Hobart CL44e General Manual

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

CL44e

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

STANDARD FEATURES

■ 202 racks per hour

■ Opti-RinSe™ system

■ Patent Pending Rapid Return Conveyor Drive

Mechanism

■ Insulated hinged double doors with door
interlock switches

■ Patent Pending Door Seal System

■ 19.5 inch chamber height opening

■ Top mounted micro-processer control module

■ Energy saver mode

■ Dirty water indicator

■ Low temperature alert

■ Conveyor dwell

■ Delime notication

■ Service diagnostics

■ NAFEM Data Protocol compliant

■ Patent Pending Computational Fluid Dynamic

Designed Self-Aligning Wash Manifolds

■ Stainless steel debossed anti-clogging wash
arms

■ Patent Pending Removable Integrated Pump
Intake Screen

■ Stainless steel self-draining pump and impeller

■ Single, sloping scrap screen and deep basket

■ Stainless panels enclose perimeter and bottom

■ Door actuated drain closure

■ Single point electrical connection (three phase

only)

■ Convertible hot water or low temp nal rinse

■ Vent fan and booster heater control

DISHWASHER

MODEL

❑ CL44e – Dishwasher

OPTIONS AT EXTRA COST

❑ Stainless steel pressure-less 15 KW or 30 KW

booster heater

❑ Higher than standard chamber

ACCESSORIES

❑ Stainless steel vent hoods

❑ Direct drive unloader

❑ Side loader

❑ Blower-dryer

❑ Drain water tempering kit

Specications, Details and Dimensions on Inside and Back.

CL44e DISHWASHER

DIRECTION OF OPERATION

❑ Right to Left

❑ Left to Right

VOLTAGE

❑ 208/60/1 ❑ 240/60/1 ❑ 380/60/3
❑ 208/60/3 ❑ 240/60/3 ❑ 480/60/3
  ❑ 600/60/3

F-40196 – CL44e Dishwasher Page 1 of 12

CL44e
DISHWASHER

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

THE CLe WAREWASHER IS NOW STANDARD WITH MORE EFFICIENT FEATURES THAN EVER . . .

Inside and out the CLe warewashers by Hobart are packed with standard components and patented design
innovations that make them the biggest value in the dishwasher industry.

Wash Manifolds. Patent pending Computational

The insulated hinged inspection doors provide easy
access in the chamber. Exterior wash pipes and
reduced interior bafes reduce clean-up time.
The patented Rapid Return drive allows for a wide
separation between the wash and the rinse zone.

Fluid Dynamic designed wash manifolds are self­aligning and come with Hobart’s signature debossed
anti-clogging nozzles for superior result.

The Hobart exclusive microprocessor control module
offers a choice of many features, such as an exclusive
Energy Saver Mode, Low Temperature Alerts, and
Dirty Water Indicator. It also displays pertinent
machine status and has a Delime Notication. The
controls have built-in Service Diagnostics and are
NAFEM Data Protocol Compliant.

Soil Management System. Screen design sheds soil
more easily than at screens, reduces frequency of
cleaning — easy to empty large soil particles . . . Just
lift out the scrap basket.

Opti-RinSe™. Hobart’s exclusive patent pending
Opti-RinSe™ signicantly reduces operating cost
by reducing rinse water and the energy required to
heat the water. The unique spray pattern uses large
droplets to more efciently sanitize the ware.

OTHER STANDARD FEATURES . . .

• Patent Pending Thermal Layer Curtains help keep
the heat inside the machine.

• Patented Ball Detent Clutch Conveyor Drive for
maximum protection against conveyor Jams

• Patent Pending Integrated Removable Pump
Intake Screen to offer the ultimate guard of keeping

debris from entering the pump.

• Patent Pending Hinged Door Seals and stainless
steel labyrinth seal for drip-free operation

• Low-Temp Convertibility In Field. All machines
shipped hot. Change software in eld at set up to
low temperature if desired – then, if requirements
change, convert from one mode to the other in the
eld. An exclusive feature – standard from Hobart.

• Door Actuated Drain Closure. Closing the door
automatically actuates drain closure, eliminates
extra manual steps, ensures that closure is in the
correct position.

Page 2 of 12 F-40196 – CL44e Dishwasher

CL44e

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

AVAILABLE OPTIONS AND ACCESSORIES . . .

Flexibility is synonymous with Hobart CLe dishwash ­ers. If your operation demands a dishwasher with a
vent hood, an extended hood . . . a power scrapper,
just specify the combination of options that suit your
needs.

Built-in Pressureless Stainless Steel Booster Heater.
Interwired and interplumbed. Saves on installation and
saves oor space. Simplies operation with just one
switch to power dishmachine and booster.

Side Loader. Save up to 20 square feet in the dishroom
layout with an optional C-Line Side Loader. Racks are
indexed 90° into the dishwasher automatically – a
feature that cuts space and reduces labor dramatically.
Your dishroom team will appreciate this feature.

OTHER AVAILABLE ACCESSORIES . . .

Blower-dryer, steam booster heater, and a single­point electrical connection to include electric booster
heater.

Machine Ratings (Mechanical)

Racks per hour (193⁄4" x 193⁄4") 202

Conveyor Speed - feet per minute 5.6 max.

Dishes per Hour (Average 25 per rack) 5,025

Glasses per Hour (Average 45 per rack) 9,045

Floor Space – Table to Table (Inches) 44

Overall Dimensions – H x W x D (Inches) 681⁄2 x 443⁄4 x 311⁄4

Motor H.P. 2

Conveyor Drive H.P.

Number of Tanks 1

Tank Capacity – Gallons 23

Pump Capacity –

Gallons per Minute - Weir Test 165

Heating Equipment –

(For keeping power wash hot)
Gas Burners (with Natural Gas) 78,000 BTU per hr.

Electric Heating Unit – Size Used 15 KW

Optional Booster Heater / Final Rinse 15 KW / 30 KW

Rinse – Minutes operated during hour of

maximum operation 60

Final Rinse Flow – Gals. per min.
At 15 PSI Flow Pressure 1.8

At 20 PSI Flow Pressure 2.1

Final Rinse Flow – Gals. per hr. – MAXIMUM
At 15 PSI Flow Pressure 108

At 20 PSI Flow Pressure 126

Rinse 20 PSI Flow Pressure
Gal./Rack

Steam Consumption –
Pounds per hr. - MAXIMUM
Approx. 30 lbs. per hr. = 1 boiler H.P. (BHP)
Dishwasher, based on 20 PSI steam and
on customer supplying final rinse water
at 180°F maximum 65

Steam Booster, if used on 20 PSI steam ­ 20 PSI water flowing - 130°F entering
water raised to 180°F min. 60

Exhaust Requirements –

Cubic Feet per minute

Peak Rate of Drain Flow – Gallons per minute.
(Initial rate with full tank) 38

Shipping Weight Crated – Approximate lbs. 613

DISHWASHER

CL44e

1

⁄6

Hot Water Sanitizing -

Chemical Sanitizing

.62 - 180°F – .62 - 120°F

Entrance End 200

Discharge End 400

F-40196 – CL44e Dishwasher Page 3 of 12

CL44e
DISHWASHER

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

Page 4 of 12 F-40196 – CL44e Dishwasher