Hobart ML-134343, ML-134354 User Manual

Models
HL800 ML-134354
HL1400 ML-134343
INSTRUCTION MANUAL
701 S. RIDGE AVENUE TROY, OHIO 45374-0001
937-332-3000 · WWW.HOBARTCORP.COM
FORM 34985 (May 2007)
LEGACY 80-QUART AND 140-QUART MIXERS
– 2 –
TABLE OF CONTENTS
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Initial Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Standard Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Programmable Recipe Timer (Optional) . . . . . . . . . . . . . . . . . . . . 9
Bowl Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Agitator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Power Bowl Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Prepare for Mixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Timer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Operating Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Recipe Mode — To Enter and Exit . . . . . . . . . . . . . . . . . . . . . . . 14
Reviewing Recipe Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Running a Recipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Interrupting a Recipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Entering a Special Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Enter the Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Programming a Recipe [SEt ... rECP] . . . . . . . . . . . . . . . . . . . . 17
Programming a Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Making a Recipe Active or Inactive [Atth ... rECP] . . . . . . . . . . . 18
Setting the Access Code [SEt ... CodE] . . . . . . . . . . . . . . . . . . . 19
Unloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Wire Cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Agitators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
AGITATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
– 3 –
Installation, Operation and Care of
Legacy® 80-Quart Mixers
and
Legacy
SAVE THESE INSTRUCTIONS
The Legacy® 80-quart mixer is a heavy-duty mixer which features a 3-horsepower motor, digital Smart
TM
Timer A programmable Recipe Timer is optional. 60 and 40-quart bowls and a variety of agitators are also available.
and power bowl lift as standard equipment.
®
140-Quart Mixers
GENERAL
The Legacy
TM
Timer A programmable Recipe Timer is optional. 80, 60 and 40-quart bowls and a variety of agitators are also available.
Both models have four mix speeds and stir speed. A variety of agitators and accessories are available. These are described in a separate Use and Applications
Handbook, which is furnished on the Legacy Mixer Operator Training CD provided with each mixer.
®
140-quart mixer is a heavy-duty mixer which features a 5-horsepower motor, digital Smart
and power bowl lift as standard equipment.
– 4 –
INSTALLATION
UNPACKING
Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery.
LOCATION
Prior to installation, test the electrical service to assure that it agrees with the specifi cations on the machine data plate.
Place the mixer in its operating location. There should be adequate space around the mixer for the user to operate the controls and to install and remove bowls. The area above and to the right side of the mixer should allow the top and side covers to be removed for routine maintenance and servicing.
Once in position, the mixer must be leveled:
• Remove the two top cover screws and the top cover.
• Place a level on the top rim of the large pulley (Fig. 1). Slide shims under the base contact surface of the mixer as required to level it front-to-back and side-to-side.
• Do not replace the top cover until installation is completed.
Fig. 1
– 5 –
ELECTRICAL CONNECTIONS
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE
PORTION OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT/TAGOUT PROCEDURES.
3
A hole for
/4"-trade-size conduit is located at the top of the pedestal. Make electrical connections per the
wiring diagram located on the inside of the top cover. Three-Phase Mixer:
Connect fi eld supply lead wires to L1, L2 and L3.
• Connect ground wire to ground lug on the mixer.
INITIAL CHECKS Check Lubrication Before Use
This mixer is shipped with oil in the transmission. Check oil level before starting mixer (Fig. 2). Refer to Lubrication on page 23 for applicable lubrication procedures.
Operation
1. Turn the SPEED dial pointer to STIR.
2. Apply power to the mixer. With the bowl locked into place, the bowl support all the way up and bowl guard closed, momentarily run the machine by pushing the START and then STOP buttons.
3. Verify that the motor is turning counterclockwise (Fig. 2). If not, reverse any two lead wires.
4. Verify that the bowl lift actuator raises and lowers per the switch direction arrows.
Fig. 2
– 6 –
OPERATION
WARNING: MOVING AGITATOR IN BOWL, KEEP HANDS, CLOTHING AND UTENSILS OUT WHILE
IN OPERATION. DO NOT USE WITHOUT INTERLOCKED GUARD.
The Legacy® mixer is equipped with SmartTimerTM controls and a power bowl lift. Other operating parts (Fig. 3) and their functions are described throughout the Operation section.
The Wire Cage must be in position or the mixer will not operate. The bowl must stay in the locked position on the Bowl Support or the mixer will not operate. If the Bowl Support is not all the way up (mix position), the mixer will not operate unless the Start button
is pressed and held. If the Bowl Support is not at the mix position and the START button is pressed and held, the mixer will
operate only in stir speed.
Fig. 3
– 7 –
STANDARD CONTROLS Model HL800 and HL1400 (With Four Mix Speeds Plus Stir Speed)
Fig. 4
Mixer Speeds (Model HL800 and HL1400)
STIR (Slow) This speed is for incorporating ingredients at the start of each mixing process.
SPEED 1 (Low) This speed is for heavy mixtures such as pizza dough, heavy batters and
potatoes.
SPEED 2 (Medium-low) This speed is for mixing cake batters, mashing potatoes and developing
bread dough.
SPEED 3 (Medium-high) This speed is for incorporating air into light batches, as well as fi nishing
whipped items.
SPEED 4 (High) This speed is for maximum and accelerated air incorporation into light
batches.
– 8 –
PROGRAMMABLE RECIPE TIMER (OPTIONAL)
Fig. 5
Timer Specifi cations (Model HL800 and HL1400)
• Maximum number of programmable recipes: 9 recipes.
• Maximum number of steps allowed for each recipe: 6 steps.
• Maximum time allowed for each step in a recipe: 30 minutes.
For additional information on use of the programmable recipe timer, refer to pages 14 through 19.
– 9 –
Loading...
+ 19 hidden pages