Trouble Shooting
Problems Reasons Methods
Connect an external antenna, which
Weak or no GPS signal can be
received at the place of
No position
GPSlim236
output but
locate as a open space to your
and then run GPSViewer
Cold start function.
timer is
counting
Execute fail Bluetooth function unstable
Can not turn
on the COM
port
Can not find
out
No Signal
At outdoor space but GPS signal
is blocked by building or car roof.
Install
or operate the device is being
used with same COM port
Poor connection
No action for few minutes may
cause Pocket PC entry power
save mode. It will close the COM
port at the same time.
incompletely
Go outdoor and run GPSViewer Cold start
function to try again, or connect an
external antenna to improve the poor
GPS signal.
Power On/Off
Re-Start PDA or PC and reference sec 5.2
re-install s
Install
other device that is being used.
Re-Start PDA or PC and reference sec.
5.2 re-install s
Close the application and execute it again
to reopen the COM port.
oftware
completely or stop
oftware.
.
Weak or no GPS signal when
using
indoor
Connect an external antenna to your
.
17
Page 19
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.