Holman cse12-208vcd Service Manual

Service Manual for the Lang Kit: SKXLH740-1,

Mercury switch service kit

Model:

CSE12 & CSE12-ACD

CSE12-1 & CSE12-208VCD

Star Manufacturing International 10 Sunnen Drive St. Louis, MO 63143
Part #: 2M-W368 Phone: [phone] Fax: [phone]
Rev. - www.star-mfg.com December 8, 2006

CONTENTS OF KIT

WIRING DETAIL

2 Rev. - 2006

INSTRUCTIONS FOR INSTALLATION

7

- Remove 4 screws indicated in illustration 1 & 2 to remove hood cover.
WARNING: With the hood cover removed the CSE12 unit will NOT be held in the down position.

-Remove 2 screws shown in illustration 3. Ensure that numbers on wires to existing mechanical switch
are legible. If not legible, renumber as indicated in illustration 4. Disconnect wires from mechanical
switch.

-Cut the connectors from the switch wires as shown in illustration 5 and strip each wire 3/8”. Install
mercury hood switch assembly with the two screws removed in previous step per illustration 6.

-Wire nut wires from the mercury hood switch assembly to corresponding existing wires as shown in
illustration 7. Tuck the wires and wire-nuts into the switch box as shown in illustration 8.

Illustration 1 Illustration 2

Illustration 4Illustration 3

Illustration 6Illustration 5

Illustration

Illustration8

-Replace hood cover.

3 Rev. - 2006